2017 GT200S Stretch Racing Drone (Titanium) by Diatone
This product was added to our catalog on August 4, 2017.
The Diatone 2017 GT200S Stretch Racing Drone is the third generation of the GT series. Continuing with a minimalist design and reducing the level of components, the GT200N allows simplified parts installation and replacement. With 8 modified details and 1 important design improvement.
Fury F3 Flight Control
The 2017GT features a joint designed F3 flight conroller. Using a MPU6000 six axis gyro and 8K/8K settings, integrated 5V/1.5A BEC, OSD and 3.3V/500mA independent power supply IC (AMS1117-3.3) for the receiver, you can use 3.3V or 5V on the control pad or use the extra provided 3.3V BEC module.
30A ESC supports Dshot300/600 with a matching EDGE custom 2306 silver motor to provide a powerful driving force. The 2306 includes silver enameled wire to improve efficiency and reduce heat.
Flash 5112 Gemfan Propeller
the 5112 was designed to provide the ideal airfoil to match the motor. Pop surface pressure, speed rate, airfoil curve, thickness and more were analyzed and optimised to match the 2205-2206 type motor. These slight but effective improvements provide great performance results.
The HS117 camera and SP2 V2 transmitter are a great match. The Sony Super 2 CCD provides a great image while the 2.3mm lens allows almost 120 degree angle of view. the SP2 V2 VTX provides 48 channels and 0/25/200/400mW power selection.
Motor Vibration Supression System
The separated structure design suspends the motor and provides complete isolation between teh motor and the frame. This provides an effective reduction of vibration transmitted to the frame and increases flight controller precision.
Uses a wider anti slip battery strap to add 50% more strength.
Sunnysky ESC Specifications:
Input Voltage: 3-4S Lipo
Continuous Current: 30A
Burst Current: 40A (10s)
MCU: Silabs EFM8BB21