Navigation

  • Thunder Power Batteries 40-Amp Smart Guide, Switch-Mode BEC Brushless ESC

    Product Number THPE40SGB4
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    Thunder Power Smart Guide series ESCs are perfect for use in a wide variety of applications, from park flyer and mid-size airplanes to micro and mini helicopter...*More

    Thunder Power Smart Guide series ESCs are perfect for use in a wide variety of applications, from park flyer and mid-size airplanes to micro and mini helicopters, and feature multiple programmable settings that allow you to optimize performance in each application, for any motor or battery type. These settings can be programmed using your transmitter, or the unique, easy and quick to use eZ programmer (THPEZP): Battery type; Ni-Cd/Ni-MH or Li-Po Cutoff type; Soft or Hard Cutoff voltage; Low (2.75V), Medium (3.0V) or High (3.25V) Governor mode for helis; On or Off Start up mode; Normal, Soft or Very Soft Timing mode; Low (0 degree), Middle (15 degree) or High (25 degree) Brake; Off, Soft or Hard Most models feature dual BEC regulators for consistent and reliable receiver/servo power when using up to 3S 11.1V Li-Po batteries and 4 sub-micro servos, and the 40-amp model features a switch-mode BEC that can power 5 sub-micro servos (or 4 micro servos) when using up to 4S 14.8V Li-Po batteries. However, the most unique feature of Smart Guide ESCs is that they re equipped with an industry-first balance connector lead that allows you to plug any Thunder Power (or similar compatible) balance connector into the lead for individual cell voltage monitoring during use. Balance Discharge Monitoring and Protection helps to prevent overdischarge of a single cell within the battery that can occur when only monitoring the voltage of the entire battery pack with other ESCs. This not only improves battery cycle life, but also prevents a potentially damaging and dangerous cell failure or imbalance. The motor leads of each ESC are equipped with factory-installed 3.5mm gold bullet connectors, and the throttle channel lead features a universal connector compatible with most major brand receivers. Just add your favorite battery lead connector, connect and fly!*Less

    Rating:
    Print This Page
    • Balance Discharge Monitoring and Protection to monitor individual cell voltage and prevent single cell overdischarge during use via the Thunder Power (and similar) compatible balance connector and lead
    • 2-4S Li-Po and 5-15 cell Ni-Cd/Ni-MH compatible
    • 5.8-volt switch-mode BEC offers power for up to 5 sub-micro servos or 4 micro servos
    • Factory-installed 3.5mm gold bullet motor connectors and universal throttle lead connector
    • For use with brushless inrunner and outrunner motors
    • Many user programmable settings, programmable using a transmitter or the unique, easy and quick to use eZ programmer (THPEZP)
    • Perfect for use in a wide variety of applications, from park flyer and mid-size airplanes to micro and mini helicopters
    • The perfect ESC upgrade for 400-450 class mini helicopters when added current handling and BEC handling (for 4 digital servos and gyro) capabilities are required
    • Up to 40-amps continuous current with proper air flow, and 55-amps in short bursts (10 seconds max)
    • ~Coming Soon
    • ~LiPo Battery Bag
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of