This is your no-solder LED lighting solution for RPM Light Canisters RPM Tail Lights! Use RCL112 to add 10 3mm white LED lights to RPM Front Bumper Canisters ...More

This is your no-solder LED lighting solution for RPM Light Canisters RPM Tail Lights! Use RCL112 to add 10 3mm white LED lights to RPM Front Bumper Canisters or RPM Narrow Roof Canisters and RPM Roof Canisters, and 2 3mm red LED lights to RPM Tail Light Canisters. EBS switch is included for dual-intensity brake light action, just like a real car. Compatible with RPM Light Canister Set RPM80982 RPM80983 --Direct fit for Slash 4x4, Slash SC10 RPM Front Bumpers Compatible with RPM Narrow Roof-Mounted Light Bar Set RPM80782 RPM80783 Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 RPM80925 --Direct fit for Slash 4x4, Slash SC10 Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash SC10 Power directly from the RX COMBO: RCL104 + RCL106A + RCL5422E To change LED sizes or colors use 5mm or 3mm LEDs. Everything needed for a complete installation is included with every lighting system!Includes:Instruction Set - (1) standard 10 LED controller RCL5051 (1) RX Direct2LED RCL5075 (1) electronic brake switch RCL5092 (1) RX plug RCL5073 (4) 4" wire extensions RCL53904 (8) 14" wire extensions RCL539014 (10) 3mm white LEDs RCL5280W(2) 3mm red LEDs RCL5280R (12) 2P connector housings (1) 3.75"x3" aluminum tape RCL5080 (6) zip ties (2) bases Specs:SYSTEM CURRENT DRAW (@6V): 240mA (A standard servo draws approx. 350mA) LED Controller RX Direct2LED INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA Electronic Brake Switch INPUT VOLTAGE: 4.8-6.0V MAX OUTPUT CURRENT: 1.2A Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output. *DO NOT look directly into beam.Less