Conquest 10SC XB 1/10 RTR 2WD Short Course Truck by Helion RC w/2.4GHz Radio, Battery & Charger
This product was added to our catalog on July 11, 2017.
The Conquest 10SC XB is an off-roader that maintains all the advantages of existing Conquest XB cars including a high-performance 540 brushed motor, water-resistant electronics, four wheel independent suspension and adjustable oil-filled coil-over shocks. It has also been given a wide track LCG (low center of gravity) chassis, all-terrain tires, a light and impact-resistant composite construction and a rugged drivetrain complete with slipper clutch. The result is a vehicle thatís perfectly placed to satisfy a beginnerís need for superb handling and ease of maintenance, not to mention the possibility of a brushless upgrade as your skills increase.
With the included Helion 6-cell NiMH pack youíre set to enjoy a car that boasts surprising speed and that fully delivers on its promise to thrill. For Short Course fans, itís the only place to start.
- Ready To Run: The Conquest 10SC XB is supplied 100% factory assembled and ready to run. Included is a brushed power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ĎAAí batteries for the transmitter.
- Maintenance Made Easy: With hex bolts throughout, plus removeable front and rear chassis plates, maintenance is both convenient, quick, and cost effective.
- Non-integrated Electronics: In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and increase upgrade / tuning options.
- Adjustable Suspension: Anodized aluminum caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.
- Slipper Clutch: Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
- IKONNIK ET3 Transmitter:
- 2.4GHz operation avoids conflicts with other users.
- Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
- Low voltage warning.
- Switched third channel.
- Ergonomic grip, trigger and steering wheel.
- Steering dual rate.
- End point adjustment.
Motor: 540 brushed
ESC: 40A brushed
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 570mm (22.44in)
Height: 190mm (7.48in)
Width: 290mm (11.42in)
Wheelbase: 325mm (12.80in)
Weight (approx): 1.934Kg (4.26lbs)
Pair with: IKONNIK Krypton protocol
- Conquest 10SC XB
- ET3 3-channel 2.4GHz transmitter
- 2000mAh 6-cell 7.2V rechargeable NiMH battery
- Mains battery charger
- Quick-Start Guide
Needed To Complete:
- (4) "AA" Batteries (for transmitter)