Navigation

  • DL Power Cc 4-Cylinder Gas Engine w/Electric Ignition & Mount

    By DL Power |
    Product Number DLEDLE222
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    qty $0.00

    This is the DLE 222cc Gasoline Powered Engine with Electronic Ignition. COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER turn your D...*More

    This is the DLE 222cc Gasoline Powered Engine with Electronic Ignition. COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER turn your DLE engine over with the system switched on and the plug not installed. jxs 05/06/10 ir/jxs updt 10/07/10*Less

    Rating:
    Print This Page
    • Double V-type reed valve bottom induction
    • Dual carburetors for maximimum performance
    • Fully automatic electronic ignition
    • Six bolt prop hub
    • Bore:1.77 (45mm)
    • Compression Ratio:
    • Cylinder Head Exhaust Outlet Height:0.51 (13mm)
    • Cylinder Head Exhaust Outlet Width:1.1 (27mm)
    • Displacement:13.6 cu in (222.5cc)
    • Distance between Muffler Mounting Hole Centers:1.6 (40.5mm)
    • Distance between Vertical Mounting Hole Centers:3.6 (91mm)
    • Engine Weight:10.9lbs (174.6oz) (4950g)
    • Exhaust Pipe Diameter:1.2 (31mm)
    • Exhaust Pipe Length:6 (152mm)
    • Gasoline Octane Rating:87-93
    • Gasoline/Oil Mixture:
    • Height from Crankcase to top of Carburetors:6.2 (157mm)
    • Height of Entire Mounting Plate:4.2 (107mm)
    • High Speed Needle:1.5 turns from closed
    • Idle Speed:1000 RPM
    • Length from Mounting Plate to Front Bearing:8.97 (228mm)
    • Length from Mounting Plate to Prop Hub:10.1 (258mm)
    • Low Speed Needle:1.5 turns from closed
    • Muffler Can Diameter:2 (50mm)
    • Muffler Can Length:8.4 (214mm)
    • Muffler Outlet Diameter:1.2 (30mm)
    • Output Power:21.5 HP at 7, 500 RPM
    • Recommended Propellers:26x12, 28x10
    • RPM Range:1, 000 - 7, 500
    • Spark Plugs:NGK CM6 (DLEG5626) or equivalent
    • Stroke:1.38 (35mm)
    • Total Width Including Both Cylinder Heads:10.1 (258mm) not
    • Widtht of Entire Mounting Plate:3.8 (96mm)
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown locations within miles of