Hop-up LCG chassis set for the Slash.
Enter the Mos Eisley Cantina™ including droid scanner, bar, slide-out floors, opening roof, plus a Landspeeder, dewback and 8 minifigures.
Big Bore shocks (xx-long) (hard-anodized Teflon-coated T6 aluminum) (assembled) w/ red springs, TiN shafts (8 pack). Teflon is a trademark or registered trademark of E.I. DuPont de Nemours and Co. Corporation, Wilmington, Delaware.
This is the 12.3 (313mm) Wheelbase Links Set for the Axial SCX10 TR Vehicles. COMMENTS: Also available in 11.4 (210mm) Wheelbase (AXIC0549) This kit includes the steering links. lmm 5.24.10 ir/jxs
Made from High grade Carbon Steel and Hardened to perfection! Involute MIP Spline Technology for smoother telescoping action! Designed using Castle Creations Monster Mamba Brushless Systems for testing! Fits Stampede and Rustler Electric and VXL New KEYED AXLE features a product design enhancement to the 12mm Hex Adapter and added support products for the utmost fit within the tight tolerances on Traxxas vehicles. NOTE** RE: ProTrac Suspension Kit for the Slash 4 4 **While the stock axles will work with the ProTrac Suspension Kit, some customers may want a heavy duty CVD option for their truck (for Racing or Extreme Bashing purposes). The following MIP option has been confirmed to work with the kit: MIP #10133 X-Duty Front Axle (2 Required for Front Left and Front Right) MIP #11104 X-Duty CVD Kit (2 Required for Front and Rear) **Source: Pro-line
X-Duty Rear CVD Kit: ST 4x4 VXL
This is the optional MIP X-Duty Rear CVD Kit for the Traxxas Slash 4X4. lmm 07.20.10 ir/jxs
Made from High grade Carbon Steel and Hardened to perfection! 5/8 diameter CVD Joint with 3/32 Drive Pin for added strength! Involute MIP Spline Technology for smoother telescoping action! Designed using Castle Creations Monster Mamba Brushless Systems for testing! Fits Slash 4x4 New KEYED AXLE features a product design enhancement to the 12mm Hex Adapter and added support products for the utmost fit within the tight tolerances on Traxxas vehicles.
Made from High grade Carbon Steel and Hardened to perfection! Involute MIP Spline Technology for smoother telescoping action! Designed using Castle Creations Monster Mamba Brushless Systems for testing! Fits Stampede 4x4 VXL New KEYED AXLE features a product design enhancement to the 12mm Hex Adapter and added support products for the utmost fit within the tight tolerances on Traxxas vehicles.
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that a T-Maxx* or Revo can dish-out. The inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. These are simply the most advanced steel CV driveshafts available. *TRX 2.5R/3.3 models only.
This is the optional Stage 1 Aluminum Links Kit for the Axial Wraith. jxs 04/11/12 ir/jxs
Detail driven, feature frenzy, and performance-minded, these are PowerStroke Performance Scaler Shocks from Pro-Line.What s included:Pre-assembled PowerStroke Performance Scaler Shocks (2)Single stage spring (2)+5mm longer shock ends (2)
Traxxas machined-aluminum bulkheads increase the strength of the T-Maxx. They provide a super-strong foundation for the suspension and chassis and maximum protection against crash damage. They're CNC-machined from 6061-T6 aluminum and are anodized-brilliant-blue with machined edges for outstanding detail. *NOTE: Installation requires use of 4939X suspension pins. Do not use stock hinge pins to complete this installation.
Helion Dominus Aluminum Threaded Shock Set
Painted Hull Blue for the Helion Rivos boat
Painted Hull Red for the Helion Rivos boat
Helion Main Chassis: Dominus SC
This is the optional Low CG Chassis Conversion Kit for the Traxxas 1/10 scale Slash 4x4. jxs 02/22/13 ir/jxs
For the ultimate in bump and jump control, Traxxas Big Bore shocks are the perfect addition to your Traxxas machine. These fully assembled precision dampers use machined aluminum bodies for consistent action lap after punishing lap, with a hard-anodized finish for extra strength and a "factory works" look. Inside, Teflon -coated shock bores reduce friction to nearly zero for instant suspension response, and dual silicone X-ring seals provide a perfect seal and super-smooth performance. The shock shafts are also premium-quality, and feature a titanium-nitride coating that resists scuffing, extends wear and reduces friction. The progressive-rate springs provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts.Teflon is a trademark or registered trademark of E.I. DuPont de Nemours and Co. Corporation, Wilmington, Delaware.
Looking for more stability and traction? The Dirt Hawg s mounted on Titus 2.2 wheels give you just that. Stability is achieved by a wider stance on each side of the vehicle with the Titus wheels. To complete the package, Dirt Hawg s bring the element of control, agility and overall performance to your little E-REVO with Pro-Line proprietary all-terrain design and high performance M2 (Medium) rubber compound.Contains:1071-13 Dirt Hawg I Off-Road Tires Mounted on Titus Bead-Loc Wheels for 1:16 E-REVO (2 pcs)Titus Wheel Specs:Outer Diameter: 2.2" (56mm)Width: 1.4" (36mm)Weight*: 69.1g* With included bead-loc ring sleeve
This is the Warn 1/10 scale Wireless Remote/Receiver Winch Controller Set from RC4WD. COMMENTS: This Wireless Remote/Receiver is not waterproof. Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries. jxs 04/22/14 ir/jxs
Both E-Maxx and T-Maxx will benefit from the added strength and performance from these Traxxas steel constant-velocity center driveshafts. The innovative design yields superior durability and long-wearing, low-maintenance running that s ready for high-torque applications, nitro or electric. Both the front and rear U-joints are lubricated and sealed by a rubber boot to protect against the dirt and grime that cause wear. The ultra-performance look is enhanced by the nickel-plated steel shafts, blue silicone boots, and red-anodized aluminum rings that capture the U-joint pins. Because they are manufactured by Traxxas, you can count on a perfect fit; efficient, smooth running; Traxxas tough durability; and unmatched support. Part 4949R is designed for the T-Maxx 2.5R and T-Maxx 3.3 (models 4902 and 4909 with OptiDrive transmission).
Helion Dominus TR Main Chassis
Pit Spider-Man and Power Man against the evil Green Goblin to protect Mary Jane in a daring LEGO® Super Heroes Spider-Helicopter Rescue!
The Ares Spidex is the perfect micro-size quad for budget-minded customers looking for their first multi-rotor aircraft. The 6-axis control system in the Spidex helps provide the steady control you need while learning and because it comes with two different flight modes and three different rates, it’s a great quad for pilots of all skill levels.
GTR shocks, 7061X (Shocks, GTR hard anodized, Teflon-coated bodies, with TiN shafts (fully assembled) (4)). Teflon is a trademark or registered trademark of E.I. DuPont de Nemours and Co. Corporation, Wilmington, Delaware.
Aluminum Caster Block (C-Hubs), Blue Left/Right for the Slash 4x4.
This is the Short Course Racing Truck Body with Printed Graphics for the Traxxas 4x4 Slash and Slayer. COMMENTS: Clear overspray film on outside of body must be removed after painting. jxs 03/15/11 ir/jxs
Do you hate having to glue up your tires? What about when you have to replace the tires and have to throw out a perfectly good wheel? Well, don t worry; we have you covered with the Axial bead-lock series of wheel. All Axial wheels are made from super strong composite material and come in several high quality finishes so you can customize the look of your truck. The 17mm hex is fast becoming the standard for super strong durability and light weight performance. For those that don t want to step up to the 17mm just quite yet all the Axial wheels include an adapter set that allows you to fit them to current 14mm hex hubs. The 8 Spoke Oversize wheels will fit directly on to the Savage X, Tmaxx and Revo, and fit all Axial oversize tires as well as Pro-Line 40 series tires
Enhance the overall performance of your stock Slash and Slash 4X4 or your ProTrac Suspension Kit Slash with PowerStroke Shocks.