AX10 8 Degree Brass Knuckle Weight Set (2) by Vanquish Products
$1.99 Flat Rate Shipping!
This item is eligible for $1.99 flat rate shipping Learn More
This is a set of two Vanquish Products AX10 8 Degree Brass Knuckle Weights.
- Specifically designed to work w/Vanquish Products Wheels and VP 8 Degree knuckles.
- Precision CNC machined from solid 1-5/8" brass rod.
- Outer diameter is 1.600 Inches.
- Weighs in at 3.5 OZ or 99 grams.
- Easy to install, front mount with 3 screws.
- Allows full 50 degree steering in both directions and clearance for steering link.
- Precision fit with Vanquish Products 8 degree knuckle. Leaves no room to move under impact.
- Installation does not cause bearing distortion.
- Knuckle weights fit all Vanquish Products 2.2 Wheels. Depending on hub you may be limited on the number of weight rings you can run. See below for a complete list.
- Use some Brasso brass polish for long lasting shine.
- Use low strength locktite to ensure mounting screw do not come loose over time, do not over tighten screws, they only need to be snug.
- SLW Wheel w/225 hubs can add 2 1/8 rings = 4.88oz.
- SLW Wheel w/350 hubs can add 3 1/8 rings = 5.57oz.
- SLW Wheel w/475 hubs can add 4 1/8 rings = 6.26oz.
- SLW Wheel w/600 hubs can add 5 1/8 rings = 6.95oz.
- SLW Wheel w/725 hubs can add 6 1/8 rings = 7.64oz.
- SLW Wheel w/850 hubs can add 7 1/8 rings = 8.33oz.
- DH Procomp Wheel w/335 hubs can not add rings
- DH Procomp Wheel w/460 hubs can add 1 1/8 rings = 4.19 oz.
- DH Procomp Wheel w/585 hubs can add 2 1/8 rings = 4.88oz.
- DH Procomp Wheel w/710 hubs can add 3 1/8 rings = 5.57oz.
- DH Procomp Wheel w/835 hubs can add 4 1/8 rings = 6.26oz.
- DH ProCOmp II w/335 Does Not Fit.
- DH ProCOmp II w/460 Does Not Fit.
- DH ProCOmp II w/585 Does Fit, but no extra rings.
- DH ProCOmp II w/710 hubs can add 1 1/8 rings = 4.19oz.
- DH ProCOmp II w/835 hubs can add 2 1/8 rings = 4.88oz.
This product was added to our catalog on July 21, 2016.