• E-Flite Beast 60e ARF

    By E-Flite |
    Product Number EFL9000

    y Please allow 5-7 days for free in store pick up. Delivery is not available on this item.
    1/10 Desert Truck Rtr
    qty $0.00

    The E-flite Beast 60e ARF biplane embodies everything you'd expect from a design created to deliver stunning feats of aerobatic artistry. The full-scale Beast ...*More

    The E-flite Beast 60e ARF biplane embodies everything you'd expect from a design created to deliver stunning feats of aerobatic artistry. The full-scale Beast is the brainchild of renowned aircraft restoration expert, Kevin Kimball, who actually collaborated with 3D champ Quique Somenzini on its design. Its dramatic ability to flip, roll and tumble with formidable precision inspired the 100cc Hangar 9 Beast that's widely recognized as a modern classic. For this inaugural 60-sized iteration, the E-flite development team worked closely with Quique to ensure the impressive performance and feel of a larger aircraft came through. Because it's been designed specifically with the modern electric pilot in mind, every design element takes full advantage of what potent electric power has to offer including engineered construction that's feather-light. As a result, the Beast 60e is a whole new breed of animal.Assembly at the field takes just a few minutes and is as simple as installing four screws and four pins. Flight battery replacement is fast too from the magnetic slide-lick top hatch that provides instant access to vital electronics. The recommended E-flite power system was designed around popular and economical 6S Li-Po batteries to provide power you can trust and unlimited performance. So inspired by the agility and presence of the Beast 60e, E-flite engineers developed an even stronger version of the Power 60 brushless motor so that its fierce aerobatic ability could shine through.*Less

    Print This Page
    • Durable aluminum landing gear with painted finish
    • Fast four-screw and four-pin field assembly
    • Genuine Hangar 9 UltraCote covering
    • High power-to-weight ratio with 3D capability
    • Independent and simple direct-link servo installation
    • Large control surfaces with double-beveled hinge lines
    • Large magnetic nose hatch provides ample access to battery and electronics
    • Lightweight laser-cut balsa and plywood construction
    • Pre-painted fiberglass cowling and wheel pants
    • Ready-to-mount the recommended high-output E-flite Power 60, 470Kv motor
    • Steerable tailwheel and quality hardware package
    • Two-piece, plug-in wings with carbon joiner tube
    • Assembly Time7-9 Hours
    • CG (center of gravity)4-1/2 to 4-15/16 in (115-125mm) back from the center of top wing
    • Control Throw (Ailerons)Low: 1-3/4 in (45mm) up/down, 10% expo; High: 2-15/16 in (75mm) up/down, 30% expo
    • Control Throw (Elevator)Low: 2-15/16 in (75mm) up/down, 10% expo; High: 5-1/8 in (130mm) up/down, 30% expo
    • Control Throw (Rudder)Low: 3-3/4 in (95mm) right/left, 10% expo; High: 4-1/2 in (115mm) right/left, 30% expo
    • Experience LevelIntermediate
    • FlapsNo
    • Flying Weight8.90-9.55 lb (4.05-4.35 kg)
    • Is Assembly RequiredYes
    • Minimum Age Recommendation14 years
    • Motor Size60-size brushless outrunner
    • Overall Length57.5 in (146 cm)
    • Prop Size17 x 7e
    • Radio6+ channel radio system
    • Recommended Battery22.2V 6S 4400-5000mAh LiPo
    • Recommended EnvironmentOutdoor
    • RetractsNo
    • Servos(2) ultra torque standard, (4) ultra torque mini servos
    • Speed Control80-amp brushless
    • Spinner Size3.0 inch P-51 style
    • Trim Scheme ColorsUltraCote Black (U874), True Red (U866), Gold (U879)
    • Wing Area1100 sq. in. (71.0 sq. dm.)
    • Wingspan57.0 in (145 cm)
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    HobbyTown locations within miles of