2204-32 Brushless Motor (90W, 1960kV) by Cobra
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This product was added to our catalog on April 23, 2014.This is the Cobra C-2204/32 Brushless Motor. Cobra Brushless Motors are built from high quality components, and offer performance and value for Sport Flyers and Competition pilots alike. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a cross mount built right into the back plate for easy installation on your model.
The O-Ring prop adapter is a reversible unit with a 5.5mm centering ring on one side to fit GWS Slow-Fly props, and a 7.0mm centering ring on the other side to fit GWS DD series props. With the proper center hole adapter ring, GWS Slow-Fly props and other brands will also fit perfectly on the prop adapter. Additionally, for this motor can be used for multirotor applications when combined with the optional Cobra 22mm C-2204 Bolt On Prop Adapter (COB-BPA-2204).
Stator Diameter: 22.0mm (0.866 in)
Stator Thickness: 4.0mm (0.157 in)
Number of Stator Slots: 12
Number of Magnet Poles: 14
Motor Wind: 32 Turn Delta
Motor Kv Value: 1960 RPM per Volt
No Load Current (Io): 0.58 Amps @ 8 Volts
Motor Resistance (Rm) per Phase: 0.153 Ohms
Motor Resistance (Rm) Phase to Phase: 0.102 Ohms
Maximum Continuous Current: 12 Amps
Max Continuous Power (2-cell Li-Po): 90 Watts
Max Continuous Power (3-cell Li-Po): 130 Watts
Motor Weight: 22.5 grams (0.79 oz.)
Outside Diameter: 27.0mm (1.063 in.)
Shaft Diameter: 3.00mm (0.118 in.)
Motor Body Length: 14.2mm (0.559 in.)
Overall Shaft Length: 21.8mm (0.858 in.)
Motor Timing: 5-10 degrees
PWM Frequency: 8 KHz
- (1) Cobra C-2204/32
- (4) M2x8mm Motor Mount Screws
- O-ring prop adapter with 2 screws