• Specialty Tools & Starting Equipment

  • Showing: 1 - 30 of 136
    Sort by:
    Product description
    AKA Products Premium Tire Glue By AKA ProductsAKA38001

    Bond Strength: Glue is all about bond strength. AKA has done exhaustive testing and research to find the freshest, purest, strongest CA glue to bond rubber tires. AKA glue bonds in seconds without any accelerators and gives you the strongest bond to keep your tires on the wheels to endure even the most rugged conditions.

    $9.99
    Add to Cart
    Qty:
    Product description
    Du-Bro Body Reamer & Scissor Curved Set By Du-BroDUB2330

    Two essential tools for the shop are the Body Reamer Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custom shape, you need quality equipment.

    • Body reamer allows precise control and drilling of custom sizes
    • Contains: One Reamer, one pair body scissors
    • Scissors designed specifically for cutting accurately through Lexan
    $15.79
    Add to Cart
    Qty:
    Product description
    Du-Bro Body Reamer Scissors Curved & Straight Set By Du-BroDUB2331
    $22.00

    Two essential tools for the shop are the Body Reamer and Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custom shape, you need quality equipment.

    • Includes: Body Reamer, Scissors (Straight) and Scissors (Curved) as a Set
    Product description
    DuraTrax Body Reamer By DuratraxDTXR1158

    This is the Duratrax Body Reamer. jxs 04/03/12 ir/jxs

    • Fluted blade removes debris while cutting
    • Super sharp cutting tip cuts and enlarges holes in polycarbonate, ABS, balsa and other hobby materials
    $12.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Body Scissors and Reamer Set 2 Piece By DuratraxDTXR1160

    This is the Duratrax Body Reamer and Body Scissors Set. jxs 04/03/12 ir/jxs

    • Fluted blade removes debris while cutting
    • Large comfortable no roll design handle resists rolling off of workbench or pit table
    • Super sharp cutting tip cuts and enlarges holes in polycarbonate, ABS, balsa and other hobby materials
    $14.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Body Scissors and Reamer Set 3 Piece By DuratraxDTXR1161

    This is the Duratrax Body Reamer and two Body Scissors. jxs 04/03/12 ir/jxs

    • Fluted blade removes debris while cutting
    • Large comfortable no roll design handle resists rolling off of workbench or pit table
    • Super sharp cutting tip cuts and enlarges holes in polycarbonate, ABS, balsa and other hobby materials
    $21.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Charge Lead Banana Plugs To Traxxas Male By DuratraxDTXC2222

    This is the DuraTrax Charge Lead with Banana Plugs and Traxxas Male Connector. cnh 10/11/08 ir/jxs

    $12.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Deluxe Car Wrench By DuratraxDTXR1170
    $5.99

    This is the DuraTrax Deluxe Car Wrench.

    • Fits most Metric nuts, including wheel nuts and glow plugs 8mm socket includes spring clip for holding glow plugs
    • Handy storage for up to four glow plugs
    • Special 10mm socket for pilot shafts
    • Steel construction
    Product description
    DuraTrax Engine Tuning Screwdriver 3.2x120mm By DuratraxDTXR0185

    This is a Standard Slot-Head Engine Tuning Screwdriver 3.2 x 120mm. COMMENTS: This slot head screwdriver has a flat blade tip. JAL 5/19/00 ir/jl

    • Comfortable handles are made of polypropylene, with a rubberized finish that enables modelers to get a firm grip.
    • Durable, magnetized, heat-treated, Black tip tops off the precision ground Chrome Vanadium steel shaft.
    • Ideal for tuning/adjusting High- /Low-Speed needle valves and throttle stop screws on glow powered radio controlled engines.
    • Top of handle has a hexagonal design to keep it from rolling away when laid on a work surface.
    $5.99
    Add to Cart
    Qty:
    Product description
    DuraTrax FlashPoint Infrared Temperature Gauge By DuratraxDTXP3100

    This is the DuraTrax Flashpoint Infrared Temperature Gauge. ONE YEAR LIMITED WARRANTY COMMENTS: This temperature gun accurately measures R/C engine temperatures, but modeler should always refer to engine instruction manual for proper tuning and set-up. Temperature alone is not an accurate indicator of proper engine performance. jxs 7/16/03 ir/jxs

    • Auto-off timer preserves battery power by shutting down unit after 15 seconds if not used
    • Large LCD for easy viewing
    • Monitors temperatures of engines, sealing irons, electric motors and battery packs
    • Palm sized 1.13 ounce reads wide temperature range from -27¦ to +428¦F (-33¦ to +220¦C)
    • Special mode settings allow user to find, hold, and display minimums and maximums of fluctuating temperatures to provide the most accurate information
    • Wireless for safe and accurate readings without touching the heat source-simply point, push a button, and read the results
    $37.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Kwik Trak 7 Racing Cone 6pc By DuratraxDTXC2377

    This is a Set of Kwik Trak 6.5 Race Track Cones.

    • For use with vehicles of any scale. 7 height is ideal for maximum visibility, without taking up too much room or obscuring the racer's view of his vehicle.
    • Made of hard orange plastic (resemble small road construction pylons)
    • One hole on each corner of the square flat base for securing to the ground.
    • These durable cones turn any driveway, parking lot or dirt area into an radio control race track.
    $8.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Kwik-Pit 500cc Fuel Bottle By DuratraxDTXP0150

    The Team Duratrax Kwik-Pit 500cc (16 oz) Kwik-Pit Fuel Bottle. SPEC: Fuel Capacity: 500cc (16oz) Fueling Nozzle Outer Diameter: 8mm COMMENTS: Also Available DTXP0125 (250cc) For Replacement Spout Cap, Use GPMQ4190. JAL 4/22/99 ir/jl

    • Anodized Aluminum Blue Spout (Neck) With A Curved End 5 Long Neck To Easily Reach Inside Bodies
    • Great For Glow Fuel Powered 1/10th and 1/8th Scale Vehicles
    • Made of Semi-Clear Plastic
    • Marked in 10cc Increments
    $8.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Kwik-Pit 500cc Fuel Bottle By DuratraxDTXP0150

    The Team Duratrax Kwik-Pit 500cc (16 oz) Kwik-Pit Fuel Bottle. SPEC: Fuel Capacity: 500cc (16oz) Fueling Nozzle Outer Diameter: 8mm COMMENTS: Also Available DTXP0125 (250cc) For Replacement Spout Cap, Use GPMQ4190. JAL 4/22/99 ir/jl

    • Anodized Aluminum Blue Spout (Neck) With A Curved End 5 Long Neck To Easily Reach Inside Bodies
    • Great For Glow Fuel Powered 1/10th and 1/8th Scale Vehicles
    • Made of Semi-Clear Plastic
    • Marked in 10cc Increments
    $8.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Onyx 110 AC/DC Peak Charger NiCD NiMH By DuratraxDTXP4191

    This is the Duratrax Onyx 110 AC/DC NiCd and NiMH Peak Charger. **Will Not Charge LiPo Batteries** jxs 08/07/14 ir/jxs

    • Auto-start function with status LED for easy set-up
    • Automatically stops charging after 90 minutes
    • Built-in socket for charging 4-5 cell receiver batteries and 8-cell transmitter packs
    • Built-in switching AC power supplyFIVE YEAR warranty through Hobby Services (U.S.A.
    • Charges 4-8 cell NiCd or NiMH cells (4-7 cells on DC power)
    • Peak detection with automatic trickle charge
    • Selectable charge current for batteries for 1/18-1/8 scale models
    $24.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Onyx 150 AC/DC LiPo Balancing Charger By DuratraxDTXP4195

    This is the Duratrax Onyx 150 AC/DC Balancing LiPo Charger. ***When charging LiPo batteries, the Main Charge Lead and the Balance Lead**** ***********MUST be connected in order for the charger to operate.************* ***********If only one connection is made, the charger will remain************ ****************in Standby mode until both leads are connected.**************** COMMENTS: All errors are displayed by an orange LED. See the error code reference chart located in the instruction manual. Once the Onyx 150 has finished charging, the red LED will flash repeatedly in conjunction with audible tones. After the flashes and tones stop, the red LED will continue to flash once for each cell connected. jxs 07/25/12 ir/jxs updt jxs 08/08/12 updt jxs 08/20/12

    • Built-in cooling fan
    • Charges 1-3 LiPo cells only
    • Compact switching power supply and AC/DC power cords
    • Deans Ultra Plug male connector, Traxxas adapter, and universal radio jack for 1-3S LiPo receiver packs
    • Ninety minute safety timer
    • Reverse polarity and current overload circuitryFIVE YEAR warranty through Hobby Services (U.S.A.
    • Sound cues for easy setup and tri-color LED constantly shows charge status
    • Switch selectable charge rates for 1-3S LiPo power and radio packs
    $54.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Onyx 200 AC/DC Sport Peak Charger By DuratraxDTXP4200

    This is the DuraTrax Onyx 200 AC/DC Sport Peak Charger with LEDs. Designed for sport electric car or boat modelers that use NiCd or NiMH batteries. COMMENTS: For batteries using a Traxxas type connector, order the TRAC3061 adapter. jxs 1/29/08 ir/jxs updt jxs 05/24/11

    • Audible tones and multiple LEDs for simple setup and use
    • Built-in jack included for charging 4 or 5 cell NiCd or NiMH receiver batteries for nitro models, or for monitoring charge voltage of battery connected to the main output with a separate digital voltmeter
    • Charges 4-7 cell NiCd or NiMH (4.8 - 8.4V) cells with a capacity range of 750 - 7500mAh
    • Compatible with AAA size cells up to the highest capacity sub-C cells as well as 4-5 cell nitro receiver packs AC and DC input capabilities make it perfect for indoor or outdoor use
    • Lightweight switching AC power supply delivers up to 5 amps of charge current
    • Precise peak detection algorithm with automatic TRICKLE charge fills packs completely for optimum voltage and run time
    • Pushbutton control and five LED indicators (4 Red, 1 Green), audible tones and built-in leads for simplicity and convenience
    $39.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Onyx 235 AC/DC Advanced Charger w/Balancing LCD By DuratraxDTXP4235

    This is the DuraTrax Onyx 235 AC/DC Advanced Charger with Built-In Balancer. Combines the proven features of the Onyx 230 with balancing and other asked for extras. Also charges LiPo, Li-Ion, and LiFe packs. *** When charging LiPo batteries, the Main Charge Lead and the Balance Lead *** *********** MUST be connected in order for the charger to operate. ************ *********** If only one connection is made, the charger will sound ************ ********************* an alarm when charging is initiated. ******************** DTXC2223 Chrge Lead Banana to Mini Plug HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY HCAP0105 JR Tx/Rx Charge Leads HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads GPMM3149 Charge Lead Banana/Deans Micro jxs 1/18/11 updt jxs 08/08/12

    • Balancing jack for up to 4 lithium cells
    • Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included
    • Built-in fan for long lasting performance
    • Charges 1-10 cell NiCd or NiMH (1.2 - 12V) cells and 1-4 cell LiPo
    • Custom CC/CV charge algorithm carfully charges Lithium Polymer,
    • Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltges, peak voltage, charge current, charge capacity and time and more
    • Detachable AC and DC input power cords USB jack for charging music players, cell phones and other accessories
    • Li-Ion or LiFe (3.7 - 14.8V) cells
    • Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely
    • Mini USB jack for downloading firmware
    • Precise peak detection with automatic TRICKLE charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance
    • Pushbutton controls and audible tones for easy setup and control
    • Small lightweight switching AC power supply delivers up to 5 amps of charge current
    • Universal jack for charging radio batteries
    $89.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Onyx 240 AC/DC Dual Charger w/LCD By DuratraxDTXP4240
    $89.99

    This is the DuraTrax Onyx 240 AC/DC Dual Charger with Backlit LCDs. Excellent for electric powered models that use two NiCd or NiMH simultaneously or modelers who rotate through multiple batteries at the field or track. **Attention International Customers-** **The AC input voltage of this charger is 110V.** **240 refers only to the model number.** COMMENTS: For batteries using a Traxxas type connector, order the TRAC3061 adapter. jxs 3/07/08 ir/jxs updt jxs 05/24/11

    • Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells
    • Custom LCD with Blue backlight shows battery voltage, charge current time and capacity-one for each output
    • NiCd and NiMH compatibility with custom peak detections-each output
    • Selectable charge currents of 800mA, 1.5A, 3A and 5A with auto- TRICKLE-each output
    • Simple pushbutton controls and audible tones aid in setup and use- each output DC power lead with alligator clips easily connects to many 12V DC power sources
    • Two independent outputs each with identical features and functions
    • Unique built-in jack for charging 4 - 5 cell receiver packs for nitro models, even Tx packs-each output
    Product description
    DuraTrax Onyx 245 AC/DC Dual Charger w/Balancing By DuratraxDTXP4245

    This is the DuraTrax Onyx 245 AC/DC Dual Charger with LiPo Balancing. Winner of the 2014 RC Car Action Reader's Choice Award! *** When charging LiPo batteries, the Main Charge Lead and the Balance Lead *** *********** MUST be connected in order for the charger to operate. ************ *********** If only one connection is made, the charger will sound ************ ********************* an alarm when charging is initiated. ******************** Specifications for Each Output; Battery Types: 4-8 cell NiMH or NiCd, 1-3 cell LiPo or LiFe (3.7-11.1V) packs Battery Capacity: 100-7500mAh Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output) Fast Charge Termination: Peak detection for NiCd and NiMH, cc/cv for lithiums Fast Charge Safety Timer: 90 minutes NiCd/NiMH Peak Sensitivity: 8mV for NiCd; 5mV for NiMH NiCd/NiMH Auto-Trickle Current: Auto (50, 100, 150, 250mA) jxs 08/30/11 ir/jxs updt jxs 08/08/12

    • Both outputs are compatible with LiPo, LiFe, NiMH and NiCd batteries and the Onyx 245 can charge two batteries of different chemistries simultaneously
    • Charges 1-3 cell LiPo and LiFe (3.7-11.1V) and 4-8 cell NiCd and
    • Each output includes a jack for charging transmitter packs and 4-5 cell receiver packs
    • NiMH batteries
    $119.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Pit Tech Deluxe Car Stand Blue By DuratraxDTXC2370

    This is the Pit Tech Deluxe Car Stand from DuraTrax. This is a convenient workstation for 1/8, 1/10 and 1/12 cars and trucks.

    • Built-in holes to keep shocks handy when rebuilding.
    • Dropped center section accommadates models w/uneven chassis bottoms.
    • Easily accessible extra-large parts tray in base.
    • Molded rubber inserts in the upper plate to grip chassis securely.
    • Stand can be disassembled & stored flat for easy transport/storage.
    • Sturdy Dark Blue, high-impact polystyrene stand w/rotating top plate.
    $15.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Pit Tech Deluxe Car Stand Orange By DuratraxDTXC2371

    This is the Pit Tech Deluxe Car Stand from DuraTrax. This is a convenient workstation for 1/8, 1/10 and 1/12 cars and trucks.

    • Built-in holes to keep shocks handy when rebuilding.
    • Dropped center section accommadates models w/uneven chassis bottoms.
    • Easily accessible extra-large parts tray in base.
    • Molded rubber inserts in the upper plate to grip chassis securely.
    • Stand can be disassembled & stored flat for easy transport/storage.
    • Sturdy Orange, high-impact polystyrene stand w/rotating top plate.
    $15.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Pit Tech Deluxe Car Stand Orange By DuratraxDTXC2371

    This is the Pit Tech Deluxe Car Stand from DuraTrax. This is a convenient workstation for 1/8, 1/10 and 1/12 cars and trucks.

    • Built-in holes to keep shocks handy when rebuilding.
    • Dropped center section accommadates models w/uneven chassis bottoms.
    • Easily accessible extra-large parts tray in base.
    • Molded rubber inserts in the upper plate to grip chassis securely.
    • Stand can be disassembled & stored flat for easy transport/storage.
    • Sturdy Orange, high-impact polystyrene stand w/rotating top plate.
    $15.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Power Kit 1500 7.2V NiMH 2-3Hr Wall Charger 8AA By DuratraxDTXP4615

    This is the Duratrax Power Kit for Electric Ready to Run Vehicles. **IMPORTANT! Make sure the 7.2V 1500mAh NiMH battery included** **in this Power Kit IS FULLY DISCHARGED prior to being** **connected to the included charger. Do NOT allow fully discharged** **batteries to remain connected to the included charger for longer** **than 3 hours. Failure to obey these warnings can result in an** **over-charge condition of the NiMH battery, and possibly result** **in a FIRE.** Eight AA batteries for most pistol grip transmitters jxs 11/01/10 ir/jxs updt jxs 05/08/13

    • Battery charges in just 2-3 hours with wall charger
    • Ideal for sport and backyard basher RTR vehicles requiring a 6-cell stick battery pack with Standard connector
    $24.99
    Add to Cart
    Qty:
    Product description
    DuraTrax Pit Tech Deluxe Truck Stand Blue By DuratraxDTXC2380

    This is the Pit Tech Deluxe Truck Stand in Blue from Duratrax. jxs 10/23/13 ir/jxs

    • Constructed of sturdy, high-impact polystyrene with aluminum center post
    • Easily accessible extra-large parts tray
    • Molded rubber strips on upper plate grips chassis securely
    • Rotating top plate with dropped center section to accomodate models with uneven chassis
    • Wide reinforced base and tall center post is ideal for monster trucks and 1/8 scale buggies and truggies
    $24.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC 7.2V 800Ma Nicd Wall Charger By Dynamite RCDYN4051

    Dynamite's economical 800mA Ni-MH/Ni-Cd Wall Charger comes prewired with a Tamiya connector, meaning it can be used with many of the R/C car battery packs available. Its 800mA charge rate and compatibility with a standard 110V wall outlet make this a handy accessory perfect for trips and will fit in any suitcase and even your coat pocket.

    • Dynamite's 800mA Ni-Cd Wall Charger is an economical alternative to more expensive quick chargers. It comes prewired with a Tamiya connector, meaning it can be used with just about any of the hundreds of R/C car battery packs available. Its 800mA charge r
    • Dynamite's 800mA Ni-Cd Wall Charger is an economical alternative to more expensive quick chargers. It comes prewired with a Tamiya connector, meaning it can be used with just about any of the hundreds of R/C car battery packs available. Its 800mA charge r
    $11.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC Balance Lead Extension 9": DYN By Dynamite RCDYN5019

    Balance Lead Extension 9": DYN

    • 2S, 3S and 4S extensions included
    • JST-XH connectors
    $7.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC C Alkaline Glow Driver By Dynamite RCDYN1945

    Dynamite offers a wide variety of Dyna-Glow glow drivers, so make sure you choose the right model for you. For power, you can choose a version that uses either a C or D -size alkaline battery or a Ni-Cd version that includes a Sanyo sub-C battery and is available with or without an overnight wall charger. The Metered Locking glow drivers let you easily see if the Dyna-Glow is drawing a current when attached to the glow plug.Each Dyna-Glow glow driver features a durable red-anodized aluminum case. The Sure-Lock glow plug attachment secures the Dyna-Glow around the body of the glow plug for hands-free starting. The contoured Comfort-Grip finger clip makes installing and removing the Dyna-Glow easy and virtually slipproof.

    $8.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC Charge Adapter TAM Female To EC3 Device By Dynamite RCDYNC0067

    Charge Adapter: TAM Female To EC3 Device

    $4.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC Charge Adapter TAM Female to Losi Micro By Dynamite RCDYNC0069

    Charge Adapter: TAM Female to Losi Micro

    $2.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC D Alkaline Glow Driver By Dynamite RCDYN1950

    Dynamite offers a wide variety of Dyna-Glow glow drivers, so make sure you choose the right model for you. For power, you can choose a version that uses either a C or D -size alkaline battery or a Ni-Cd version that includes a Sanyo sub-C battery and is available with or without an overnight wall charger. The Metered Locking glow drivers let you easily see if the Dyna-Glow is drawing a current when attached to the glow plug.Each Dyna-Glow glow driver features a durable red-anodized aluminum case. The Sure-Lock glow plug attachment secures the Dyna-Glow around the body of the glow plug for hands-free starting. The contoured Comfort-Grip finger clip makes installing and removing the Dyna-Glow easy and virtually slipproof.

    $9.99
    Add to Cart
    Qty: