84mm Medium Length Big Bore Shock Spring (Yellow) (2) by Kyosho

Kyosho
KYOIS106-9514
$1.99 Flat Rate Shipping!
Low Price: $16.75
Add to Cart Add to Wish List
In Stock Online!
This item is eligible for $1.99 flat rate shipping Learn More

Store Availability Learn More

Frederick

Frederick, MD

Unavailable In Store

Check More Stores

This product was added to our catalog on April 1, 2011.

This is a set of optional Kyosho 84mm Big Bore Shock Springs, and are intended for use on the rear of the Kyosho MP9 and the front ST-RR 1/8 scale vehicles. These springs are made with a smaller 1.4 diameter wire, compared to the original big bore springs that used 1.6 wire. These springs also have a lower turn count than the older big bore shock springs, which allows the spring to be lighter than the previous shock springs.

Medium Length 84mm Shock Spring Specifications:

  • Softer
    • IS106-9514: Yellow - 9.5 turns/1.4 wire (2.95lb-in / 527.50 n/m)
    • IS106-914: Green -  9 turns/1.4 wire (3.16lb-in / 565.18 n/m)
    • IS106-8514: Orange  - 8.5 turns/1.4 wire (3.40lb-in / 608.65 n/m)
    • IS106-814: Light Blue - 8 turns/1.4 wire (3.68lb-in / 659.38 n/m)
    • IS106-7514: Gray - 7.5 turns/1.4 wire (4.02lb-in / 719.32 n/m)
    • IS106-1116: White - 11 turns/1.6 wire (4.11lb-in / 729.08 n/m)
    • IS106-1016: Purple - 10 turns/1.6 wire (4.62lb-in / 820.22 n/m)
    • IS106-916: Light Green - 9 turns/1.6 wire (5.28lb-in / 937.39 n/m)
    • IS106-816: Blue - 8 turns/1.6 wire (6.16lb-in / 1093.62 n/m)
  • Harder

Effects of Shock Spring Changes
 Shock Spring  Characteristic
 Softer
  • Increased Chassis Roll
  • Increased Traction
  • Better in Bumpy Conditions
  • More Likely to Bottom Out
 Stiffer
  • Decreased Chassis Roll
  • Decreased Traction
  • Increased Responsiveness