Navigation

  • * ElectriFly SU-31 E-Performance 3D EP ARF

    By Great Planes Manufacturing |
    Product Number GPMA1547
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of
    qty $0.00

    This is the electric powered, radio controlled, almost ready to fly ElectriFly SU-31 3D Aerobatic Airplane. Park Pilot Program Legal Aircraft This SU-31 3D is p...*More

    This is the electric powered, radio controlled, almost ready to fly ElectriFly SU-31 3D Aerobatic Airplane. Park Pilot Program Legal Aircraft This SU-31 3D is part of the ElectriFly E-Performance Series. Control Throws- Low Rate High Rate 3D Elevator: 3/8 (9.5mm) 7¦ 1/2 (12.7mm) 10¦ 2-1/4 (57mm) 48¦ Rudder: 1-1/4 (32mm) 16¦ 2 (51mm) 26¦ 3-1/4 (83mm) 45¦ Ailerons: 1/2 (12.7mm) 11¦ 3/4 (19.1mm) 14¦ 1-5/8 (41mm) 32¦ COMMENTS: Pilot figure shown in photos not included. Following are the Top Flite MonoKote colors used on this model and order numbers for six foot rolls; White TOPQ0204 Black TOPQ0208 Sapphire Blue TOPQ0226 Dove Gray TOPQ0211 Yellow TOPQ0203 jxs 12/16/08 ir/jxs*Less

    Rating:
    Print This Page
    Key FeaturesFull SpecsNeeded to Complete Comments/Reviews
    • Aileron Control: Dual servo
    • Building Time: Approximately 4-6 hours
    • Canopy: Clear, single
    • Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled
    • Covering: Top Flite MonoKote
    • Cowl: Prepainted fiberglass, attaches with rare earth magnets
    • Hardware: Full set included
    • Landing Gear: Prepainted aluminum 0.079 (2mm) thick
    • Motor Mount: Built-up plywood
    • Spinner: White plastic, 1.75 (44mm) diameter
    • Wheel Pants: Prepainted ABS
    • Wheels: Two foam 1.75 (44mm) diameter
    • Wings: Two piece with carbon fiber wing joiner, secures to fuselage with wing hooks and rubber bands inside fuselage
    • Airfoil:Fully symmetrical, mid wing placement
    • Center of Gravity:2-5/8 (67mm) back from the leading edge of the
    • Length:38 (965mm)
    • Weight:27.5 - 31 oz (780 - 880g)
    • Wing Area:343 sq in (22.1 sq dm)
    • Wing Loading:11.5 - 13 oz/sq ft (35 - 40 g/sq dm)
    • Wingspan:41 (1040mm)
    • ~4 CHANNEL COMPUTER RADIO SYSTEM RECOMMENDED
    • ~4 MICRO SERVOS
    • ~35A ESC FOR BRUSHLESS MOTORS
    • ~LIPO COMPATIBLE CHARGER
    • ~11.1V 1250-1500MAH LIPO BATTERY
    • ~ELECTRIFLY EQUINOX LI-PI CELL BALANCER 1-5 (GPMM3160)
    • ~RIMFIRE 35-30-1250 OUTRUNNER MOTOR
    • ~10X7E PROP
    • ~2 QTY 6" SLIM EXTENSION WIRE
    • ~2 QTY 12" SERVO EXTENSION
    • ~DUAL EXTENSION AILERON SERVOS
    • ~Building and Field Equipment
    • ~LiPo Battery Bag
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of