Battery Jumper Box by Scale By Chris
The Scale By Chris Battery Jumper Box is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This jump box features printed handle and clamp details and will look awesome in the back of your scale rig. The jump box measures approximately 10mm deep, 25mm wide and 26mm tall and can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the box in place.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on February 2, 2017.