Bittydesign Liquid Mask (16oz)

Very good stuff, I've painted 5 bodies with it now. I was using Bob Dively's masking for the last few years. The bittydesign mask is winning me over very quickly, it takes only 3 coats (brushed on) to mask a shell apposed to 5 with Dively's. I have found that designs cut in the bittydesign mask likes to peel out better than divelys, and the pink coloration of the bittydesign mask makes it a bit easier to see blade lines in. The only thing negative I can think of is that the large jug isn't stock.

Works pretty good. Just use 2 or 3 coats. 2 coats is more difficult to work with.

Works great, I've been spraying it on with a 1.7mm HVLP spray gun. Goes on well, didn't need to thin it at all. Hit it with the hairdryer to speed up the drying between coats.

I've just finished a bottle and managed to coat 7 bodies (1/10 trucks, buggies and and a 1/8 buggy body). Probably could play with the settings on the spray gun or thinning for a lighter spray but I'm not worried about trying to stretch it further.

The smell other people mention doesn't bother me. Will go for the bigger bottle next time.

Compared to Bob Dively this stuff takes forever to dry. Sometimes even overnight is not enough! The pink colour makes is hard to tell when it’s dry. Once it is dry it works good but not worth the hassle. Several times as I’m cutting the film it pulled off due to not being completely dry. What makes it worse if the previous layer is not completely dry and apply another layer, It locks in the previous layer which will never dry. Had to completely remove liquid mask and reapply on several bodies and reapply. Never had to do this with Bob Dively.

Works good, but takes forever to dry and seems too thin. Use the Bob Divery stuff, I won't be using this stuff again.

Very good. Use only 2 coats. Easy to cut and pull out of bodies.