E-flite Convergence VTOL PNP Electric Airplane / Multirotor Drone (650mm)
Versatile multirotor or nimble sport plane? The Convergence VTOL park flyer is both! Its exclusive flight control software makes transitioning between multirotor and airplane flight easier than it has ever been before. It’s even FPV-ready!
VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between hovering and airplane flight. The Convergence VTOL park flyer changes all that. Its unique design and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so smooth and predictable, you will feel right at home your first time on the sticks.
Sleek and Simple
Unlike complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Convergence™ park flyer uses a simple, yet sleek, delta-wing design with three brushless motors - two rotating motors on the wing and a fixed-position motor in the tail.
In multirotor flight the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate down into the horizontal position and the model's elevons take over pitch and bank control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.
Exclusive Flight Control Software Makes it Easy
At the heart of it all is flight control software that has been expertly tuned by designer, Mike McConville, so almost any RC pilot can experience the fun of VTOL flight.
The model is designed to accommodate several of the most popular FPV camera systems. There is a camera bay under the nose and a place to mount the video transmitter in the rear of the aircraft. Both locations are easy to access so installation takes just a few minutes.
Plug-N-Play: Super-Simple Receiver Installation and Transmitter Setup
This Plug-N-Play version can be flown with any 6+ channel aircraft transmitter. It gives you the option of using either a conventional receiver with standard servo connections or a serial receiver. Just connect whatever receiver you choose to the model's flight controller. No complex transmitter programming is required. You use the channel-5 switch for selecting Stability or Acro mode and the channel-6 switch to transition between multirotor and airplane flight.
Approximate Assembly Time: No assembly required
Completion Level: Plug-N-Play
Flying Weight: 1.7 lbs (771g)
Length: 26.9 in (680mm)
Minimum Required Radio: 6+ channel (not included)
Motor Size: 2210-1450Kv Main, 2730 - 1550Kv tail
Recommended Motor Battery: 2200-3000mAh 3S 11.1V LiPo (not included)
Trimscheme Colors: Black, Red, Silver
Wing Area: 291 sq in (1883 sq cm)
Wingspan: 25.6 in (650mm)
Needed To Complete:
This product was added to our catalog on April 24, 2017