Navigation

  • Great Planes Manufacturing U-Can-Do 3D .46 Arf

    Product Number GPMA1269
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes U-Can-Do 3D .46 Aerobatic Airplane. Slow flight characteristics suitable for first...*More

    This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes U-Can-Do 3D .46 Aerobatic Airplane. Slow flight characteristics suitable for first time low wing pilots. Increase control throws to 3D levels for thrilling aerobatic performance. For Intermediate to Advanced Modeler/Fliers. NOTE: For maximum 3D aerobatic performance, choose an engine in the upper power range. Muffler: Stock type supplied with engine. Engine mounts in inverted position. Radio: Four channel minimum, Six channel computerized radio recommended for maximum flexibility and performance. Servos: Standard size 2 ball bearing-Aileron, 2 ball bearing-Elevator 1 high torque-Rudder, 1 standard-Throttle. Servo Extensions: Two 6 (152mm) for ailerons and one 24 (610mm) for rudder and two 24 for elevator. Y-Harness: One, for aileron servos, unless using computer radio. Servo reversing y-harness for elevator servos unless using comp radio Misc. Items: Glow plug, + foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment. Control Throws- Elevator: High Rate(3D) Up & Down 2+ (57mm) Low Rate 1 (25.4mm) Rudder: High Rate(3D) Right & Left 3+ (89mm) Low Rate 1+ (38mm) Ailerons: High Rate(3D) Up & Down 2+ (63.5mm) Low Rate 1+ (32mm) The U-Can-Do 3D is covered with the following MonoKote colors: Jet White (TOPQ0204) True Red (TOPQ0227) Insignia Blue (TOPQ0207) Cub Yellow (TOPQ0220) If a replacement fuel tank is needed, an 8oz (240cc) tank like SULQ1439 can be used. Some minor modification may be needed as this is not the exact shape of the original tank AJW 5/31/03 ir/jxs updt jxs 6/16/03 updt jxs 10/16/04 MonoKote colors checked & matched updated tjt 022305*Less

    Rating:
    Print This Page
    • Bottom of wing is large Blue and White checkerboard pattern.
    • Building Time: Ready to fly in as little as six to eight hours.
    • Canopy: Single, clear plastic.
    • Color scheme is White with swirls of Red, Dark Blue, and Yellow on the tail and wingsections.
    • Construction: Balsa and plywood.
    • Cowling: Pre-painted White fiberglass-reinforced cowl and wheel pants
    • Dual Aileron Servos: Standard size with at least 50 oz-in torque.
    • Fully symmetrical, mid-wing placement.Covering: Factory applied Top Flite MonoKote.
    • Landing Gear: .12 (3mm) thick pre-formed aluminum.
    • Warranty Period: Great Planes warrants this kit free from defects in both material and workmanship at date of purchase.
    • Wings: One-piece all wood, attaches to fuselage with two +-20 nylonwing bolts (included).
    • Warranty Period: Great Planes guarantees this kit to be free from defects in both material and workmanship at the date of purchase.
    • Airfoil:Fully-symmetrical mid-wing
    • Center of Gravity:4+ (120mm) Back from the wing's leading edge
    • Engine:1.5¦ down, 2¦ right
    • Length:58.5 (1486mm)
    • Stab:0¦
    • Weight:5 - 5lbs 10oz (2268-2551g)
    • Wing Area:904 sq in (58.3 sq dm)
    • Wing Loading:12.7-14.3 oz/sq ft (39-44 g/dm2)
    • Wing:0¦
    • Wingspan:56.75 (1441mm)
    • ~4 channel radio minimum, 6 channel computerized radio recommended
    • ~1 - high torque servo, 1 standard servo, 4 ball bearing servos
    • ~3 QTY - 24" servo extensions
    • ~2 QTY - 6 inch servo extension
    • ~.32 - .50 cu in (5-8cc) 2-stroke OR .52 - .70 cu in (8-11cc) 4-stroke engine
    • ~Propeller that is compatible with selected engine
    • ~1/4" foam rubber padding
    • ~Building and Field equipment
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of