Use RCL5006 to install 4 white dual headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with include...More

Use RCL5006 to install 4 white dual headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with included microBRAKE - 6 LED controller. This controller has EBS functionality built right in for a streamlined installation on the most common setup for R/C cars trucks. Powered directly from the RX throttle channel using the included RX Pass-Thru . To change headlight or tail light colors use 5mm or 3mm LEDs. Everything needed for a complete installation is included with every lighting system! NOTE: microBRAKE 6 LED Controller is not compatible with the Remote Power Switch (RCL5090).INCLUDES:Instruction Set - (1) microBRAKE 6 LED controller RCL5052 (1) RX Pass-Thru w/ 3P power plug RCL5074 (6) 14" wire extensions RCL539014 (4) 5mm white headlights RCL5290W (2) 5mm red tail lights RCL5290R (6) standard 5mm LED holders RCL5082(6) 2P connector housings - (1) 3.75"x3" aluminum tape RCL5080 (6) zip ties bases Specs:SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright(A standard servo draws approx. 350mA)LED ControllerINPUT VOLTAGE: 3.6-7.4V [6V Optimal]TYP OUTPUT CURRENT (per LED channel): 20-30mADIMENSIONS: 1.3" x 0.6" x 0.3"Blue, Green, White, White Strobe, Red Strobe LEDsFORWARD VOLTAGE: 3.2VMAX CURRENT: 30mAAmber, Red LEDsFORWARD VOLTAGE: 1.9VMAX CURRENT: 30mALess