Navigation

  • E-Flite 10-amp Pro Brushless ESC

    By E-Flite |
    Product Number EFLA1010
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2 3 cell Li-Po battery packs ...*More

    This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2 3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range. *Less

    Rating:
    Print This Page
    • Auto motor shut down if signal is lost or there is interference
    • Pre-wired connectors JST on battery input and 2mm female gold bullets on motor output leads
    • Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
    • Programmable motor braking
    • Programmable throttle input range (1.1ms 1.9ms or Auto Select)
    • Programmable timing 2 user-selectable ranges for use with a large variety of brushless motors
    • Safe power-arm mode prevents accidental starts
    • Soft start
    • Up to 10-amp continuous current with proper air flow
    • BrakeYes - Programmable
    • Cells w/BEC2 3S Li-Po or 6 10 Ni-MH/Ni-Cd
    • Continuous Maximum Current10A
    • Height0.4 in (10mm)
    • Input Connector Types20AWG with JST connector
    • Length1.2 in (30mm)
    • Momentary Peak Current12A (15 sec)
    • Output Connector Types20AWG with 2mm Female Gold Bullet Connectors
    • Weight0.35 oz (10 g)
    • Width0.7 in (17.5mm)
    • ~Coming Soon
    • ~LiPo Battery Bag
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of