Navigation

  • * Eratix 3D 25E ARF

    By E-Flite |
    Product Number EFL4075
    $0.00

    y Please allow 5-7 days for free in store pick up. Delivery is not available on this item.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    HobbyTown USA locations within miles of
    qty $0.00

    The E-flite Eratix 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demandi...*More

    The E-flite Eratix 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area and light wing loading offer very forgiving flight characteristics, especially in slow flight. It s also compatible with a range of motor and propeller sizes so you can fine tune the power and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate the uniquely designed, machined aluminum 3D control arms that can handle the rigors of high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, the Eratix 3D 25e is up for whatever you are.*Less

    Rating:
    Print This Page
    • Capable of sport-to-extreme 3D aerobatics
    • Easy-access magnetic battery hatch
    • Factory-painted fiberglass cowl
    • Firewall accepts E-flite Power 25 or Power 32 brushless motors without modification
    • Generous wing area and light wing loading for superb slow flight response
    • Ground clearance optimized for a wide range of prop sizes
    • Lightweight, open-structure airframe design
    • Specially designed, machined, 3D control horns
    • Steerable tail wheel
    • Top quality, laser-cut balsa and lightweight plywood materials
    • Tough, lightweight aluminum landing gear with factory-painted fiberglass wheel pants
    • CG (center of gravity)3.75 4 in (80 100mm) from leading edge
    • Control Throw (Ailerons)High Rate: 3 in (75mm) up and down; Low Rate: 1 in (25mm) up and down
    • Control Throw (Elevator)High Rate: 3.5 in (90mm) up and down; Low Rate: 1 in (25mm) up and down
    • Control Throw (Rudder)High Rate: 4.5 in (115mm) left and right; Low Rate: 2 in (50mm) left and right
    • Flying Weight3.75 4 lb (1.7 1.8 kg)
    • Hardware IncludedYes
    • Motor SizePower 25 or 32 required
    • Overall Length53 in (1350mm)
    • Prop Size13 x 6.5E, 14 x 7E, or 15 x 8E depending upon which recommended setup you choose
    • Radio6+ channels
    • Recommended Battery3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po
    • Servos4 metal-gear minis
    • Speed Control60A ESC (EFLA1060)
    • Spinner Size2.5"
    • Trim Scheme ColorsUltraCote Lite White (HANU973), Safety Orange (HANU892), Fluorescent Blue (HANU896), and Clear (HANU964)
    • Wing Area695 sq in (44.9 sq dm)
    • Wingspan54 in (1370mm)
    • ~DX7 CHANNEL TRANSMITTER ONLY (SPMR7800)
    • ~DSM2 7CH RECEIVER (SPM6070)
    • ~4 MINI SERVOS - DS3421 DIGITAL MG MINI SERVO (JRPSDS3421)
    • ~60-AMP PRO SWITCH-MODE BEC BRUSHLESS ESC (EFLA1060)
    • ~CELECTRA 1 TO 3CELL LI-PO CHARGER (EFLC3005)
    • ~4200MAH 3S2P 11.1V LI-PO 13GA BATTERY
    • ~Building and Field Equipment
    • ~POWER 25 BL OUTRUNNER MOTOR 870KV (EFLM4025A)
    • ~14X7E ELECTRIC PROP (APCLP14070E)
    • ~EC3 DEV & BATT, MALE/FEMALE (EFLAEC303)
    • ~2 QTY - 12" SERVO EXTENSION (JSP98030)
    • ~POWER METER (EFLA110)
    • ~HITEC 225MG (HRC32225S)
    • ~LiPo Battery Bag
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of