Navigation

  • E-Flite Mini Ultra Stick ARF

    By E-Flite |
    Product Number EFL2250
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the ...*More

    Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps. *Less

    Rating:
    Print This Page
    • 95% factory-built; get flying in 2 hours or less
    • Bolt-on tail requires no gluing and secures with two lock nuts
    • Control surfaces have factory-installed hinges and control horns
    • Covered in genuine Hangar 9 UltraCote
    • Design based on Hangar 9 s popular line of Ultra Sticks
    • Easy access top battery hatch
    • Great match for E-flite Park 450 Outrunner Brushless Motor
    • Includes molded firewall stick mount
    • Lightweight balsa and plywood construction
    • Optional quad-flap configuration
    • Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
    • Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes
    • Two firewall options to use a variety of motor sizes, types & brands
    • Approx. Assembly Time1-2 hours
    • Approx. Flying Duration10-20 minutes
    • CG (center of gravity)2.50 in (63mm) behind the leading edge
    • Control Throw (Ailerons)1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
    • Control Throw (Elevator)9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
    • Control Throw (Rudder)7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
    • FlapsYes (optional)
    • Flying Weight22 - 25 oz (625 - 710g)
    • Gear Ratio6.5:1 when using Park 400 Brushless Inrunner
    • Hardware IncludedYes
    • Motor SizePark 400 Inrunner or Park 450 Outrunner
    • Overall Length34 in (865mm)
    • Prop Size10x7 - 11x7
    • Radio4-channel or greater (7-channel for quad flaps)
    • Recommended Battery2100 mAh 3-Cell 11.1V Li-Po
    • ScalePark Flyer
    • Servos4 sub-micros (6 sub-micros for quad flaps)
    • Speed Control20A Brushless
    • Trim Scheme ColorsUltraCote Fluourescent Blue, Flame Red, Transparent Red & White
    • Wing Area325 sq in (21 sq dm)
    • Wingspan38.75 in (985mm)
    • ~Coming Soon
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of