Bullet Series 6A Dshot ESC w/BLHeli_S by EMAX
The EMAX Bullet Series of ESC's offer an excellent array of features that have became high in demand. The first clear feature is their physical size compared to competitors, forget the previous "small" ESC's within each amperage class because EMAX has shrunk the size down substantially. The BLHeli_S Firmware equipped on the Bullet ESC's also now support DSHOT*** and also Multishot, and OneShot protocols. Additionally the built in heat sink provides both lower overall core temperature and impact resistance against propeller strikes.
NOTE***: The Bullet 35A does not directly support DSHOT out of the package.
- BLHeli_S Firmware
- DSHOT/MultiShot/OneShot Support
- MOSFETS sourced from Toshiba Japan
- Murata Ceramic Capacitors
- 3oz High-TG PCB Board
Input Voltage: 2 cells, 2S LiPo
Constant Current: 6 Amps
Burst Current: 10 Amps
Weight: 2.5g w/ wires, 2.1g bare board (wires removed)
Dimensions: 9.4x21.5x4.35mm (board dimensions only)
Motor Wire: 22awg
Battery Wire: 22awg
Throttle Wire: 90mm
This product was added to our catalog on February 21, 2017.