The Castle PRO BEC is intended for use in larger RC cars, electric aircraft, and helis that have high power demands for their radio/servo systems. It is ideal for most electric helis 500-size and larger. It will also work well in larger electric powered RC aircraft and RC crawlers and Monster Trucks that have high-powered servos.
Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.Specifications:Current Output: Peak: 10 amps Continuous: 12 volts input = 7 amps* 24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated. Output Voltage: Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately). Input Voltage: 5v to 25.2v (2S to 6S LiPo) Length: 1.2 (30mm)Width: 0.6 (15mm)Height: 0.4 (10mm)Weight: 0.4 oz (11 grams)
When you want your radio installation to be as high-end as possible, this is the switch you want installed. The heavy-duty design features a retractable dust cover on the charge/DSC plug and gold-plated connectors for a solid electrical connection. It s instantly compatible with radio systems that use the JR/UNI connector system. Suitable for sport models all the way up to giant-scale aircraft and helicopters.
This is the Hobbico Twist-Lock Glow Plug Clip with Alligator Clips. COMMENTS: Unlike most other clips this needs no soldering JMM 1/16/01 ir/jl
This is the Hobbico Panel-Ready Twist-Lock Glow Plug Clip. COMMENTS: Unlike most other clips this needs no soldering JMM 1/16/01 ir/jl
This is the Switch Harness for Futaba Radios with J Style Connectors.
This is the Switch Harness for Futaba Radios with J style connectors. The switch harness connects the receiver battery to the receiver by way of an ON/OFF switch. It also allows you to charge the receiver battery without removing it from the model. COMMENTS: To mount the charge cord and ON/OFF switch into the side of the airplane for recharging, use GPMM1000. pcd 3/17/94
This is a Futaba 6 Long Dual Servo Extension with Futaba J connectors. This extension allows you to hook up two servos to one channel on the receiver. One end of the wire has a male connector, but at the other end of the wire there are two female connectors one on top of the other. This does NOT Y.
Small Switch Harness w/Charge Cord
12" Heavy-Duty Servo Extension, Gold, with JR plug.
This adapter cable set allows you to connect 2S 7.4V, 3S 11.1V, 4S 14.8V and 5S 18.5V Thunder Power (and compatible) balance connector equipped batteries to JST XH (and compatible) balance connector equipped balancers and balancing chargers
This is the Switch Harness for Futaba Radios with a J Style Connector. This Switch Harness Connects the Battery to the Receiver by way of an ON/OFF Switch.
Y-Harness 6-inch/Reverser Standard
On/Off Switch and mount with Charge Cord.
Y Harness Adapter: UMX Beast
Y-Harness 6-inch Heavy-Duty
6.5mm High Current CC Bullet Connector Set
Y-Harness 6-inch Standard
36" Servo Extension
18" Servo Extension
4mm High Current CC Bullet Connector Set
Servo Extension 36-inch Heavy-Duty
Servo Extension 24-inch Heavy-Duty
JST Female Connector with Lead, 20 Gauge 2pc.
Servo Extension 18-inch Heavy-Duty
6" Servo Extension
Y Harness 18in.
Servo Extension 12-inch Standard