.030 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp!
.036 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp, in 3 popular sizes.
Our 4-Way Socket Wrench offers modelers a quality socket wrench at an affordable price. Available in two sizes (Standard and XL) our wrench will accommodate both American and Metric sizes (5/16, 3/8, 7/16, 1/2, 8mm, 10mm, 11mm, 12mm) Also features 3 built in glo-plug holders and special retaining clip. Storage Klip mounts securely to field box keeping 4-way wrench readily accessible. Comes complete with mounting screws for storage klip. 1 wrench and klip per package.
Our 4-way socket wrench offers modelers a quality socket wrench at an affordable price. Availabe in two sizes (standard and XL) our wrench will accommodate both American and metric sizes (5/16", 3/8", 7/16", 1/2", 8mm, 10mm, 11mm, 12mm). Also features 3 buit-in glo-plug holders and special tetaining clip.
This is the Dubro Idle-Adjust Screwdriver. This is used with any application where a flathead screwdriver is needed.
The Du-Bro Hinge Slotter Kit takes the hassle out of slotting control surfaces for gluing hinges. The centering/parallel guide centerd hinge slotter on up to 3/4" material. Four handle set plus guide and centering tool for three different size slotting forks: mini, standard and heavy duty hinges. Designed to work with all Du-Bro hinges. The 3 slotters and the "picker" are permanently mounted to red nylon handles. Packedged in reusable, recyclable clamshell storage blister.
DU-BROs Tru-Spin Prop Balancer is the most precise balancer on the market. Specially designed locking cone securely centers and locks props on to the balancing shaft for utmost accuracy. Each cone is carefully inspected on a calibrator to make sure it is running true. The balancing shaft is manufactured out of hardened material and then is centerless grounded giving precision balance every time. The prop balancer's aluminum wheels turn virtually friction-free for precision accuracy. The DU-BRO Tru-Spin Prop Balancer will balance model airplane props of all sizes and weights, boat props, spinners, car wheels, helicopter rotor heads, jet fans, fly wheels, etc. Each balancer comes complete with easy-to-follow assembly and prop balancing instructions. A truly precision instrument built for the modeler who expects the very best.
This is a 4-in-1 Installation Tool w/Convenient No-Slip Handle.
This is a 4-step prop reamer for standard size prop shafts(American measures). This is NOT for metric shafts. It is used to enlarge the hole on the prop because most of the time the hole is too small to fit the engine. This is the best way to do it because it will not split the prop and will keep the hole perfectly centered.
The Great Planes Accu-Throw Control Surface Deflection Meter Accurately Adjusts Control Throws for the Best Flight Performance on R/C Aircraft. This Gauge is UNASSEMBLED.
This is the Great Planes C.G. Machine Precision Aircraft Balancer. **Not designed for use with planes under 2 lbs flying weight** One 1x1 double sided tape (FTAP001) Two 1 self-stick round foam pad (FOAM002) Two #4 x 3/8 sheet metal screw (SCRW043) One Rule set (left and right, clear plastic NYLON142) Two 1/4 x 16 upright metal rod (ROD003) Two 3/16 x12 base metal rod (WIRES07) One C.G. Machine sticker (STKER46) One instructions (BALP01) COMMENTS: Available accessories to balance the airplane: GPMQ4485 Stick-on lead weights GPMQ4640 1/4-28 Brass spinner nut 2.5 ounce GPMQ4645 1 ounce spinner weight GPMQ4646 2 ounce spinner weight If the holes are slightly large around the rods, simply pinch them tight around the rods with a pair of pliers. (per R&D, AMC) axy 3/8/97 ir/jl updt jxs 9/29/08
This is a Dead Center Hole Locator for Locating Engine Mounting Holes. Great Planes Dead Center Hole Locater is a tool that should be in every modeler's toolbox. The tool is extremely easy to use. Simply press its self- centering alignment cone into the mounting hole with the engine positioned on the motor mount, and give the handle a few turns, the sharp drill tip leaves perfectly centered marks every time!
This is a Fingertip Prop or spinner back plate Balancer.
This is a Precision Hinge Center Marking Tool from Great Planes. This Marks Perfect Hinge Slot Locations Quickly and Easily. COMMENTS: Control Surface Hinges Must Be Installed In The Exact Center Of The Surface's leading edge. Just Place the Tool Over the Surface's Edge, Turn Until its Pivoting Feet are Flush Against Both Sides, Lower until the Steel Pin Touches the Edge, and Move the Tool Along the Length of the Surface. JAL 1/20/99 ir/jl
This is the Great Planes Metric Precision Prop Reamer. COMMENTS: Caution: Extremely sharp. Keep well oiled to avoid corrosion. jxs 12/15/03 ir/jxs
This is the Slot Machine Motorized Hinge Slotting Tool from Great Planes. Now Kit Building's Biggest Chore Takes Almost No Time At All! *** One Year Warranty *** COMMENTS: Highly recommended to practice making slots on scrap balsa before using the Slot Machine on your model. The Slot Machine works far better than a hobby knife for making slots in thin balsa and fragile structures because you do not have to push so hard while cutting. One thing to be aware of is when cutting into thin material, the possibility is greater of the blades coming out of the wood during the cut, due to misalignment or technique. Blades: Replacement Blades: GPMR4015 for CA Hinges (comes stock) Slot Machine Cuts Slots To Accommodate Most Hinges and Tail Gear Brackets Such As: Great Planes, Sullivan, Goldberg (Klett), Sonic-Tronics and Dubro (except for the cotter pin hinges-slot will have to be deepened 1/16 more). (The thicker blades for nylon hinges will produce a slot that is the right thickness, but NOT DEEP ENOUGH for the Dubro heavy duty hinges. The difference in depth is .08 (a little under 3/32). In many cases, the modeler can cut 3/32 off the tabs of heavy duty hinges, and use the slots cut by the Slot Machine.) OR modeler can use GPMR4017 heavy duty hinge blades. Optional Blades: GPMR4016 for Nylon Hinges or Tail Gear Brackets. Length of Blade: 3/4 Total Thickness: 0.024 (0.6mm) Blade Cutting Depth: 0.179 Optional Blades: GPMR4017 for Heavy Duty Nylon Hinges Length of Blade: 1-5/8 Total Thickness: 0.037 Blade Cutting Depth: 0.729 Blade changes are simple by removing only four phillips head screws. (a soldering iron may be used to heat the locktight on the screws) Safety Precautions: Blades are sharp: Keep Out Of Reach Of Children, use safety equipment, secure parts being cut, use for hobby use only. ir/jl
With 1000 watts of power, adjustable heat levels and a removable nozzle to concentrate heat where it s needed.
Convenience and safety---you get both with Hangar 9's new Remote Glow Plug Adapter. Designed for airplanes with hard-to-reach glow plugs, this accessory allows modelers to energize the glow plug from an accessible remote location on the fuselage. It includes everything necessary for installation, including 6 inches of flexible silicone wire and a rubber insulated glow plug terminal.
Basic iron features precise thermostatic-control up to 450 , plus contoured shoe and safety stand.Teflon is a trademark or registered trademark of E.I. DuPont de Nemours and Co. Corporation, Wilmington, Delaware.
This is a Heli-Max Blade Balancer. It is used for balancing helicopter Main Blades. th 10-25-05 ir/jxs NOTES: If replacement bearings are needed, use DTXC1569 upGX7/11/12
This is a 4-Way Wrench with Plug Storage. It can be used to tighten and loosen Glow Plugs and prop nuts or any nut in the proper size range.
The Hobbico Safe Start chicken stick is a safe, easy way to Flip-Start Glow Powered Engines. This stick is held in your hand and with the extended end placed against the propeller on the engine. Then with a quick flip of the wrist to rotate the prop, starting the engine.
Hobbico's Nickle Plated T-Pins, are made for High Strength Steel and Have the Sharpest Points You'll Find. COMMENTS: They are T Shaped to Help Protect Your Fingers When Pulling Them From Balsa. Much Better Than Regular Straight Pins. 10-06-98kzh 8.22.11jml ir/jl