Navigation

  • * Eagle 580 Matt Chapman 580 .46-.81 EP ARF

    By Great Planes Manufacturing |
    Product Number GPMA1281
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of
    qty $0.00

    This is the radio controlled, glow or electric powered, almost ready to fly, .46-.81/EP Great Planes Matt Chapman Eagle 580 Sport Scale Airplane. COMMENTS: Foll...*More

    This is the radio controlled, glow or electric powered, almost ready to fly, .46-.81/EP Great Planes Matt Chapman Eagle 580 Sport Scale Airplane. COMMENTS: Following are the Top Flite MonoKote colors used to cover this model and order numbers for 6ft rolls; Cub Yellow TOPQ0220 Sapphire Blue TOPQ0226 Black TOPQ0208 If a replacement fuel tank is needed, order the Sullivan 16oz Flextank (SULQ1743), or the DuBro 16oz tank (DUBQ0216). Some minor trimming and modifications may be required. jxs 6/04/09 ir/jxs updt jxs 11/16/09*Less

    Rating:
    Print This Page
    Key FeaturesFull SpecsNeeded to Complete Comments/Reviews
    • Aeronautical Institute trim scheme
    • Aileron Control: Dual servo
    • Building Time: 4-6 hours
    • Cockpit: Pre installed and painted pilot figure
    • Construction: Built-up balsa and light plywood fuselage and tail assembly, oversize control surfaces to enable 3D maneuvers
    • Covering: Top Flite MonoKote with authentic Embry Riddle
    • Cowl: Painted fiberglass
    • Engine Mount: Two-piece composite
    • Fuel Tank: Approximately 16oz (480cc)
    • Landing Gear: Painted fiberglass
    • Rudder Control: Single servo, aft servo mounting position possible to reduce required tail weight when using a larger glow engine
    • Servo Compartment: Plywood reinforced, accessible under canopy, secures to fuselage with magnets
    • Spinner: Blue plastic 2.5 (64mm) diameter
    • Stabilizer: Two-piece with carbon fiber tube
    • Wheel Pants: Painted fiberglass
    • Wheels: Main, foam 2.75 (70mm) diameter, Tailwheel 1-1/4 (32mm)
    • Wings: Two-piece balsa sheeted foam with carbon fiber wing tube
    • Ailerons:1/4 (6mm) 4¦ 15/16 (24mm) 14¦ 1-3/4 (44mm) 26¦
    • Airfoil:Fully symmetrical, low wing placement
    • Center of Gravity:3-3/4 (95mm) back from the leading edge of the
    • Elevator:3/8 (10mm) 5¦ 11/16 (17mm) 10¦ 2-3/8 (60mm) 35¦
    • Length:57.5 (1460mm)
    • Rudder:1-3/4 (44mm) 16¦ 2-1/4 (57mm) 20¦ 3 (76mm) 28¦
    • Weight:6-7lb (2720-3180g)
    • Wing Area:645 sq in (41.6 sq dm)
    • Wing Loading:21-25 oz/sq ft (64-76 g/sq dm)
    • Wingspan:53 (1350mm)
    • ~LiPo Battery Bag
    • ~FOR GLOW OPERATION YOU WILL NEED:
    • ~.46 - .61 cu in (7.5-10cc) 2-stroke OR .52 - .81 cu in (8.5-13.5cc) 4-stroke engine
    • ~Propeller that is compatible with selected engine
    • ~FOR ELECTRIC OPERATION -
    • ~.80 Outrunner Brushless motor
    • ~60A Brushless ESC
    • ~Building and Field equipment
    • ~2 QTY - 11.1V 3200MAH LiPo Batteries
    • ~Battery charger that is compatible with selected battery
    • ~Motor mount for the electric motor
    • ~Propeller that is compatible with selected engine
    • ~FOR BOTH GAS AND ELECTRIC POWER YOU WILL NEED THE FOLLOWING:
    • ~4 channel radio w/4 stnadard servos (5 if using glow power)
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of