Navigation

  • 1/10 RAIDER RTR 2.4GHZ W/BATTERY/CHARGER

    By ARRMA |
    Product Number ARAAD01
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of
    qty $0.00

    This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run Raider Baja Buggy with Painted Body from Arrma. COMMENTS: Available with the foll...*More

    This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run Raider Baja Buggy with Painted Body from Arrma. COMMENTS: Available with the following body colors; Green, ARAD01GG Red, ARAD01RR Yellow, ARAD01YY If wanting to upgrade to a brushless motor, the Duratrax Element 3900kV Brushless Power System (DTXC3122) is a ideal choice. The ESC fit is tight but can be achieved with patience. The stock 81 tooth 48 pitch spur gear can be used. A 48 pitch 25T pinion gear (RRPC1025) is recommended. For replacement or to upgrade to ball bearings use: Qty. Size Location Qty. Bearing Set 4 5x10mm Fr Wheels 2 DTXC1535 4 5x13mm Rear Wheels 2 ARAC3201 2 10x15mm Diff Gear 1 DTXC1595 4 5x10mm Gearbox 2 DTXC1535 jxs 09/24/12 ir/jxs*Less

    Rating:
    Print This Page
    Key FeaturesFull Specs Comments/Reviews
    • Battery Charger: AC wall type
    • Battery: 1500mAh 6-Cell NiMH stick pack with standard connector
    • Body: Trimmed and painted Warp polycarbonate Baja buggy with black plastic rear wing
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Aluminum 0.08 (2mm) thick matural finish with double chassis rails and alloy front chassis plate, batteries fit under chassis-no need to remove body to change batteries
    • Differential: Metal planetary gear, oil filled
    • Drive: Rear wheel with steel driveshafts and axles
    • Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
    • Front, 1.1 (29mm) wide, 2.2 (56mm) diameter
    • Front, 1.2 (30mm) wide, 3.3 (85mm) diameter
    • Motor: 15 turn brushed
    • Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver, transmitter can be converted for left or right hand use, seven position adjustable steering wheel, digital trim, servo reverse, end-point adjustment and failsafe
    • Rear, 1.6 (40.5mm) wide, 3.3 (85mm) diameter
    • Rear, 1.6 (41mm) wide, 2.2 (56mm) diameter
    • Receiver Box: Splash and dust proof
    • Shocks: Composite body, oil-filled
    • Slipper Clutch: Machined alloy gears, adjustable for different track conditions
    • Steering: Bellcrank type with composite servo saver
    • Suspension: Fully independent
    • Tires: dBoots Dunerunner with dBoots foam inserts
    • Transmission: Metal gear, brushless ready
    • Wheels: Six spoke chrome, 12mm hex
    • Height:3 (76.2mm)
    • Height:5.5 (140mm)
    • Length:10.1 (257mm)
    • Length:15.7 (400mm)
    • Ride Height:1.2 (30mm)
    • Weight:3lbs (1360g) without battery
    • Wheelbase:11.4 (290mm)
    • Width:4.5 (114mm) at widest point
    • Width:9.9 (252mm)
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of