Navigation

  • * Team Associated 80906 Factory Team RC8.2 Kit

    By Associated Electronics |
    Product Number ASC80906
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of
    qty $0.00

    This is the 1/8 scale radio controlled, glow powered RC8.2 Factory Team Buggy Kit from Team Associated. COMMENTS: For Replacement Ball Bearings use: Qty. Size ...*More

    This is the 1/8 scale radio controlled, glow powered RC8.2 Factory Team Buggy Kit from Team Associated. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x16mm Front & Rear Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 4 8x16mm Front Hubs 2 DTXC1585 4 8x16mm Rear Hubs 2 DTXC1585 4 6x10mm Steering 2 DTXC1561 2 8x16mm Front Bulkhead 1 DTXC1585 2 8x16mm Rear Bulkhead 1 DTXC1585 4 15x21mm Front Suspension 2 ASCC6862 4 15x21mm Rear Suspension 2 ASCC6862 2 8x16mm Rear gearbox 1 DTXC1585 2 5x10mm Clutch 1 DTXC1535 jxs 10/28/11 ir/jxs*Less

    Rating:
    Print This Page
    Key FeaturesFull SpecsNeeded to Complete Comments/Reviews
    • Air Filter: Low profile elliptical high-flow two stage
    • Body: JConcepts Punisher body with Illuzion wing, low CG wing mount
    • Caster: Adjustable 14¦, 16¦, or 18¦ with molded inserts, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Factory Team 7075 hard anodized aluminum 0.12 (3mm) thick with one-piece top plate and molded composite front and rear braces
    • Clutch: Machined aluminum racing type, 16 tooth clutch bell
    • Drive: Four wheel shaft drive with CVA boots on center and rear drive joints, Factory Team 7075 aluminum axles and center drives
    • Fuel Tank: Anti-foaming, easily removed with two clips
    • Radio Tray: Molded composite with optional forward placement battery box for increased steering
    • Shock Towers: Factory Team 7075 aluminum, low center of gravity design with optimized geometry, 0.20 (5mm) thick
    • Shocks: Factory Team 16mm Big Bore oil-filled, hard anodized bodies and 4mm titanium nitride coated shafts, steel alloy standoffs
    • Steering: Bellcrank type with servo saver, Factory Team 7075 blue aluminum knuckles and steering posts
    • Suspension: Newly designed arms with centerline shock mounts and optimized anti-roll bar suspension, Factory Team 7075 blue aluminum lower suspension mounts
    • Wheels: Factory Team 3.3 (83mm) diameter dish wheels, white in color 1.7 (42.2mm) wide
    • Height:4 (102mm)
    • Internal Gear Ratio:
    • Length:12.8 (325mm)
    • Length:18.6 (473mm)
    • Weight:6.98 lbs (3167g)
    • Wheelbase:12.7 - 12.8 (323 - 326mm)
    • Width:8 (204mm) at widest point
    • Width:12 (305mm)
    • ~2 Channel radio w/2servos
    • ~receiver Battery: 4.8-7.4V flat or hump NIMH or 1600-2100 LiPo Pack
    • ~8 AA batteries for radio system so order 2 QTY (HTUP5106) AA 4-PACK
    • ~.21 rear exhaust engine
    • ~2 cycle glow fuel 10-15% nitro
    • ~1.2V glow starter
    • ~Starter box
    • ~Lexan paint - spray or brush on
    • ~(PHU3050) 250CC FUEL BOTTLE
    • ~1/8 scale buggy tires
    • ~Building and Field equipment
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of