Navigation

  • Great Planes Manufacturing Polycharge 4 DC Only 4 Output Lipo Charger

    Product Number GPMM3015
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This is the Great Planes ElectriFly Four Output DC Powered Battery Charger for Lithium Polymer Batteries only. The instructions for the ElectriFly PolyCharge4 c...*More

    This is the Great Planes ElectriFly Four Output DC Powered Battery Charger for Lithium Polymer Batteries only. The instructions for the ElectriFly PolyCharge4 charger state the built-in fan turns ON when a load is present on any of the four outputs. This is incorrect. The fan turns ON any time input power is applied to the charger. We regret this error. **Do not use this charger with NiCd, NiMH or Lithium Ion batteries,** **They are not compatible.** **Damage from misuse or modification of this charger voids the warranty.** Output Specifications: Battery Type: 1-4 (3.7-14.8V) Lithium Polymer cells only Charge Control: Push-button Charge Termination: Constant Current/Constant Voltage Battery Capacity Range: 300-3000mAh (for batteries larger than 3000mAh, full Charge time will exceed one hour) Fast Charge Current: 300mA-3.0A Status Indicators: Tri-colored LED and audible buzzer Charge Output Jacks: Banana jacks Safety Timer: 3-hour maximum Charge time Fuse: 20A replaceable auto type spade fuse COMMENTS: The maximum voltage LiPo cells can receive during Charge is roughly 4.20V. It is not uncommon that after Charging LiPo battery packs containing multiple cells for the voltage to be slightly less than 4.20V per cell. This is normal. Cells which repeatedly measure under 4.10V after being Charged may require further evaluation. Cells which repeatedly measure under 4.00V after being Charged may require replacement. jxs 4/18/05 ir/jxs updt tjt 5-25-05 updt jxs 7/11/05 Updated JBM 1-10-06 updt jxs 8/05/06*Less

    Rating:
    Print This Page
    • Audio and tri-color LEDs provide warnings for improper input voltage and output reverse polarity
    • Automatically detects number of cells on each output-no switch to set
    • Built-in cooling fan
    • Constant Current/Constant Voltage Charge method
    • Each output features push-button START/STOP control, three-hour safety timer and dial to set battery capacity from 300mAh-3000mAh
    • Four outputs independently Charge 1-4 cell Lithium Polymer batteries
    • Reverse polarity and current overload protection on input
    • Case Size:8.2 x 1.5 x 5 (208x38x126mm)
    • Input Connectors:Alligator clips, hard-wired directly to charger
    • Input Voltage:12-15V DC
    • Number of Outputs:4
    • Weight:21.8oz (617g)
    • ~Coming Soon
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of