Navigation

  • Great Planes Manufacturing Super Stearman 1.20 Bipe ARF .91-1.20 71.5

    Product Number GPMA1350
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes Super Stearman 1.20 Sport Airplane Kit. For Intermediate to Advanced Modeler/Flier...*More

    This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes Super Stearman 1.20 Sport Airplane Kit. For Intermediate to Advanced Modeler/Fliers, IMAA legal. COMMENTS: Following are the colors used on this model and order numbers for 6 foot rolls: White: TOPQ0204 True Red: TOPQ0227 Black: TOPQ0208 For replacement landing gear wheels, order the DuBro 4 Diameter Wheel (DUBQ0845). They are slightly larger than the original wheels but will fit. If axles are needed, order the 3/16 x 2 Axle Shafts (DUBQ1115). The holes in the landing gear will have to be slightly enlarged. If a replacement fuel tank is needed, order the Sullivan 24oz tank (SULQ1444), or the DuBro 24oz tank (DUBQ0224). Some minor trimming and modifications may be required. jxs 2/25/04 updated wm 6/18/04 updated missle red monokote cc 7/20/04 updt jxs 10/13/04 MonoKote colors checked & matched updated tjt 022305 updt jxs 11/16/09 updt jxs 05/09/12*Less

    Rating:
    Print This Page
    • Aileron Control: Four servos, coupling rods are supplied if modeler desires two servo control
    • Building Time: Ready to fly in 16-20 hours
    • Cabanes: Painted metal
    • Cockpit Features: Instrument decals
    • Construction: Balsa and plywood
    • Covering: Top Flite MonoKote, color scheme is predominately White with with Red and Black accents, see COMMENTS for MonoKote colors
    • Cowl: Painted fiberglass with inner plywood ring that provides strength and allows cowl to be attached with no visible screw heads
    • Hardware: Full set included
    • Interplane Struts: Painted fiberglass
    • Landing Gear: Aluminum with steerable tailwheel
    • Motor Mount: Composite, two-piece construction
    • Open Cockpit: Two with fully detailed and painted pilot figures, trimmed and detailed clear plastic windshields, rubber cockpit coaming
    • Radio Compartment: Plywood reinforced, accessible over lower wing
    • Spinner: 2+ (63mm) aluminum
    • Wheel Pants, and Landing Gear Fairings: Fiberglass, painted to match covering scheme
    • Wheels: Two 3+ (95mm) foam, one 1+ (32mm) foam tailwheel
    • Wings: Balsa and plywood, both one-piece, semi-symmetrical airfoil
    • Ailerons:Up & Down
    • Airfoil:Semi-symmetrical
    • Bottom Wing:9/16 (14mm) 1 (25mm)
    • Bottom Wingspan:69 (1755mm)
    • Center of Gravity:5+ (140mm) Back from the leading edge of the
    • Elevator:Up & Down 7/8 (22mm) 1 (25mm)
    • Engine Thrust:1¦
    • Length:57 (1450mm)
    • Right:3¦
    • Rudder:Right & Left 1 (25mm) 1+ (38mm)
    • Stabilizer:0¦
    • Top and bottom wing:0¦
    • Top Wing:+ (19mm) 1+ (32mm) up
    • Top Wingspan:71.5 (1815mm)
    • Total Wing Area:1466 sq in (94.70 sq dm)
    • Weight:14-15lb (6.35-6.8kg)
    • Wing Loading:22-23.5 oz/sq ft (67.13-71.71g/sq dm)
    • ~4 Channel radio
    • ~Servos: 5 standard sized servos - 1 42 oz/in torque minimum for throttle & 4 - 54 oz/in high torque servos
    • ~2 QTY - 12" servo extensions
    • ~1 QTY - Y-Harness for aileron
    • ~.91 cu in (14.9cc) 2-stroke OR .91 (19.66cc) 4-stroke engine
    • ~Muffler: Pitts style for 2-stroke or standard for 4-stroke engine
    • ~1/4" foam rubber padding
    • ~Propeller that is compatible with selected engine
    • ~Building and Field equipment
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of