Navigation

  • Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor

    By Hobbico |
    Product Number HCAP0332
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This is the VoltWatch2 on-board Receiver Battery Monitor for 4.8V and 6V NiCd and NiMH receiver packs. This mounts on the outside of the airplane, so you can se...*More

    This is the VoltWatch2 on-board Receiver Battery Monitor for 4.8V and 6V NiCd and NiMH receiver packs. This mounts on the outside of the airplane, so you can see at a glance the status of the receiver battery mounted inside. COMMENTS: This has a Futaba J connector pre-installed. For radios other than Futaba, you will have to change or modify the plug. Because of reverse polarity, if you would like to use this with the older Airtronics batteries, you must also purchase AIRM4400 kpm12/15/2004 ir/jxs*Less

    Rating:
    Print This Page
    • 7-LEDs provide instant, accurate battery voltage status of Low, Safe, or Max.
    • Draws amazingly low current - from 4-34mA depending on the battery voltage
    • Only one LED glows at a time
    • Plugs into any open receiver channel using a Futaba J connector
    • Small switch to select 4.8V or 6V battery
    • Very lightweight, only .15oz (4.3g) unit can mount on the side of the fuselage, or under the plane's canopy
    • Current Draw:approx 4-34mA
    • Height:.16 (4mm)
    • Lead Length:198mm (7.79)
    • Length:1.65 (42mm)
    • Weight:.15oz (4.3 grams)
    • Width:.63 (16mm)
    • ~Coming Soon
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of