• Terrain Construction Materials

  • Showing: 1 - 30 of 35
    Sort by:
    Product description
    Woodland Scenics Shaper Sheet, 18" x 72"

    This is the 18x 72 Shaper Sheet from Woodland Scenics. COMMENTS: Due to small parts that could cause a choking hazard please keep tlc 4/8/14

    • Shaper Sheet
    $29.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Realistic Water, 16 fl oz.

    Use to model still or slow-moving water, such as ponds, rivers, lakes and more. Pour directly from the bottle. Realistic Water is self-leveling. Pour no more than 1/8 deep. Dries clear in approximately 24 hours and the bottle covers an area 17 in diameter when poured to the recommended depth of 1/8 .

    • 16 fuid ounces
    • Contents covers 17" diameter area at recommended depth
    • Make lakes ponds and rivers with ease
    • No mixing required - pours directly from the bottle
    • Recommended maximum layer depth of 1/8"
    $23.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Flex Paste, 16oz.

    Flex Paste(TM) 1 Pint -- Scenery Filler/Coating Material

    • 16 fluid ounces
    • Excellent for creating a road base or as a underwater sealer
    • Flexible, non-cracking modeling paste
    • Use to create a hard surface or as a filler on styrofoam
    $19.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 2" Foam Incline Set

    Inclines are flexible and allow a smooth transition from one height to another. To install, center the incline on the Riser, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444). Starters are identical pieces that can be used alone or with sets to start your track on an incline.

    • Each piece is 2-1/2" wide x 24" long
    • Elevates track 4" in 16 feet
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $19.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Easy Rock Carving Tools

    This is the Easy Rock Carving Tools from Woodland Scenics. COMMENTS: Due to small parts that could cause a choking hazard please keep tlc 4/8/14

    • Easy Rock
    $19.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 3" Foam Incline Set

    Inclines are flexible and allow a smooth transition from one height to another. To install, center the incline on the Riser, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444). Starters are identical pieces that can be used alone or with sets to start your track on an incline.

    • Each piece is 2-1/2" wide x 24" long
    • Elevates track 4-1/2" in 12 feet
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $19.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Latex Rubber, 16oz.

    Latex Rubber (16oz.)

    • 16 fluid ounces
    • Create a long-lasting mold with just a few coats
    • Thin enough to seek detail and think enough to be durable
    • Works well for making your own hopper loads, rocks or other molds
    $17.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Water Effects, 8 fl oz.

    Water Effects(TM) -- 8oz 237ml

    • 8 fluid ounces
    • A heavy-bodies, moldable product that will hold it's shape
    • Dries clear in about 24 hours
    • Use to create pond ripples, waterfalls or rapidly moving water
    $17.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics River/Waterfall Learning Kit

    Teaches modelers how to create the illusion of water depth, make a river and a waterfall.

    • Includes realistic water, water effects, plaster cloth, talus, fine turf, scenic glue, earth colors liquid pigment and applicator
    • Makes 2-1/2" x 9" river and 2-1/2" x 4" waterfall
    • Resealable package for storage
    $16.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Shaper Sheet, 9" x 72"

    This is the 9x 72 Shaper Sheet from Woodland Scenics. COMMENTS: Due to small parts that could cause a choking hazard please keep tlc 4/8/14

    • Shaper Sheet
    $15.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Plaster Brush Set

    This is the Plaster Brush Set from Woodland Scenics. COMMENTS: Due to small parts that could cause a choking hazard please keep tlc 4/8/14

    • Plaster Brush
    $15.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 3" Foam Sheet

    Use Foam Sheets to create flat areas for towns. You can also use them for tunnels, contour supports and layout bases. Build supports from scrap foam to elevate the Foam Sheets and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 12" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $15.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics E-Z Water, 16oz.

    Heat and pour E-Z Water according to package directions, to form ponds, streams, rivers and harbors. Non-toxic, low-odor product that hardens in minutes. Can be reheated with a heat gun to mold various accents, such as ripples, waves, rapids and to remove scratches.

    • Bag contains 28 cubic inches of material
    • Dries quickly, but can be re-heated to mold various accents or make repairs
    • Heat-activated product used for modeling small bodies of water
    $14.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 4" Foam Incline Set

    Inclines are flexible and allow a smooth transition from one height to another. To install, center the incline on the Riser, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444). Starters are identical pieces that can be used alone or with sets to start your track on an incline.

    • Each piece is 2-1/2" wide x 24" long
    • Elevates track 4" in 8 feet
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $14.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics ReadyGrass- Water Kit

    The Realistic Water covers 32 square inches and the Base Paint covers a 240 square inch area. The kit includes a Scraper, Foam Brush, Base Paint and Realistic Water.

    $12.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 2" Foam Sheet

    Use Foam Sheets to create flat areas for towns. You can also use them for tunnels, contour supports and layout bases. Build supports from scrap foam to elevate the Foam Sheets and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 12" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $12.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Shaper Sheet Plaster

    This is the Shaper Sheet Plaster from Woodland Scenics. tlc 3/28/14

    • Shaper Sheet
    $11.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics CLARVING PLASTER

    This is the Carving Plaster from Woodland Scenics. tlc 3/28/14

    • CLARVING PLASTER
    $11.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Plaster Cloth 8 X 10' Roll

    A simple, convenient and lightweight way to create a durable terrain shell. Just wad newspaper and stack to form desired terrain areas. Hold the wads in place with masking tape. Dip Plaster Cloth in water and smooth over terrain areas. The Plaster Cloth will dry to a hard shell.

    • 10 square feet
    • 8" wide x 15' long roll
    • Dries to a hard shell
    • Easy to use
    $11.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Lightweight Hydrocal 1/2 Gallon

    Lightweight Hydrocal has been specifically formulated for terrain model builders and is half the weight of traditional Hydrocal. Mix according to the instructions and pour into rock molds to create various formations. Also great for creating hard shell terrain and for filling in around rocks and other castings.

    • 1/2 gallon / 104 cubic inches
    • Special light weight casting plaster
    • Use with rock molds to create different formations
    $11.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Mold-A-Scene Plaster 1/2 Gallon

    A plaster material that can be shaped like modeling clay, but sets like plaster. It can also be used as a texturizing compound. It's longer setting time allows a modeler to add terrain contours to new or existing scenery. Mold-A-Scene Plaster is excellent for dioramas, layouts and models as well as volcanoes and other school projects.

    • 1/2 gallon / 104 cubic inches
    • Dries overnight
    • Excellent for school projects
    • Extended drying time allows for shaping and molding
    • Sets hard like plaster
    $11.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 8" Foam Profile Boards 2pc

    Profile Boards create the perimeter of your layout to define the contours. Their special interlocking design make them easy to join together with the use of matching Connectors. They can be placed end-to-end or stacked and locked together, then trimmed with a Hot Wire Foam Cutter (WOOST1435) to create mountain profiles.

    • Each piece is 8" tall x 24" long
    • Includes 2 Profile Boards and 2 Connectors
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $10.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 2" Foam Riser 4pc

    Risers are flexible. They easily form curves and can be used on a plywood or foam base. Use at least 2" risers to elevate your track. To install, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 2-1/2" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $10.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 4" Foam Riser 4pc

    Risers are flexible. They easily form curves and can be used on a plywood or foam base. Use at least 2" risers to elevate your track. To install, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 2-1/2" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $10.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Modeling Sheets, 1/8 x 16 x 18"

    This is the 1/8 Modeling Sheets from Woodland Scenics. COMMENTS: Due to small parts that could cause a choking hazard please keep tlc 4/8/14

    • Modeling Sheets
    $9.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 1" Foam Riser 4pc

    Risers are flexible. They easily form curves and can be used on a plywood or foam base. Use at least 2" risers to elevate your track. To install, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 2-1/2" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $8.99
    Add to Cart
    Qty:
    Product description
    American Art Clay Sculptamold 3LB Bag

    This dry, white, non-toxic modeling material produces objects that are very lightweight, strong and durable.

    • Adheres to most surfaces.
    • Can be sanded, sawed, carved or nailed without chipping.
    • Combines the best features of clay, plaster and paper mache.
    • Easy to prepare, easy to model and economical to use.
    • Lightweight and does not shrink when drying.
    • May be decorated with almost any type of paint or decorating medium.
    • May be oven dried at 200 degrees.
    • Mixes easily and quickly with water for immediate use.
    • Models like clay and sets up plaster hard in 30 minutes.
    • Use for modeling, casting or carving.
    $8.60
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 3/4" Foam Riser

    Risers are flexible. They easily form curves and can be used on a plywood or foam base. Use at least 2" risers to elevate your track. To install, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 2-1/2" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $7.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 1" Foam Sheet

    One sheet of 1' x 2' 1" Styrofoam. This is Step-4 among the simplified and improved 5-step layout system for beginners and advanced modelers. It's a Woodland Scenics Subterrain Lightweight Train Layout System for creating an outdoor environment.

    $6.99
    Add to Cart
    Qty:
    Product description
    Woodland Scenics Sub Terrain 1/2" Foam Riser 4pc

    Risers are flexible. They easily form curves and can be used on a plywood or foam base. Use at least 2" risers to elevate your track. To install, butt sections tightly, pin in place with Foam Nails (WOOST1432) and attach with Low Temp Foam Glue (WOOST1446) or Foam Tack Glue (WOOST1444).

    • Each piece is 2-1/2" wide x 24" long
    • No expensive power tools, complicated calculations or dusty mess
    • No experience necessary
    $6.99
    Add to Cart
    Qty: