Navigation

  • * Raptor 30 V2 Super Combo

    Product Number TTR4839F09M2A1
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    HobbyTown USA locations within miles of
    qty $0.00

    This is the glow powered, 2.4GHz radio controlled, almost ready to fly Thunder Tiger Raptor 30 V2 Helicopter Combo. This version includes an iFHSS 2.4GHz Radio ...*More

    This is the glow powered, 2.4GHz radio controlled, almost ready to fly Thunder Tiger Raptor 30 V2 Helicopter Combo. This version includes an iFHSS 2.4GHz Radio System and the PRO 39H (R) Engine. For RC Helicopter Pilots 14 Years of Age and Older. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing 1 8x16mm Drive Gear 1 DTXC1585 1 6x12mm Clutch Bell 1 DTXC1569 1 6x15mm Top Starter Shaft 1 ARZC2611 1 10x19mm Upper Main Shaft 1 HMXE7293 3 4x7mm Washout Assembly 2 DTXC1507 2 8x12mm Elevator Arm Control 1 DTXC1581 2 4x7mm Aileron Control Lever 1 DTXC1507 2 4x8mm Collective Pitch Collar 1 DTXC1511 4 4x7mm Mixing Lever 2 DTXC1507 2 3x8mm Flybar Assembly 1 Not Carried 1 5x11mm Tail Housing 1 DTXC1547 4 5x10mm Tail Rotor Hub 2 DTXC1535 2 6x10mm Tail Pitch Slider 1 DTXC1561 2 4x7mm Tail Pitch Control Lever 1 DTXC1507 jxs 12/15/11 ir/jxs*Less

    Rating:
    Print This Page
    • Body: White plastic with applied decals and tinted canopy (color of decals may vary)
    • Control System: 90¦ Collective Cyclic Pitch Mixing (CCPM) with solid 6mm spindle and 10mm main shaft
    • Engine: PRO 39H (R) with ringed piston, two needle carburetor,
    • Flight Battery: 4.8V 1600mAh NiMH
    • Gyro: Ace TG7000, heading lock
    • Landing Gear: Nylon with aluminum skids
    • Main Blades: Wooden, natural finish with clear protective coating
    • Radio: 2.4Ghz 6-channel programmable Sky Tech TS6i with digital rudder servo, four standard servos, system is trainer compatible with #AT1032 trainer cable (not included), Acro/Heli mixing, 8 model memory
    • Schnuerle porting, glow plug, two ball bearings, aluminum muffler with heatsink
    • Tail Boom: Aluminum with rigid support with plastic end
    • Tail Drive: Belt
    • Tail Rotor Blades: White plastic
    • Fully Equipped Weight:6.6lbs (3000g)
    • Fuselage Length:45.27 (1150mm)
    • Fuselage Width:5.51 (140mm)
    • Gear Ratio:.57
    • Main Rotor Diameter:49 (1245mm)
    • Tail Rotor Diameter:9.3 (236mm)
    • Total Height:15.75 (400mm)
    • ~Building and Field Equipment
    • ~6AA Batteries for transmitter
    • ~Glow fuel: Heli blend 15-30%
    • ~Starting shaft 6MM hex size
    • ~Electric starter 12V .90 size
    • ~Remote Glow starter
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of