Eagle Tree Systems eLogger V4 w/Wire Leads 100 Amps
This is the Eagle Tree Systems eLogger V4, with Wire Leads. Whether you’re into Electric Model Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.
The eLogger system comes with everything you need to log, analyze, and graph mAH, Current, Wattage, Voltage and throttle position, right out of the box. And, your eLogger is tremendously expandable, by adding additional sensors
eLogger V4 Enhancements:
Why should I choose the Eagle Tree eLogger?
Some ESC manufacturers are adding data logging to their products. However, these logging capabilities are limited, have very short logging times at high sample rates, and few if any additional sensors are available. While these built-in solutions may "whet your appetite" for data, this eLogger and its incredible array of sensors and powerful software will let you measure virtually anything you will ever need.
Also, investing in logging add-ons that are tied to a particular ESC means that the investment is only good as long as you use that ESC. Eagle Tree telemetry is portable across any ESC brand/model.
Finally, while the ESC manufacturers and others may lose interest in their logging capabilities if they don't sell well, you can rest assured that Eagle Tree will continue to enhance and expand our eLogger with additional features and sensors. Data is all we do!
PowerPanel LCD Display - a Gas Gauge for your Pack!
Now you can connect the optional PowerPanel lightweight LCD Display module to your eLogger! (Sold separately, Part #: ETRPOWER-PANEL)
This ultra thin LCD display connects to the eLogger with the included 11" data cable, and lets you get your max and live data displayed without a PC, just like the heavier, non-logging WattMeters on the market.
The display is fully programmable to show you your live and max Voltage, Amperage, Wattage Temperatures, RPM, mAH used, and more! Since you can know your mAH after your session, you know approximately how much juice is left in your pack!
Just connect it after your session for readback of live and max data. Or, since the PowerPanel is so light, it can easily be attached to the side of your model for live/max display all the time!
Features of the eLogger V4:
Voltage Measurement: approx 5V to 80V
Voltage Resolution: approx 0.02V
Current Measurement: up to 100 Amps peak
Current Resolution: approx 0.02 Amps
Current Draw: approx 30 mA with no sensors
Weight: Unit with Integrated Connectors: approx 0.8oz (22 grams), 100 amp unit with Wire Leads: 0.9 oz (25 grams)
Temperature: Dual inputs, 0 degrees F to 424 degrees F (three temperature inputs)
RPM range: approx 100 RPM to 50,000+ RPM
Units of Measure supported: English and Metric
Software Language Support: English, German, Chinese
Measurements: approx 2.25" x 1" x 0.5" (57mm x 28mm x 13mm) including sensor pins
Length of Wires with Wire Lead Version: approx 2.5" (65mm)
Record Time: Varies with sample rate, parameters being recorded, and "activeness" of the model. Anywhere from around 45 minutes to many hours is attainable depending on these settings
NOTE: Software is available for download via eagletreesystems.com, or by clicking here.
This product was added to our catalog on August 19, 2014