This is the electric powered, radio controlled, RTF (Ready to Fly) FlyZone DHC-2 Beaver Select Scale Airplane. jml 12.25.12 jxs 09/05/12 ir/jxs
This is the Radio Controlled, Electric Powered, Almost Ready to Fly Curtiss P-6E Hawk Biplane by Great Planes. COMMENTS: Following are the colors of Top Flite MonoKote used to cover this model and stock numbers for 6' rolls; Cub Yellow, TOPQ0220 Sapphire Blue, TOPQ0226 Olive Drab, TOPQ0210 Jet White, TOPQ204 True Red, TOPQ0227 Black, TOPQ0208 ajw 1/30/14 jxs 08/06/14 ir/jxs updt jxs 2/10/15
This is the Brushless Powered, Radio Controlled Rx-R Island Wings DHC-2 Beaver Bush Plane from Flyzone. This version includes motor, ESC and servos. jxs 08/19/14 ir/jxs
The T-28 Trojan was a piston-powered U.S. military trainer used in the 1950s through the early 1970s. The original Trojan had a frameless canopy and an impressive engine that gave it a top speed exceeding 280 mph. Now you can pilot an electric scale replica of this historical warbird. Equipped with an outrunner brushless motor, ParkZone s T-28 Trojan is a powerful, high performance aircraft. The Trojan is perfect for the experienced pilot who would rather spend his time flying a mighty scale replica airplane than building one. The T-28 Trojan's Plug-N-Play version allows for the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly just plug in your receiver and fly! You can fly the T-28 Trojan using any major brand of receiver and transmitter. Simply attach a propeller and plug in a receiver of four channels or more, and it s ready for action. Plug-N-Play convenience, outstanding flight performance and beautiful scale detail with the T-28 Trojan you get it all. All that's needed to complete:Radio, battery, charger, and receiver
The full-scale Cub Crafters Sport Cub is an inspired reinvention of the Piper Super Cub that is introducing a whole new generation of aviators to the wonder and excitement of back country flying. The ParkZone Sport Cub park flyer is a fantastic recreation of this aerial adventure machine that will open a new world of possibilities for RC pilots too. Constructed of durable, lightweight Z-Foam material, it shares many of the same aerodynamic features that give the full-scale version its light wing loading and superb short field abilities. Oversized tundra tires for flying off grass and other rough surfaces are included. Those in search of the ultimate RC bush flying experience have the option of adding floats and functional flaps. This Plug-N-Play version can be flight-ready in the time it takes to install a receiver and charge a battery.
The E-flite Slick 3D 480 ARF is an aerobatic masterpiece that s ideal for enjoying thrilling performance in a small field environment. It achieves the 3D vision in every detail from its striking UltraCote covering scheme to its laser-accurate balsa construction-all designed in a way that makes a popular power system optimal. The result is a level of style and maneuverability that s sure to inspire you to take your flying to a new level. Plus, it won t take long to get flying thanks to great features and proven accessory recommendations. The recommended E-flite power system was designed around the popular and economical 3S Li-Po battery pack in the 1800-2200mAh range. For the ultimate in agility and stability, install the Spektrum AR636 DSMX 6-channel receiver with AS3X technology-engineered to give you thrilling 3D performance that will keep you coming back for more! Ultra-Lightweight ConstructionThe Slick 3D 480 is extremely lightweight without the compromise of design strength. Accuracy and quality of the all-wood construction can be clearly seen through the transparent UltraCote Lite covering. The recommended Spektrum A3030 high-torque, digital sub-micro servos deliver precision that s a compliment to the crisp throttle response you ll get using the Park 480 motor. Optimized For AerobaticsThe Slick 3D 480 has a no-holds-barred approach to design and performance with 3D-size control surfaces that offer very positive control authority, even at low airspeeds. Brushless Power ReadyThe recommended E-flite Park 480 brushless motor delivers outstanding performance with an 1800-2200mAh, 3S 11.1V Li-Po battery. Easy Field AssemblyThe canopy includes a latch release mechanism that combined with a thumbscrew security system for the plug-in wings means that there are no tools needed to assemble the model at the field.
The E-flite UMX Carbon Cub SS is a feature-rich scale BNF model that offers an escape-from-the-ordinary performance. Like the full-size Cub Crafters marvel, it's an immortal classic made more versatile than ever thanks to its high-output brushless power system and fully-functional flaps. Simply a joy to fly, you'll be able to leap from tight spots and cruise the landscape with confidence. Large credit for its gentle manners go to the onboard AS3X System that makes handling super smooth, even in moderate wind. Unlike anything offered in its class, you'll discover agility that's rock solid especially when diving in on that postage stamp called a runway. The UMX Carbon Cub SS is ready in just a few minutes. Just charge the included Li-Po battery and bind to your own full-range DSM2 /DSMX 4-channel transmitter, such as the Spektrum DX4e model. Go for a total bush-flying adventure and swap the stock landing gear for the optional E-flite custom float set (EFLUA1190), or expand your RC horizons with a friend and employ the top-mounted UMX sailplane tow hook.
The E-flite UMX Beast 3D aircraft is a totally new experience in all-out 3D flight capability and satisfaction from an amazing aircraft that doesn t need any more space than a small park, a yard or an indoor gym to be enjoyed. Enhanced with the AS3X System, the UMX Beast 3D plane is specifically set with an aft CG and large control surface deflections for maximum maneuverability. However, instead of handling that feels super sensitive, the UMX Beast 3D plane, with the AS3X System, flies ultra smooth, even in conditions considered windy. Plus, you get locked-in precision and the outstanding control authority necessary to perform 3D more confidently. Designed by aerobatic world champion Quique Somenzini, this authentic UMX re-creation of the full-scale Beast delivers precision aerobatic and 3D excitement with the kind of stability and authority more in common with aircraft many times its actual size. And you get all the benefits without having to spend a lot of time programming. No mixing is required just add your Li-Po battery, bind to a basic DSM2 /DSMX airplane transmitter setup, and the UMX Beast 3D plane will instantly offer you the best flight experience possible.
The Ares [air-eez] Gamma 370 Pro offers the stability and durability of the original Gamma 370 while also delivering full 4-channel control and an aerobatic capability experienced sport flyers will enjoy. The advanced EPO foam airframe design is not only lightweight, durable and easy to repair, it also arrives factory-assembled and nearly ready-to-fly right out of the box so you can be flying at a local park, schoolyard or flying field in almost no time at all.The Gamma 370 Pro is RFR (Ready-For-Receiver) and includes a factory-installed 370 brushless motor, 18-amp brushless ESC and three 9-gram sub-micro servos. It's ready for you to install a 4 (or more) channel receiver compatible with your favorite transmitter and includes two propeller options for use with 2S 7.4V or 3S 11.1V 800-1300mAh Li-Po batteries. Best of all it's available at a price that offers unbelievable value and makes it hard for almost any pilot to resist!The factory-installed brushless power system is quiet, efficient and powerful, delivering great performance and long flight times with 2S 7.4V and unlimited vertical performance with 3S 11.1V Li-Po batteries. Coupled to smooth and precise aileron, elevator and rudder controls the Gamma 370 Pro is capable of all basic and even advanced 4-channel aerobatics including point rolls, rolling circles, knife-edge and more!So whether you're looking for a great 'first' 4-channel model or a durable and fully aerobatic park flyer, there's no better choice and no better value than the Gamma 370 Pro!Specifications:Wingspan (mm):940Length (mm):775Weight (g)455
Like the original Vapor, the Night Vapor is slow enough and light enough to fly in a living room, a basement, or even the conference room at work. To this amazing slow flight performance it adds the fun of LED lights that allow you to fly in the dark. It also features a new modular design that makes replacement of broken parts quicker and easier. Best of all, you can have the Night Vapor BNF flying in as little time as it takes you to charge its battery and bind it to a DSM2 aircraft transmitter (sold separately).
This exciting Ultra Micro Series edition of ParkZone s wildly popular T-28 Trojan is a must have for any intermediate to experienced pilot. Like the original, it has plenty of performance for sport aerobatics but remains a joy to y at slower speeds if you want to throttle back and shoot touch and gos. And, like the original, it boasts remarkably scale lines and a great looking U.S. Navy trim scheme. Best of all, this one is small enough to y in your backyard. Also available in a Ready-To-Fly version.
The E-flite Clipped Wing J-3 Cub 250 airplane is the perfect little scale aerobat. Charming, classic and iconic are just a few of the characteristics for which the J-3 Cub is renowned. With its wings clipped and just a few more horses inside the cowling, you get all freedom the J-3 promises, plus the thrill of a more spirited flying experience. E-flite respectfully captures the Clipped Wing variant with a lightweight, all-wood structure in a way that authentically preserves the distinctive outline with a fun-to-fly model that s ideal for park environments. Even more satisfying is the short amount of time you ll need to get this charmer flight-ready, thanks to great features like the painted cowling with engine detail, streamlined wheel pants, finished wire landing gear, factory-installed tail surfaces and completely hinged control surfaces. Following the recommended E-flite accessories and Spektrum radio gear list can help your build go even more smoothly. The suggested 2S 7.4V Li-Po battery and E-flite Park 250 motor combination delivers the ideal power setup for great performance at a high efficiency level. For highest level of stability and agility possible, choose the new Spektrum AR6335 nanolite receiver with AS3X technology and enjoy the convenience of a park flyer that flies more like an expertly tuned airplane that s many more times the size. Ultra-Lightweight ConstructionAll-wood construction adds a sense of tradition and ease of repair while modern engineering offers light weight, rigidity and torsional stiffness. UltraCote ParkLite covering enhances the authentic scale appearance in addition to unmatched durability. Scale Detail with BenefitsThe Clipped Wing J-3 Cub 250 has an authentic scale outline with only slight deviations taken where performance and handling could be improved. The exposed cylinder heads are replicated to allow better component cooling with cleverly designed air intakes on the front of the dummy cylinders. Great Looks and Fast AssemblyThe wings add authenticity and permanently attach to the fuselage using scale wing struts to enhance the rigid, lightweight structure. The landing gear is made of steel music wire that has been covered in a very similar method to the full-scale. The factory installed tail surfaces and pre-hinged control surfaces reduce work-bench time significantly. Dual Aileron ServosDual aileron servos offer a more solid control feel and can deliver more power to the control surface. Fast and precise, the E-flite DS35 digital servo is a tiny, lightweight servo with great holding power. Because the airplane is designed around them, installation is quick and easy.
The Ares™ [air-eez] Gamma 370 offers stability and durability perfect for first-time pilots while also delivering smooth and capable flight performance experienced sport flyers will enjoy. The advanced EPO foam airframe design is not only lightweight, durable and easy to repair, it also arrives factory-assembled and nearly ready-to-fly right out of the box so you can be flying at a local park, schoolyard or flying field in almost no time at all.
Also, unlike other similar class models that require significant modifications and expense to upgrade to brushless power systems or aileron control, the Gamma 370 is designed so it’s ready for both. The very affordable Brushless Power System Upgrade Combo includes a brushless ESC plus a powerful 370 brushless motor and mount that install easily in minutes. And for full 4-channel control and aerobatic capability the optional aileron-equipped wing set can be mounted in place of the standard wing without the need for any modifications.
The Gamma 370 includes a factory-installed 370-motor equipped power system, ESC and 9-gram sub-micro servos. This RFR (Ready-For-Receiver) version is ready for you to install a receiver compatible with your favorite transmitter. From AA batteries for the 6-channel 2.4GHz transmitter and a 6- channel receiver to the 1000mAh 2S 7.4V LiPo battery, DC balancing charger and AC adapter there’s nothing extra to buy!
So whether you’re a first-time pilot looking for a great trainer or an experienced pilot looking for a fantastic sport flyer, there’s no better choice and no better value than the Gamma 370!