Align Multi Function Tester

Align Multi Function Tester
In Stock Online
Usually ships in 24 hours
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.

This is the Align Multi Function Tester. 


  • 3A BEC Output.
  • For RC model electrical equipment diagnostic and measurement use.
  • High precision display of individual cell voltage for 2 to 8S lithium packs. In addition to individual cell voltage, it also displays total pack voltage as well as a percentage of pack's remaining capacity.
  • Displays serial cell count in a pack, as well as highest and lowest cell voltage, and the voltage difference.
  • Servo diagnostic feature. Displays BEC output voltage and receiver signal output.
  • Digital tachometer to display 2 to 7 propeller rotating speed as well as memory for highest RPM attained.
  • Reverse polarity protection for cell input.     

Voltage measurement range:
2-8S Lipo/Li-ion.
Voltage display resolution: 0.001V
PPM manual signal output: 2270us-770us
PPM automatic signal output: 1520us ±(120-630us)
Number of propeller measurable: 2 to 7
Propeller rotating range: 1-60000RPM, measurement distance: 5-15cm
BEC input voltage range: 4-7v w/3A BEC Output
Battery input terminal spec: 2.5mm pitch pins, compatible with Align compatible balancing plugs.

(1) Balance adapter D (Compatible with TP balance plug of same specification)

This product was added to our catalog on October 25, 2013