Avid RC EB410 Titanium Lower Shock Screws

Avid RC EB410 Titanium Lower Shock Screws
In Stock Online
Usually ships in 24 hours
$1.99 flat rate shipping! Learn More
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.

The Avid EB410 Titanium Lower Shock Screws offer two left and two right hand threaded screws with a 5.5mm socket head so you only need to grab one wrench when taking your shocks off. As if that wasn't enough already, Avid included the innovative center-drilled hole for easy docking of your calipers while measuring shock lengths.

NOTE: Two of these screws are Left Hand Threaded so you screw them in by turning your wrench counter-clockwise. If you place your car on your pit table in front of you and you have the front end facing you, you put the left hand threaded screw in the left arm. If you spin the car around so the rear is facing you, you put the left hand threaded screw in the left arm. The reason for this is because the action of the arm going up and down places enough leverage on the screw and it can unscrew itself.


  • Machined from billet 6Al-4V Titanium.
  • 2 Right-hand, 2 Left-hand threaded screws. The Left-hand threaded screws are laser etched with an “L”.
  • Center-drilled to locate calipers for precise shock length and droop measurements.
  • Use the same 5.5mm hex driver for shock tops and bottom mounts.
  • Lose weight and add "bling" over the kit steel screws (0.8g/ea).
  • Each package includes 4 lower shock mount screws (2 LH, 2 RH) and 1 AVID mini decal sheet.

    This product was added to our catalog on February 19, 2018