• Kits - Trucks & Truggys

  • Showing: 1 - 9 of 9
    Sort by:
    Product description
    Traxxas E-Maxx RTR 4WD Monster Truck w/2.4GHz TQi, Link Module & Two Batteries
    $439.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the Traxxas E-Maxx RTR Monster Truck, with an included Link Enabled 2.4GHz TQi Radio System, two 8.4V 7-Cell NiMH Batteries and DC Battery Charger. This kit comes equipped with Traxxas iD Connectors as standard equipment.

    • TQi 2.4GHz Transmitter and Receiver
    • Traxxas Power Cell Batteries Included!
    • Waterproof electronics
    • Waterproof servos & ESC
    • Single speed transmission (Two-Speed optional)
    • Revo-Spec sealed pivot ball suspension
    • Revo-Spec sealed differentials
    • Revo-Spec sealed outer and center driveshafts
    • Low-CG chassis design
    • Stronger chassis braces
    • Tough transmission skid plate
    • Scaleable battery compartments
    • Snap-lock battery hold downs
    • Dual-servo steering system
    • Integrated servo saver
    • Hex hardware throughout
    • 3.8" mirror chrome Twin-Spoke wheels
    • 3.8" Maxx chevron tires
    $439.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    The first-generation Ford Bronco was one-of-a-kind featuring a unique chassis engineered to boldly drive beyond the pavement. That same off-road spirit inspired this licensed 1/10-scale recreation of the 72 Bronco.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    The brainchild of the same visionaries behind the Mustang, the first generation Bronco featured a unique chassis engineered to drive boldly where the pavement ends. You ll find that same spirit of off-road adventure in this licensed, 1/10-scale recreation of the 72 Bronco. Its proven Ascender chassis features stamped-steel ladder frames, over 45 of steering travel and one of the most capable off-road suspensions available. Heavy Duty Suspension The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Front Bumper Front bumper features molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the bumper can be moved to accommodate most of them. Heavy Duty CV Front Shafts As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle more than most other trucks in this class. Licensed 1972 Ford Bronco Body The painted, polycarbonate body is modeled after one of the most popular early editions of the Ford Bronco ever built. Scale touches include an injection-molded grille with headlight details and authentic Ford badging. Sticky Compound Interco Super Swamper Tires The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle. Powerful Dynamite Crawler Motor The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush. Waterproof Electronics The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect. Spektrum DX2E 2.4GHz Radio System The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.

    • 3-Link Panhard Bar Front Suspension
    • 4-Link Rear Suspension
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Front Bumper
    • Dynamite brushed 35T crawler motor and waterproof ESC
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Licensed 1972 Ford Bronco Body
    • Licensed Interco 1.9 Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic Axle Housings
    • Single-Speed, Metal Gear Transmission
    • Spektrum DX2E 2.4GHz radio system with batteries
    • Spektrum metal gear steering servo
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    The first-generation Ford Bronco was one-of-a-kind featuring a unique chassis engineered to boldly drive beyond the pavement. That same off-road spirit inspired this licensed 1/10-scale recreation of the 72 Bronco.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    The brainchild of the same visionaries behind the Mustang, the first generation Bronco featured a unique chassis engineered to drive boldly where the pavement ends. You ll find that same spirit of off-road adventure in this licensed, 1/10-scale recreation of the 72 Bronco. Its proven Ascender chassis features stamped-steel ladder frames, over 45 of steering travel and one of the most capable off-road suspensions available. Heavy Duty Suspension The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Front Bumper Front bumper features molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the bumper can be moved to accommodate most of them. Heavy Duty CV Front Shafts As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle more than most other trucks in this class. Licensed 1972 Ford Bronco Body The painted, polycarbonate body is modeled after one of the most popular early editions of the Ford Bronco ever built. Scale touches include an injection-molded grille with headlight details and authentic Ford badging. Sticky Compound Interco Super Swamper Tires The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle. Powerful Dynamite Crawler Motor The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush. Waterproof Electronics The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect. Spektrum DX2E 2.4GHz Radio System The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.

    • 3-Link Panhard Bar Front Suspension
    • 4-Link Rear Suspension
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Front Bumper
    • Dynamite brushed 35T crawler motor and waterproof ESC
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Licensed 1972 Ford Bronco Body
    • Licensed Interco 1.9 Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic Axle Housings
    • Single-Speed, Metal Gear Transmission
    • Spektrum DX2E 2.4GHz radio system with batteries
    • Spektrum metal gear steering servo
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas  6804R  1/10 Slash 4x4 Platinum SC Racing Truck Kit
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the brushless electric powered, radio controlled, almost ready to run 1/10 scale Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck. The differences between this version and the 6804 are a new Low CG Chassis and GTR High Volume Shocks on the 6804R. Requires transmitter, receiver, batteries, charger and paint for the body. COMMENTS: The ball bearings in the Traxxas Slash 4x4 are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax; Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 jxs 12/28/12

    • Slash 4x4 Platinum with Low CG Chassis with Spur Gear: 45 tooth Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+MPH operation with extra battery
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Vaterra 1986 Chevrolet K-5 Blazer Ascender 1:10 4WD Kit
    $319.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    The Chevrolet K-5 Blazer is one of the most popular 4x4 vehicles off all time. This 1/10-scale kit gives you all the hardware necessary to build an RC version that looks and drives like the real thing. At the heart of its incredibly scale performance is the Vaterra Ascender chassis. This innovative platform features stamped-steel ladder frames with adjustable wheelbase, a metal gear transmission and one of the most capable off-road suspensions available. Stamped-Steel Ladder Frames with Adjustable Wheelbase Steel, C-channel frames form the backbone of the Ascender chassis and give you four wheelbase lengths to choose from: 12.36 in (314mm), 11.9 in (302mm), 11.4 in (290mm) and 10.95 in (278mm). Markings on the frames make wheelbase adjustments easy. Heavy Duty Suspension The chassis has been designed with a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed metal gear transmission is engineered to handle high-output power systems and brutal conditions. Those seeking a little more flexibility for different types of terrain can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Bumpers and Rock Slider Side Bars The front and rear bumpers feature molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the side bars and bumpers can be moved to accommodate most of them. Heavy Duty CV Front ShaftsAs with the rest of the drivetrain components, these have been designed to handle the demands of high-output power systems and rugged terrain. They also allow up to 45 degrees of steering angle more than many other trucks in this class. Licensed 1986 Chevrolet K-5 Blazer BodyThe clear, polycarbonate body is modeled after one of the most popular K-5 Blazers ever built. Scale touches include an injection-molded grille with headlight details and authentic Chevrolet badging. A set of detail stickers is also included. Licensed Interco Super Swamper TiresThe realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle.Please note: Clear body show painted for advertising purposes only.

    • 1.9 in, 8-Spoke Wheels
    • 3-Link Panhard Bar Front Suspension
    • 4-Length Adjustable Wheelbase
    • 4-Link Rear Suspension
    • Adjustable Rock Slider Side Bars
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Bumpers
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Heavy Duty Slipper Clutch
    • Licensed 1986 Chevrolet K-5 Blazer Body
    • Licensed Interco Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic, Low-Profile Axle Housings
    • Receiver Box
    • Single-Speed, Metal Gear Transmission
    $319.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    RC10SC5M Team Kit
    $309.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the Radio Controlled, Electric Powered, 1/10 scale Team Associated RC10SC5M Short Course Truck Kit. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 5x10x4mm Fr Uprights 2 DTXC1535 2 5x8mm Diff 1 DTXC1523 2 10x15x4mm Gearbox 1 DTXC1595 2 5x10x4mm Gearbox 1 DTXC1535 4 5x10x4mm Idler Gears 2 DTXC1535 4 5x10x4mm Rear Uprights 2 DTXC1535 jxs 05/28/15 ir/jxs

    • Body: Clear Pro-Line
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Hard anodized aluminum with centralized mass and mid-motor position, fits R.O.A.R.-approved 2S saddle packs and 2S short packs with optional foam inserts
    • Differential: Ball type, 14 carbide balls
    • Drive: Rear wheel
    • Front Suspension: Inline design, heavy duty steering and caster blocks, adjustable mount angle options, heavy duty ball cups and studs
    • Shocks: Oil-filled aluminum body Factory Team 12mm Big Bore with 0.12 (3mm) diameter shafts
    • Slipper Clutch: Factory Team VTS with high-resolution spring for finer adjustments
    • Steering: Full ball bearing system with horizontal ball studs for finer Ackerman adjustments, Ackerman describes the effect of the inner front wheel turning faster that the outer front wheels during turns
    • Transmission: Updated four-gear transmission with lighter aluminum top shaft, stronger gears, ball bearings,
    $309.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated  7038 1/10 SC10.2 Factory Team Kit
    $279.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    With the levels of competition continually increasing in the short course arena, the minds behind the doors of Area 51 knew they would have to push the limits of the SC10 to stay out in front. The SC10.2 Factory Team kit delivers the next level of short course performance that will continue to be proven a winner. Based on the 8-time R.O.A.R. National Champion RC10T4, the SC10.2 shares many of the same Factory Team optional parts that result in improved durability and faster lap times. Factory Team 12mm 'Big Bore' shocks, VTS slipper clutch and 'Gull Wing' front suspension are just a few of the SC10.2 features that make it stand above the rest of the pack!

    • Team Associated SC10.2 Factory Team
    $279.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated RC10 T5M kit
    $279.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the Radio Controlled, Electric Powered, 1/10 scale Team Associated RC10T5M Off-Road Competition Truck Kit. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 3x7mm Steering 2 DTXC1506 4 5x10mm Fr Uprights 2 DTXC1535 2 5x8mm Diff 1 DTXC1523 2 10x15mm Gearbox 1 DTXC1595 4 5x10mm Idler Gears 2 DTXC1535 2 10x15mm Rear Uprights 1 DTXC1595 2 6x13mm Rear Uprights 2 DTXC1573 jxs 01/06/15 ir/jxs

    • Ackermann, Ackermann refers to the effect of the inside wheel rotating faster than the outside wheel during turns
    • Body: ProLine T5M with clear body spoiler
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Aluminum -- (--mm) thick, chassis fits ROAR approved 2S saddle packs & 2S short packs using optional foam insert, mid motor position
    • Drive: Rear wheel
    • Front Suspension: Inline, with heavy-duty steering and caster blocks, insert system for easy caster and trailing arm adjustments, adjustable front kick-up of 25¦ and 30¦
    • Shocks: Factory Team V2 Big Bore 12mm threaded aluminum body, 3mm shafts and low friction O-rings
    • Steering: Full ball bearing with horizontal ball studs for finer
    • Transmission: Four gear, with lighter aluminum top shaft, stronger gears, and a 14 carbide ball differential for increased life and torque capacity
    $279.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated  7025 1/10 Factory Team RC10T2.4 Kit
    $279.99

    Since its release in 2003 the RC10T4 has remained at the top level of national competition having won eight R.O.A.R. National Championships. Along with this unprecedented achievement of winning more national titles than any truck in its class, comes countless hours spent of research and development to keep improving the T4. The RC10T4.2 kit now comes with the latest Factory Team high-performance option parts like the 12mm "Big Bore" threaded shocks, VTS slipper clutch, blue aluminum bellcrank set and 12mm wheel hexes, just to name a few. Also included in the T4.2 Factory Team kit is the Pro-Line Bulldog body. The T4.2 is a potent race truck and has everything it takes to get you to the top of the podium!

    • Associated RC10T4.2 Factory Team Kit