• Radio Control Cars

  • Showing: 1 - 30 of 3353
    Sort by:
    Product description
    Traxxas X-Maxx Brushless Electric RTR w/TQi 2.4GHz
    $799.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 2.4GHz Radio Controlled, Brushless Electric Powered, Ready to Run Traxxas X-Maxx. Innovative New Features Include; **Exclusive Self-Righting Action, if vehicle rolls upside down** **just press a button on the transmitter and in most cases** **the X-Maxx will flip upright onto its wheels.** **One handed body mount and removal system** **eliminates body posts and pins.** **Battery Retention System eliminates body clips or hook and loop straps** **Shock towers also serve as carrying handles and level supports** **when vehicle is placed upside down for maintenance.** **Additional Technical Info Will Be Added When It Becomes Available.** COMMENTS: Available in the following colors; Blue, TRAD75BB Red, TRAD75RR For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set jxs 10/30/15

    • Ball Bearings: Sealed, full contact
    • Battery Retention System: Integrated into chassis top brace for greater rigidity, eliminates body clips or hook and loop straps, adjustable for different batteries
    • Body Mount System: Quick one-hand body installation and removal, pivoting rear latch mechanism eliminates body posts and clips
    • Body: ProGraphix painted and trimmed
    • Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum heat sink
    • Bumpers: Front and rear composite plastic with impact cushions behind each bumper to soften blows and add to durability
    • Chassis: Composite nylon tub, modular design provides easy access to critical components, lower front and rear skids and integrated nerf bars for front, rear and side impact protection
    • Differentials: Sealed hardened steel bevel, oil filled, limited slip
    • Drive Four wheel shaft drive, high-strength steel CV driveshafts with splined wheel hexes that eliminate axle pins, aluminum splined center driveshaft
    • Electronic Speed Control: Velineon VXL-6s 6S LiPo compatible
    • Motor Mount: Cradle design eliminates flexing, keyed pins lock gear mesh in place
    • Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready receiver, BEC voltage and motor temperature sensors installed, self righting button, built-in fail safe, can be equipped with the TQi Docking Base along with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Traxxas Link TQi Wireless Module required (not included)
    • Shock Towers: Composite plastic construction, also serve as carrying handles and level supports when vehicle is placed upside down
    • Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps shafts clean reducing seal wear
    • Slipper Clutch: Dual fan cooled
    • Steering Servo: High-torque with aluminum heat sink, double shear bearing supported servo horn
    • Steering: Bellcrank
    • Suspension: Captured high-strength steel pins, double sheer connections, adjustable roll center
    • Tires: Aggressive all-terrain tread 8 x 4 x 4 foam inserts
    • Transmission; Single speed
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
    $799.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas 1/10 E-REVO BRUSHLESS 4WD RTR 2.4GHZ TSM
    $769.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system with Traxxas Stability Management, Traxxas Link Wireless Module, MXL-6s Brushless Power System, two Power Cell 8.4V 3000mAh batteries with iD, 4amp DC Peak Detecting Fast Charger and ProGraphix® painted bod

    • Traxxas Stability Management
    • Traxxas TQi 2.4GHz Radio System w/Traxxas Link Wireless Module
    • Equipped with RPM/speed, motor temperature, and voltage telemetry sensors
    • Waterproof MXL-6s Brushless Power System
    • Up to 25.2 Volts of Massive Brushless Power
    • State-of-the-Art Integrated Chassis Design
    • Heavy-Duty 17mm Splined Aluminum Hex Hubs and Wheel Nuts
    • Hard-Anodized PTFE-Coated Aluminum GTR Shocks
    • Traxxas 4amp DC Peak Detecting Fast Charger
    • Two Traxxas 7-cell NiMH battery with iD
    • 65+mph Top Speed with optional 3S LiPo batteries!
    $769.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    XO-1 RTR w/Stability Management TQi 2.4GHz
    $749.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 1/7 scale, brushless electric powered, 2.4GHz TQi radio controlled Traxxas Ready To Run XO-1 On-Road Car with Traxxas Stability Management. For Expert Level RC Car Drivers at Least 16 Years of Age. Vehicle- COMMENTS: Unlocking 100+mph speed capability requires the Traxxas Link App (download from the App Store), an iPhone or iPod touch (sold separately). The canard equipped High-Downforce splitter and the 34 tooth Pinion Gear and 46 tooth Spur Gear (all included) must also be installed. The Traxxas XO-1 is available with the following body colors; Blue, TRAD55BB Red, TRAD55RR Black, TRAD55LL White, TRAD55WW The Duratrax DTXC1866, Onyx LiPo 3S 11.1V 5000mAh 25C is an ideal replacement battery. The Traxxas LiPo batteries #2878 (TRAC2878), and #2857 (TRAC2857) require the Battery Tray Expansion Kit #6427X (TRAC6429), and #6426X (TRAC6430). All original bearings used in the XO-1 are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded Duratrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 10x15mm Fr Hubs 1 DTXC1595 1 TRAC5119 2 6x12mm Fr Hubs 1 DTXC1569 1 TRAC5117 2 8x16mm Fr Gearbox 1 DTXC1585 1 TRAC5118 2 6x12mm Fr Gearbox 1 DTXC1569 1 TRAC5117 4 5x8mm Steering 2 DTXC1523 2 TRAC4611 2 12x18mm Ctr Bearing Carrier 1 DTXC1597 1 TRAC5120 4 6x12mm Rear Hubs 1 DTXC1569 1 TRAC5117 2 10x15mm R Diff 1 DTXC1595 1 TRAC5119 1 8x16mm R Diff 1 DTXC1585 1 TRAC5118 1 12x18mm R Diff 1 DTXC1597 1 TRAC5120 1 10x15mm Spur Gear 1 DTXC1595 1 TRAC5119 1 10x15mm Fr Diff 1 DTXC1595 1 TRAC5119 1 8x16mm Fr Diff 1 DTXC1585 1 TRAC5118 2 6x12mm Fr Diff 1 DTXC1569 1 TRAC5117 jxs 07/30/15 ir/jxs

    • Application with the included Traxxas Link Module for instant Bluetooth connectivity to an intuitive high definition graphical user interface featuring Real-Time
    • Ball Bearings: Full set, rubber sealed
    • Battery Compartment: Scalable to fit different size batteries 6.1 x 1.9 x 1.1 (155mm x 50mm x 29mm), optional expansion kit for eight selectable height configurations
    • Body: Trimmed and painted 0.04 (1mm) thick polycarbonate with injection molded rear wing
    • Brushless Motor: Traxxas/Castle Creations Big Block 1717 brushless motor with ABEC-1 bearings, finned heat dissipating case, sintered Neodymium magnets and superior electromagnetic design for massive acceleration
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: 0.12 (3mm) thick 6061 aluminum, dual plane design, dark titanium in color with channeled extensions, front splitter, smooth undertray and rear diffuser (canard equipped High-Downforce splitter included) must be installed for 100mph operation, see COMMENTS below
    • Differentials: Revo spec sealed, silicone filled limited slip with hardened steel bevel gears and 5mm output shafts
    • Drive: All wheel with extruded aluminum main driveshaft with steel spline dual CV driveshafts and Cush Drive system-an elastomer damper between the spur gear and drive hub to absorb drivetrain shocks
    • ESC: Castle Creations Mamba Monster Extreme with integrated capacity bank and proprietary software created only for the XO-1, programmable low voltage detection, reverse delay with lockout
    • Module that allows wireless connection to the Traxxas Link
    • Motor Mount: 8mm thick aluminum
    • Profile Customization and Sharing 5 channel receiver with 3 telemetry ports, factory installed telemetry sensors, and failsafe is included and enables model to be tuned from an iPhone 4S, 5, 5C 5S or iPod
    • Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    • Shock Towers: Blue-anodized 7075-T6 aluminum
    • Shocks: Oil-filled hard anodized aluminum GTR shocks with titanium nitride shafts, road-tuned 1.6N/mm (9.1lb) rate springs
    • Steering Servo: Traxxas 2075 digital high-torque
    • Steering/Braking Dual Rate, Servo Reversing, Endpoint Adjustment,
    • Steering: Dual bellcrank with integrated servo saver, blue-anodized 6061-T6 aluminum steering blocks with 6x12mm ball bearings
    • Telemetry, Customizable Dashboards, Steering/Throttle Expo,
    • Tires: 118+mph speed rated belted slicks with foam inserts, 4.29 (109mm) outer diameter, 1.7 (43mm) wide front, 2 (51mm) wide rear
    • Touch 5th generation or later, iPad 3rd generation or later, or iPad Mini
    • Transmission: Single speed
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Wheels: Black chrome Split spoke with 17mm hex
    $749.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    1/10 E-Maxx Brushless RTR w/TSM 2.4GHz
    $719.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled Ready to Run Traxxas E-Maxx Monster Truck. with Traxxas Stability Management. Powered by the factory installed Castle Creations MXL-6s Waterproof Brushless Power System. Includes Wireless Module and Telemetry Sensors. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x12mm Fr Axle Carrier 1 DTXC1569 2 12x18mm Fr Axle Carrier 1 DTXC1597 2 6x12mm R Axle Carrier 1 DTXC1569 2 12x18mm R Axle Carrier 1 DTXC1597 2 5x11mm Steering Bellcranks 1 DTXC1547 3 5x11mm Fr Diff 1 DTXC1547 2 5x11mm Idler gear 1 DTXC1547 2 6x12mm Output Shaft 1 DTXC1569 1 10x15mm R Diff 1 DTXC1595 1 8x16mm R Diff 1 DTXC1585 2 6x12mm R Diff 1 DTXC1569 Available in the following body colors; Blue, TRAD29BB Red, TRAD29RR Black, TRAD29LL Silver, TRAD29SS jxs 10/31/14 ir/jxs

    • Application with the included Traxxas Link Module for instant Bluetooth connectivity to an intuitive high definition graphical user interface featuring Real-Time
    • Ball Bearings: Full set, rubber sealed
    • Batteries: Two Traxxas Power Cell 3000mAh NiMH 7-cell flat packs with
    • Battery Charger: 4A DC powered peak detecting
    • Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings
    • Bumpers: Plastic front and rear with kickups
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: 0.08 (2mm) thick composite with quick release hold downs and scaleable battery components to fit a variety of stick or side-by-side packs
    • Differentials: Revo spec with X-ring seals to keep oil in and dirt out, bevel gear design, sealed limited slip
    • Drive: Four wheel shaft drive with Revo spec sealed large diameter outer and center drive shafts
    • Electronic Speed Control: Castle Creations MXL-6s, cooling fan, 6.5mm gold-plated connectors, high efficiency heatsink
    • Gearbox: Sealed
    • Module that allows wireless connection to the Traxxas Link
    • Motor: Castle Creations MXL-6s 2200kV brushless, 6S capable, high- strength neodymium magnets, 5mm shaft, aluminum motor can
    • Profile Customization and Sharing 5 channel receiver with 3 telemetry ports, factory installed telemetry sensors, and failsafe is included and enables model to be tuned from an iPhone 4S, 5, 5C 5S or iPod
    • Radio: Traxxas TQi DSSS 2.4GHz high output with Traxxas Link Wireless
    • Shocks: Eight oil-filled, composite bodied with white springs, rubber pressure bladders and double O-ring seals
    • Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum slipper clutch friction pads
    • Steering/Braking Dual Rate, Servo Reversing, Endpoint Adjustment,
    • Suspension: Adjustable Revo Spec sealed pivot balls
    • Telemetry, Customizable Dashboards, Steering/Throttle Expo,
    • Tires: Treaded soft compound Maxx 6.3 (160mm) outer diameter 3.3 (85mm) wide
    • Touch 5th generation or later, iPad 3rd generation or later, or iPad Mini
    • Transmission: Heavy duty brushless ready, two-speed reversing transmission with steel idler gear
    • Traxxas High Current connectors, 16.8V total power, iD Auto
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Wheels: 3.8 (96mm) diameter black chrome 10 spoke (spokes are in groups of two) 2.7 (70mm) width, 17mm hex **To use wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954** **and one Nylon Locknut Set, TRAC4149**
    $719.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas Summit RTR 4WD Monster Truck w/TQi 2.4GHz, Battery & DC Charger
    $639.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 2.4GHz radio controlled, electric powered, ready to run, 1/10 scale Traxxas Summit Extreme Terrain Monster Truck w/ LED Light set. **Body color and graphics may differ from photo.** COMMENTS: The 2.4GHz Summit RTR is available in the following body colors; Blue, TRAC84BB Black, TRAC84LL Green, TRAC84GG Red, TRAC84RR All original bearings used in the Summit are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. Duratrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 6x13mm F.Axle Carrier 1 DTXC1573 1 TRAC5180 2 6x13mm R.Axle Carrier 1 DTXC1573 1 TRAC5180 1 5x8mm Steering 1 DTXC1523 1 TRAC5114 1 5x11mm Steering 1 DTXC1547 1 TRAC5116 4 5x11mm Front Rocker Arms 2 DTXC1547 2 TRAC5116 2 6x13mm Diff Ring 1 DTXC1573 1 TRAC5180 1 8x16mm Diff Gear 1 DTXC1585 1 TRAC5118 1 6x12mm Diff Output 1 DTXC1569 1 TRAC5117 1 5x8mm Carrier Diff 1 DTXC1523 1 TRAC5114 2 5x8mm Locking Diff 1 DTXC1523 1 TRAC5114 12 6x12mm Transmission 1 DTXC1569 1 TRAC5117 4 5x11mm Rear Rocker Arms 2 DTXC1547 2 TRAC5116 jxs 04/03/15 ir/jxs

    • T-Lock™ Remote Locking Differentials
    • iD connectors included as standard equipment 
    • Transmitter-operated high-low range transmission
    • Authentic and functional ExoCage body system
    • Brilliant 10 LED lighting system
    • Huge 7-inch Canyon AT tires
    • 3.8-inch Geode wheels with 17mm hex and beadlock- style sidewall protectors
    • Titan® 775 high-torque motor
    • Waterproof electronics run in water, mud, and snow
    • Smooth center skid plate shields the driveline
    • Dual digital waterproof steering servo delivers 250 oz-in of combined torque & 0.16-sec transit time
    • 17mm aluminum hex hubs and nuts
    • Hard anodized, Teflon-coated GTR shocks with Ti-Nitride shafts
    • EVX-2 16.8-volt FWD/REV Electronic Speed Control
    • Quick release battery doors
    • Battery cooling vents
    • Brushless Ready™ high/low transmission
    • Sealed pivot ball suspension
    • Hex hardware throughout
    • Ready-To-Drive®
    • TQi 2.4GHz Transmitter
    • Compatible with optional Traxxas Link Wireless Module (TRA6511) to access full Traxxas Link app functionality
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, "model selection" is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • TQi 2.4GHz 5-channel micro receiver (TRA6518) with fail-safe security and integrated telemetry ports
    $639.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    HPI 104240 Savage Flux HP Brushless System RTR with 2.4 Radio
    $639.99

    The all-new Savage Flux HP is guaranteed to wow you and your friends! Powered by the high technology Flux Tork 2200 motor and twin battery packs, you will be pulling wheelies and getting air at the twitch of a finger! Easy plug-and-go convenience is the hallmark of electric RC vehicles like the Savage Flux HP. Just plug in two matching battery packs and you are off and running! The Flux Blur electronic speed control can handle massive amounts of power, and you can use up to 16 NiMH cells or 2 LiPo batteries (either 2S or 3S type). Want to hit the speed limit with your monster truck? The Savage Flux HP makes it easy! With twin 3S LiPo batteries and on-road tires like our #4729 or #4731 mounted Phaltlines the Savage Flux HP can achieve a blistering top speed of 62 mph.The Savage Flux HP is equipped with tough option parts to help it handle the power of the Flux Tork 2200 motor. We've equipped it with an all-metal gear transmission, steel spur gear, super heavy-duty dogbones, machine cut diff gears, 2.5mm TVP chassis plates, 3mm 7075 motor plate and dual 8mm billet motor clamps! The Savage Flux HP is based on the proven Savage X chassis, and features a low-mounted Flux Tork 2200Kv motor in place of the big-block nitro engine, a powerful Flux Blur electronic speed control in place of the fuel tank, and twin battery boxes to hold a variety of battery types. Power your Savage Flux HP with either NiMH batteries from 6- to 8-cell size, or dual LiPo batteries with 2S 7.4v or a whopping 3S 11.1v power! Proven features from the Savage X are carried over, including the tough all-metal gear drivetrain, powerful SF-5 metal-gear servo, machine-cut diff gears and legendary Savage suspension parts and shock towers for extreme durability! The lighter weight of the Savage Flux HP allows us to use one BIG BORE shock absorber on each corner for excellent control and traction on any surface.

    • All-Metal Transmission Gears - The Savage Flux HP features all-metal transmission gears to make sure that power delivery is uninterrupted and every jolt of power gets from the motor to the tires efficiently and with no worry of damage to the gears
    • Extra-Low CG - The Flux Tork 2200 motor sits extremely low in the chassis, providing as low a center of gravity (CG) as possible, and the twin battery packs ride on the outside of the TVP chassis for easy access
    • Flux Blur ESC - With the capacity to handle up to 6S LiPo power and more NiMH cells than can actually fit in the Savage Flux HP, the Flux Blur electronic speed control can take anything you can possibly throw at it and keep coming back for more!
    • Flux Tork 2200 Motor -The Flux Tork 2200 motor is one of the biggest and most powerful brushless motors available, and was selected specifically for its massive power delivery and voltage handling. It can take up to 25 volts of power, delivering hordes of power
    • Savage Wheelie Bar Incluced - The #85245 is included as standard, ready for you to bolt on in case you want to pull impressive wheelies
    • SF-5 High Torque Metal Gear Steering Servo - HPI designers chose a super-strong, extra-tough high torque metal gear servo. With nearly 9kg of force per centimeter (that's 126psi!), the SF-5 will get the GT-2 tires turning easily at any speed!
    • The reliable and sturdy HPI TF-3 radio controls the Savage Flux HP
    • Twin Battery Power - Brushless motors like the Flux Tork 2200 are already super powerful with just one battery compared to their older brushed ancestors, so you can imagine what two battery packs will be able to provide! The Savage Flux HP can take up to 16 NiMH cells (split up with 2 x 6-cell, 2 x 7-cell or 2 x 8-cell battery packs) or 2 LiPo packs of either 2S 7.4v or 3S 11.1v construction. The battery boxes feature vents to keep the batteries cool, and we suggest using official Deans zero-loss battery plugs.
    Product description
    HPI Savage XL K5.9 Nitro RTR
    $599.99

    This is the 2.4GHz radio controlled, glow powered, ready-to-run HPI Savage XL K5.9 Monster Truck. **The difference between this version and the #104246 **is that this version includes a glow starter w/battery,** **fuel bottle, 6-cell stick pack with charger, and six AA batteries,** **but does not offer a choice of body colors.** COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 5 6x13mm Transmission 3 DTXC1573 4 8x16mm Front Wheel Hubs 2 DTXC1585 4 8x16mm Rear Wheel Hubs 2 DTXC1585 2 5x10mm Clutch Bell 1 DTXC1535 4 10x16mm Differentials 2 HPIC2032 2 6x10mm Flanged, Transmission 1 DTXC1565 jxs 01/17/14 ir/jxs

    • Ball Bearings: Full set, rubber sealed
    • Battery Charger: Wall type charger
    • Battery: 7.2V stick pack with standard connector for Roto Start
    • Body: Painted and trimmed 0.60 (1.5mm) thick polycarbonate GT
    • Brake: Machined steel hub and dual red fiberglass brake discs
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car
    • Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12 (3mm) thick
    • Clutch Bell: Heavy duty steel construction, vented 16 tooth
    • Clutch: Three shoe aluminum
    • Differentials: Alloy cases with with machined steel rings and pinion bevel gears with new larger machined steel diff outdrives and axles
    • Drive: Four wheel shaft driven
    • Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and piston construction, three needle composite bodied slide valve carburetor with 9.5mm inlet, dual stage air filter, starts with included HPI Roto Start 2 shaft drive electric starter, one-piece engine mount and 0.12 (3mm) mounting plate
    • Exhaust: Polished aluminum two-chamber tuned pipe and polished aluminum manifold
    • Fuel Tank: 5.4oz (160cc), flip top cap
    • Gigante monster truck
    • Radio: HPI TF-20E 2.4GHz with steering and throttle trim and reverse and dual rate adjustment, transmitter does not have charge jack
    • Shocks: Eight long-stroke oil-filled
    • Slipper Clutch: Heavy duty dual slipper plates and shock absorbing rubber pad
    • Spur Gear: Machined steel 52 tooth
    • Steering servo: SF-50 Metal Gear Servo (HPIM2777)
    • Steering: Bell crank with cam-type servo saver steering arms
    • Suspension: Double wishbone with lightweight suspension arms
    • Throttle servo: SF-10 Servo 4.5kg-cm 6.0V (HPIM2784)
    • Tires: HPI Terra Pin with spike pattern for grass and loose dirt and center chevron pattern for directional stability, 7 (178mm) diameter, 3.35 (85mm) wide
    • Transmission: Three-speed with metal gears and adjustable shift point
    • Warranty Period: Two year limited, valid only in the US, Canada and
    • Wheels: Chrome plated 2.2 (56mm) wide with 17mm aluminum hex hubs, 3.4 (87mm) diameter
    Product description
    1/10 Slash 4x4 Ultimate RTR w/TSM
    $589.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/10 scale Traxxas Slash 4x4 Ultimate LCG Short Course Racing Truck with Traxxas Stability Management. COMMENTS: Available in the following color combinations; Gray #7, TRAD21EE Black and Red, TRAD21LR Gray and Black, TRAD21EL Red and Black, TRAD21RL Though the Traxxas Slash is available in race replica versions with officially licensed ProGraphix painted bodies, we are unable to honor specific requests. COMMENTS: The ball bearings in the Traxxas ULT LGC Slash 4x4 are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax: Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 jxs 09/29/15 ir/jxs

    • Ball Bearings: Rubber sealed
    • Battery Charger: 4-amp DC Peak Detecting Fast Charger
    • Battery: Traxxas Power Cell 8.4V 4200mAh NiMH with Traxxas high-current connector
    • Body: Painted and trimmed
    • Bumpers: Front and rear, composite construction
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: LGC (Low Center of Gravity) positions battery & electronics as deep as possible to positon weight low in the chassis, chassis is reinforced by integrated ribs forming a triangulated structure
    • Differentials: Revo-spec sealed silicone filled planetary gear type
    • Drive: Four wheel with lightweight extruded aluminum shaft
    • Electronic Speed Control: Traxxas VXL-3S waterproof, with high- current connector, training mode, reverse and low voltage detection for use with 2S and 3S LiPo packs
    • Motor: Traxxas Velineon 3500 with ultra high temperature
    • Neodymium magnets and high speed ball bearings
    • Pinion Gear: 13 tooth
    • Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic model recognition, telemetry enabled TSM receiver with dual channel 1 inputs, #6510 Docking Base (not included, must purchase TRAL6510) enables model to be tuned from an iPhone 3G/3GS/4/4S, or iPod Touch 2nd/3rd/4th generation (Traxxas Link App must be downloaded if wanting to use an iPhone or iPod Touch)
    • Shocks: Traxxas GTR, hard anodized aluminum body, PTFE-coated bores, titanium-nitride coated shafts, and X-ring seals
    • Spur Gear: 54 tooth, 0.8 module 32 pitch
    • Suspension: C-hub design, front and rear swaybars
    • Tires: Mud-Terrain, with foam inserts 1.7 (43mm) wide, 4.3 (109mm) diameter
    • Transmission: Ball bearing equipped with adjustable Torque-Control slipper clutch with finned aluminum alloy pressure plates
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Wheels: Beadlock style split spoke with chrome center and color molded outer rim to simulate beadlock, 12mm hex
    $589.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas Revo 3.3 4WD RTR Nitro Monster Truck w/TQi 2.4Ghz, Link Module & Batteries
    $554.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the glow powered, radio controlled, 1/10 scale 2.4GHz Traxxas Revo 3.3 Off-Road Ready-To-Run Monster Truck. COMMENTS The Revo 3.3 2.4GHz is available in the following colors and radio channels; Blue, TRAC83BB Red, TRAC83RR Green, TRAC83GG Silver, TRAC83SS NOTE: Black is the primary color on all of the bodies. The splash of color is around the cab only. All original bearings used in the Revo 3.3 2.4GHz are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117 2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117 4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115 4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115 2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115 1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119 2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117 1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118 2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115 1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119 1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117 1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115 2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117 2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611 jxs 11/14/14 ir/jxs

    • Ready-To-Drive® with included NiMH receiver pack and EZ-Start battery, 2-amp DC Peak Detecting Fast Charger, fuel-filler bottle, spare glow plug, precision tools, and more!
    • TQi™ 2.4GHz Transmitter with Traxxas Link Wireless Module and Receiver
    • Factory installed telemetry sensors - RPM, speed, temperature, and battery voltage
    • Wider, taller stance with new Geode™ wheels and 6.3" Maxx-sized tires
    • Sinister new body with ferocious graphics
    • Heavy-duty reversing transmission with exclusive OptiDrive® Electronic Shift Module
    • Dual digital waterproof ball-bearing servos with 250 oz.-in. combined torque
    $554.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated  80909 1/8 RC8.2 RS RTR 2.4GHz
    $534.99

    The RC8.2 has already proven itself a winner in many world class events such as the 1:8 scale off road R.O.A.R. National Championship, the Dirt Nitro Challenge, and the Silver State Nitro Challenge. With the RC8.2RS RTR, you can now have this high level of performance in a Race-Spec Ready-To-Run! The RC8.2RS RTR comes loaded with the performance features you have come to expect from the Race-Spec line. Features like the powerful Reedy .21VS pull start engine, a performance-tuned exhaust system and XP 2.4GHz radio system, just to name a few. The RC8.2RS RTR is the perfect way to get into the 1:8 scale nitro buggy class, and also has the benefit of having many Factory Team performance parts and upgrades already available!

    • Associated 1/8 RC8.2 RS Nitro 2.4GHz RTR
    Product description
    E-Revo Racing Truck RTR w/2.4GHz
    $529.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 1/10 scale Electric Powered, Radio Controlled, Traxxas E-Revo Racing RTR Monster Truck. BODY- Length: 19.9 (505mm) Width: 7.29 (185mm) at rear wheels (widest point) 6.7 (170mm) behind from wheels (thinnest point) Height: 4.9 (124mm) COMMENTS: The E-Revo 2.4GHz RTR is available in the following body colors: Blue, TRAC89BB Red, TRAC89RR Black, TRAC89LL Silver, TRAC89SS All original bearings used in the E-Revo are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm Fr Hubs 1 DTXC1597 1 TRAC5120 2 6x13mm Fr Hubs 1 DTXC1573 1 TRAC5180 2 12x18mm Rear Hubs 1 DTXC1597 1 TRAC5120 2 6x13mm Rear Hubs 1 DTXC1573 1 TRAC5180 2 10x15mm Differentials 1 DTXC1595 1 TRAC5119 2 8x16mm Differentials 1 DTXC1585 1 TRAC5118 4 6x12mm Differentials 2 DTXC1569 2 TRAC5117 4 5x11mm Transmission 2 DTXC1547 2 TRAC5116 2 6x12mm Transmission 2 DTXC1569 2 TRAC5117 jxs 04/03/15 ir/jxs

    • NEW 4amp DC Peak Detecting Fast Charger
    • NEW Traxxas 7-cell NiMH battery with iDTM
    • TQi 2.4GHz radio system
    • It will reach speeds of 30+ MPH
    $529.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated  80908  RC8.2E RS RTR
    $499.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the electric powered, radio controlled, 1/8 scale Ready to Run RC8.2E Off-Road Buggy from Team Associated. COMMENTS: Available in thew following body colors; Blue, ASCD19BB Red, ASCD19RR For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x16mm Front Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 2 8x16mm Rear Diff 1 DTXC1585 2 8x16mm Front Hubs 1 DTXC1585 2 15x21mm Front Hubs 1 DTXC1601 2 8x16mm Rear Bulkhead 1 DTXC1585 2 8x16mm Rear Hubs 1 DTXC1585 2 15x21mm Rear Hubs 1 DTXC1601 jxs 10/25/11 ir/jxs

    • Ball Bearings: Full set included
    • Body: Trimmed RC8e buggy body, painted in eith red or blue
    • Caster: Adjustable with caster blocks that adjust 14, 16, or 18¦ with molded inserts, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: 7075 hard anodized aluminum 0.14 (3.5mm) thick, with keyed lower suspension plates
    • Differentials: Planetary gear
    • Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center drives, 3.5mm light CVA drivetrain with full ball bearings
    • Electronic Speed Control: Waterproof XP SC1300-BL with Deans Ultra
    • Motor Mount:
    • Motor: Reedy 2000kV brushless
    • Plug connectors
    • Radio: XP 2.4GHz with high-torque S2008MG metal gear servo
    • Shock Towers: 7075 aluminum 0.12 (3mm) thick
    • Shocks: Oil-filled 16mm Big Bore, 6061 aluminum
    • Steering: Aluminum steering knuckles
    • Suspension: Updated RC8.2 racing suspension geometry
    • Tires: High traction knobby tread
    • Wheels: Dish type, white in color 17mm hex, 1.6 (49mm) wide, 3.3 (83mm) diameter
    $499.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    1/10 Slash 4x4 BL SC RTR w/On-Board Audio
    $489.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/10 scale Traxxas Slash 4x4 Short Course Racing Truck with Traxxas Stability Management and On-Board Audio. COMMENTS: The Slash 4x4 SC Truck is available in the following color schemes; Blue, TRAD34BB Black & Red #47, TRAD34LR Red & Black #25, TRAD34RL White, TRAD34WW The ball bearings in the Traxxas Slash 4x4 are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax - Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 jxs 04/27/15 ir/jxs

    • NEW Traxxas Stability ManagementTM (TSM)
    • NEW Traxxas On-Board Audio
    • NEW Low CG Chassis
    • Traxxas 4amp DC Peak Detecting Fast Charger
    • Traxxas 7-cell NiMH battery with iDTM
    • Powered by the Velineon® Brushless Power System
    • Slash 4X4 reaches speeds in excess of 60mph!*
    • TQi 2.4GHz transmitter
    $489.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Team Associated 20510 Rival Monster Truck RTR Brushless 2.4GHz
    $474.99

    The Rival comes ready to crush the competition with many high-performance features, including the XP 2.4GHz radio system, a Reedy brushless power system, and two 7-cell 8.4 volt Reedy WolfPack batteries wired with Deans Ultra Plug Connectors. The Rival Monster Truck features a super long travel independent suspension that is managed by eight fluid-filled, adjustable coil-over shocks, giving the Rival the ability to roll over just about anything in its path. Giant aggressive monster truck tires provide maximum traction, letting the Rival claw through the toughest terrain with ease. The 4WD drivetrain includes three sealed gear differentials that transfer the power with tough steel CVA drive shafts to both ends of the truck.

    • Reedy 1515-SL 2000kV brushless motor
    • XP 2.4GHz radio system, high torque DS1510MG metal gear servo, and water-resistant receiver box
    • 2 Reedy 7-cell/8.4V NiMH WolfPack batteries with Deans? Ultra Plugs? included
    • Factory-finished RIVAL monster truck style body
    • 3 gear differential drivetrain including a center differential for superior traction and performance
    • Big aggressive monster truck tires with bead-lock style wheels that use 1:8 scale type 17mm wheel hexes and locking wheel nuts
    • Ultra-rigid aluminum monster truck chassis
    • 8 adjustable fluid-filled shock absorbers
    • Durable, impact-absorbing bumpers front and rear
    • Tough 4mm steel wire roll bar protects the body and chassis during roll-overs and tumbles
    • Battery tray holds two 6- or 7-cell NiCd/NiMH or two 2S LiPo battery packs
    • 5mm heavy-duty adjustable alloy steel turnbuckles
    Product description
    HPI 109083 RTR Savage X 4.6 Nitro
    $464.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the glow powered, 2.4GHz radio controlled 1/8 scale, ready to run, Savage X 4.6 Monster Truck from HPI. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 4 8x16x5 FR & R gearboxes 2 DTXC1585 3 10x16x5 FR, CTR & R Diffs 2 HPIC2032 5 6x13x5 CTR gearbox 3 DTXC1573 1 8x16x5 CTR gearbox 1 DTXC1585 2 5x10x4 Clutch 1 HPIC0021 4 8x16x5 FR uprights (wheels) 2 DTXC1585 4 8x16x5 R uprights (wheels) 2 DTXC1585 jxs 02/04/14 ir/jxs

    • Body: Painted and trimmed GT-3
    • Brake: Dual heat resistant fiber discs
    • Bumpers: Composite construction
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation
    • Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
    • Clutch: Three shoe, heavy duty
    • Differentials: Planetary gear with aluminum alloy cases
    • Drive: Four wheel shaft drive with heavy duty dogbones
    • Electric Starter: Roto Start 2 with starter shaft, 7.2V 2000mAh battery pack and AC wall charger
    • Engine: HPI F4.6 with slide valve carburetor, ABC (Aluminum piston with a Brass sleeve that is Chrome plated), 8-port liner, 7.5mm slide valve composite body carburetor and dual stage air filter
    • Exhaust: Composite construction tuned pipe, black in color
    • Radio: 2.4GHz pistol grip with failsafe and waterproof servos
    • Receiver is RF-40 3-Channel 2.4GHz (HPIL5383)
    • Shocks: Four Big Bore, oil filled nylon body
    • Steering servo: SF-20W Servo (Waterproof/6.6kg-cm6.0V) (HPIM4109)
    • Steering: Bell crank
    • Throttle servo: SF-10W Servo (Waterproof/4.5kg-cm6.0V) (HPIM4105)
    • Tires: 3.4 (85.5mm) wide, 6.2 (159mm) diameter
    • Transmission: Two speed with adjustable shift points
    • Transmitter is TF-40 3-Channel 2.4GHz FHSS (HPIL5381)
    • Wheels: Black chrome Warlock 2.2 (56mm) wide, 3.3 (83mm) diameter with 17mm hex
    $464.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Kraton 6S Brushless 1/8 4WD Speed Monster RTR
    $459.99

    This is the Electric Powered, 2.4GHz Radio Controlled 1/8th scale, Ready to Run Kraton 6S BLX Speed Truck from ARRMA. **The Green version, ARAD81GG, and Blue version ARAD81BB were replaced by the** **Green and Black version, ARAD81GL arriving late April 2016.** COMMENTS: For replacement ball bearings use: Qty. Size Location Qty. Bearing Set 2 15x21mm F&R Inner Hubs 1 ARAC3162 2 8x16mm F&R Inner Hubs 1 ARAC3156 2 5x10mm Idler Gear 1 ARAC3200 2 5x10mm Input Shaft 1 ARAC3200 2 10x15mm Diff Gear 1 ARAC3202 6 8x16mm Fr, Ctr & R Diffs 3 ARAC3156 ajw 1-30-14 jAM 11/03/15 ir/jxs

    • 6S LiPo compatibility for extreme high speeds
    • Adjustable hook and loop battery straps for ease and security
    • Adjustable servo saver
    • Aluminum motor mount to keep the brushless moro running smooth and fast
    • Aluminum sero horns for fast, responsive steering
    • Assembled chassis
    • Finished trimmed body ATX100 2.4GHz radio ARRMA brushless motor
    • Race-proven roll bars, front and back, for professional race handling
    • Turnbuckle-tunable suspension
    • Waterproof radio box
    Product description
    1/10 Slash 4X4 4WD Electric SC RTR
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/10 scale Traxxas Slash 4x4 Short Course Racing Truck with TSM (Traxxas Stability Management). COMMENTS: Available in the following color schemes: TRAD52BB BLU #7 TRAD52LE BlacK/Gray #10 TRAD52LR BlacK/Red #47 TRAD52LS BlacK/Silver #7 TRAD52LW BlacK/White #1 TRAD52RL Red/Black #25 TRAD52RR Red #74 TRAD52SL Silver/Black #10 The ball bearings in the Traxxas Slash 4x4 are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax - Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 jxs 07/13/15 ir/jxs

    • NEW Traxxas Stability ManagementTM (TSM)
    • Slash 4X4 reaches speeds in excess of 60mph!*
    • Velineon VXL-3s Electronic Speed Control
    • Velineon 3500 Brushless Motor
    • TQi 2.4GHz transmitter
    • Traxxas 4amp DC Peak Detecting Fast Charger
    • Traxxas 7-cell NiMH battery with iDTM
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas T-Maxx 3.3 4WD RTR Nitro Monster Truck w/TQi, Docking Base & Telemetry
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 1/10 scale 2.4GHz radio controlled, nitro powered, Ready-To-Run Traxxas New T-Maxx 3.3 Monster Truck. Now includes the Traxxas Link Wireless Module. COMMENTS: Available in the following body colors; Blue, TRAD60BB Red, TRAD60RR Black, TRAD60LL White, TRAD60WW Most original Traxxas bearings used in the T-Maxx 3.3 are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: Duratrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm F Axle Pins 1 DTXC1597 1 TRAC5120 2 6x12mm F Axle Carriers 1 DTXC1569 1 TRAC5117 2 6x12mm F Diff 1 DTXC1569 1 TRAC5117 2 10x15mm F Diff 1 DTXC1595 1 TRAC5119 2 12x18mm R Axle Pins 1 DTXC1597 1 TRAC5120 2 6x12mm R Axle Carriers 1 DTXC1569 1 TRAC5117 2 6x12mm Output Gears 1 DTXC1569 1 TRAC5117 1 6x10mm NRB Output Shaft 1 TRAC5121 1 5x11mm Spur Gear 1 DTXC1547 1 TRAC5116 2 5x11mm Clutch 1 DTXC1547 1 TRAC5116 jxs 02/01/10 ir/jxs updt jxs 02/25/13

    • TQi 2.4GHz High Output radio system with Traxxas Link™ Wireless Module:
    • TQi 2.4GHz High Output transmitter
    • Traxxas Link™ Wireless Module
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, "model selection" is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • Telemetry-ready 5-channel micro receiver with dual channel-1 input
    • Traxxas Link Wireless Module compatible with Android 4.4 equipped devices, iPhone (4S, 5, 5C, 5S), iPod touch (5th generation and later versions), iPad (3rd generation and later versions), or iPad mini.
    • Factory installed speed, RPM, and temperature telemetry sensors
    • TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security and integrated telemetry ports
    • TRX® 3.3 Racing Engine:
    • Bigger piston and sleeve delivers extreme power
    • Consistent and smooth throughout the entire power band
    • Straight-through exhaust flow
    • Slide carburetor
    • TRX IPS crankshaft
    • Knife-edged connecting rod
    • Molded head protector screws onto the cooling head
    • Large aluminum blue-anodized cooling head
    • High-volume air filter
    • Super-light piston and rod
    • High-performance ball bearings
    • Backed by Traxxas Lifetime Engine Replacement Plan
    • Traxxas Resonator Tuned Pipe:
    • Double chamber design maximizes low to mid rpm horsepower
    • Laser etched, polished aluminum finish
    • Long wheelbase chassis increases stability:
    • Chassis extended by 30mm
    • 4mm thick 6061-T6 aluminum chassis
    • Lower skid plate protects the center driveline while allowing quick access to the transmission
    • Tunable sealed differentials in Maxx® differential housings:
    • Strengthened differential housings
    • Differential uses Revo®-Spec gears and components
    • Gray composite components:
    • Heady-duty front, rear, and center skid plates
    • Reinforced front and rear bulkheads
    • Ultra shock bodies
    • Revo-Spec state-of-the-art transmission:
    • Auto-shifting, two-speed transmission is simple, reliable, and easy to adjust
    • Ultra-compact, fewer moving parts
    • Low rotating mass for quick, high-revving acceleration
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    1/10 Rally 4WD Elec BL RTR w/Stability
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 1/10 scale, Brushless Electric Powered, 2.4GHz TQi Radio Controlled Ready to Run Rally Race Car from Traxxas. with Traxxas Stability Management. COMMENTS: Available in the following color combinations; Blue, TRAD53BB Orange, TRAD53NN Green, TRAD53GG Red, TRAD53RR jxs 11/05/15 ir/jxs

    • Allows driver to view real time telemetry with optional sensors (telemetry sensors, and IPhone, iPad, iPad Mini and iPod touch not included)
    • Ball Bearings: Rubber sealed
    • Battery Charger: 110V AC wall type
    • Battery: 7-cell 8.4V 3000mAh NiMH Power Cell stick pack with Traxxas
    • Body: Traxxas ProGraphix painted and trimmed
    • Bumper: Front foam
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Fiber composite construction, low CG configuration
    • Differential: Hardened steel bevel, sealed, limited slip
    • Drive: Four wheel shaft, with blue anodized aluminum driveshaft, and telescoping U-joints
    • Electronic Speed Control: Velineon VXL-3w, waterproof, LiPo compatible
    • High-Current connector
    • Module is compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini
    • Motor: Velineon 3500kV brushless
    • Radio: Traxxas TQi 2.4GHz high output, compatible with Traxxas Link
    • Shocks: Oil-filled Ultra
    • Slipper Clutch: Patented Torque-Control
    • Steering Servo: Digital high-torque, ball bearing, waterproof
    • Steering: Bellcrank type with integrated servo saver
    • Suspension: Long travel design
    • Tires: Licensed BF Goodrich Rally Gravel, 4.02 (102mm) diameter
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Wheels: 2.2 (56mm) 12 spoke rally replica with 12mm hexes and the same offset as Slash 4x4 wheels
    • Wireless Module (not included, sold separately-TRAC6511)
    $449.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas E-Maxx RTR 4WD Monster Truck w/2.4GHz TQi, Link Module & Two Batteries
    $439.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the Traxxas E-Maxx RTR Monster Truck, with an included Link Enabled 2.4GHz TQi Radio System, two 8.4V 7-Cell NiMH Batteries and DC Battery Charger. This kit comes equipped with Traxxas iD Connectors as standard equipment.

    • TQi 2.4GHz Transmitter and Receiver
    • Traxxas Power Cell Batteries Included!
    • Waterproof electronics
    • Waterproof servos & ESC
    • Single speed transmission (Two-Speed optional)
    • Revo-Spec sealed pivot ball suspension
    • Revo-Spec sealed differentials
    • Revo-Spec sealed outer and center driveshafts
    • Low-CG chassis design
    • Stronger chassis braces
    • Tough transmission skid plate
    • Scaleable battery compartments
    • Snap-lock battery hold downs
    • Dual-servo steering system
    • Integrated servo saver
    • Hex hardware throughout
    • 3.8" mirror chrome Twin-Spoke wheels
    • 3.8" Maxx chevron tires
    $439.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas RTR Slayer 4WD RC vehicle
    $429.99

    This is the glow powered, 2.4GHz radio controlled, Traxxas Slayer Pro 4WD Short Course Race Truck. **The included TQi 2.4GHz radio system is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** COMMENTS: The Slayer Pro 2.4GHz is available in the following body colors; Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL Red/Black #25, TRAD39RL Silver #10, TRAD39SS All original bearings used in the Slayer Pro are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117 2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117 4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115 4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115 2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115 1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115 1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114 1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119 2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117 1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118 2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115 1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119 1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117 1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115 2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117 2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611 jxs 01/03/13 ir/jxs

    • Authentic Pro 4X4 Action in a Nitro Powered Short-Course Race Truck
    • TQi 2.4GHz Transmitter and Receiver
    • Officially licensed Race Replica bodies
    • Includes EZ-Start Battery and 2-amp DC Peak Detecting Fast Charger
    • 4-Wheel Drive
    • 50+mph
    Product description
    HELION SELECT FOUR 120SC SC TRUCK
    $429.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    Engineered from the ground up, Helion engineers ensured that the handling meets the highest expectations with 4-wheel independent suspension and fully adjustable, oil-filled threaded aluminum shocks soaking up even the worst terrain. Like tuning? So do we — tune the suspension geometry to the feel you want with adjustable shock mounting, turnbuckles and included swaybars. Added to this is a full complement of rubber sealed ball bearings, heavy-duty telescoping drive shafts, industry-standard 12mm wheel hexes

    • 100% factory-assembled and ready to run.
    • New high ground clearance chassis design for all-terrain versatility.
    • Front and rear anti-roll bars
    • 2s or 3S Li-Po compatible.
    • Reaktor 60-4T brushless power system.
    • Shaft based 4x4 drivetrain.
    • Modular chassis design for easy maintenance.
    • Planetary metal gear differentials with metal ring ring and pinion.
    • Four wheel independent suspension.
    • Rubber sealed ball bearings throughout.
    • Impact resistant composites are strong, durable, and lightweight.
    • All-weather electronics.
    • High traction tires.
    • Aluminum shock tower and wheel hexes.
    • Aluminium threaded, adjustable, oil filled, coil-over shock absorbers.
    $429.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM
    $421.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the glow powered, 2.4GHz radio controlled, Traxxas Slayer Pro 4WD Short Course Race Truck with Traxxas Stability Management. **The included TQi 2.4GHz radio system is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** COMMENTS: The Slayer Pro 2.4GHz is available in the following body colors; Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL Red/Black #25, TRAD39RL Silver #10, TRAD39SS All original bearings used in the Slayer Pro are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117 2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117 4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115 4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115 2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115 1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115 1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114 1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119 2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117 1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118 2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115 1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119 1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117 1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115 2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117 2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611 jxs 01/03/13 ir/jxs

    • Ball Bearings: Full set included, rubber sealed bearings used in all exposed locations
    • Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
    • Brakes: Alloy calipers, giant 1.6 (40mm) diameter drilled and vented steel rotor and semi-metallic friction material
    • Bumpers: Flexible molded front and rear tube style
    • Bumpers: Front and rear, plastic construction
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis and engine are warranted free from defects at the date ofpurchase before use.
    • Chassis: Titanium anodized 6061-T6 aluminum 1/8 (3mm) thick 3D semi-monocoque with integrated roll hoop and carry handle
    • Clutch: Two shoe composite construction
    • Differentials: Maintenance free, sealed with silicone X-rings and gaskets, limited slip action can be tuned using different viscosity oil
    • Drive Type: Shaft driven, shafts are .71 (18mm) diameter with half shafts and rubber shielded stub axle bearings
    • Drive: Four wheel
    • Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve carburetor and high flow dual stage air filter with 60% more peak horsepower than the TRX 2.5 engine, EZ-Start electric starter and 7.2V battery
    • Exhaust: Polished resonator dual chamber aluminum tuned pipe
    • Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
    • Gearbox: Sealed front and rear
    • Main Gear: 38 tooth, molded plastic
    • Module (not included, order TRAC6511) that turns an Android, iPad, iPhone or iPod Touch (sold separately) into a powerful tuning tool
    • Radio: Traxxas TQi 2.4GHz high output with digital ball bearing steering servo, may be equipped with the Traxxas Link Wireless
    • Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled hard anodized bodies with TiN shafts
    • Steering: Ball bearing enhanced with twin high-torque servos driving a heavy-duty servo saver
    • Suspension: Linkage based for long travel and precise tuning adjustments and control
    • Suspension: Variable progressive two rocker design, suspension travel not limited to length of shocks, ride height, suspension travel and progressive rate can be adjusted totally independent of each other, rubber sealed pivot balls can be adjusted with included tool without removing seals, steel pivot ball retaining rings
    • Tires: BF Goodrich Multi terrain, soft compound rubber 1.6 (42mm) wide, 4.3 (109mm) diameter with foam inserts
    • Transmission: Auto shifting wide ratio two speed, forward only
    • Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow.
    • TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
    • Warranty: 30 day warranty on electronic components
    • Wheels: Beadlock design 5-spoke satin chrome finish, 2.2 (56mm) outer diameter, 3 (76mm) inner diameter, 1.6 (41mm) wide
    $421.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Traxxas Nitro 4-Tec 3.3 1/10 RTR Nitro Sedan w/TQi 2.4GHz, Docking Base & TRX 3.3 Engine
    $414.99

    This is the 2.4GHz TQi radio controlled, glow powered, ready to run Traxxas Nitro 4-Tec 3.3 On-road Touring Coupe. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 5x11mm Fr Wheels 2 DTXC1547 4 5x11mm Rear Wheels 2 DTXC1547 2 10x15mm Rear Diff 1 DTXC1595 2 5x8mm Steering Bellcrank 1 DTXC1523 2 10x15mm Transmission 1 DTXC1595 2 5x11mm Transmission 1 DTXC1547 1 10x19mm Gear Hub 1 5x11mm Gear Hub 1 DTXC1547 2 5x11mm Fr Pulley Shaft 1 DTXC1547 2 10x15mm Diff Housing 1 DTXC1595 2 5x10mm Clutch 1 DTXC1535 Available in the following body colors, BLue, TRAC61BB Red, TRAC61RR Black, TRAC61LL White, TRAC61WW jxs 12/05/14 ir/jxs

    • Powered by the Velineon™ Brushless Power System
    • Traxxas High-Current Connector allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System
    • Maxx® Cable 12-gauge wire
    • Velineon VXL-3S Electronic Speed Control
    • * LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection
    • * Auto-detects brushed, sensorless and sensored brushless motors
    • * Sport Mode – Forward / Brake / Reverse
    • * Race Mode – Forward / Brake
    • * Training Mode™ - 50% Forward / Brake / 50% Reverse
    • Velineon 3500 Brushless Motor
    •  * Low-maintenance, unique Traxxas design
    • * Efficient, high-speed ball bearings
    • * Precision-balanced rotor
    • Durable steel Jato®-Style turnbuckles and captured rod ends
    • Efficient Magnum 272™ steel-gear transmission with ball bearings
    • Sealed gearbox protects the transmission with beefed up motor guard for extra protection
    • Revo®-Spec Torque-Control™ slipper clutch system
    • External gear cover with easy slipper access
    • Reliable composite planetary gear differential
    • Updated heavy-duty telescoping U-joint driveshafts and yokes
    • Fiber-composite monocoque chassis
    • New gray chassis components offer a fresh new look
    • Digital high-torque Traxxas 2070 steering servo
    • Speed control and receiver are securely fastened to chassis
    • Easy access battery compartment
    • Fully adjustable Ultra Shocks™ with X-ring technology
    • White powder coated shock springs feature a responsive spring rate
    Product description
    Traxxas Jato 3.3 2WD RTR Nitro Stadium Truck w/TQi 2.4GHz Radio, Telemetry, Easy Start & Charger
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the 2.4GHz radio controlled, glow powered, 1/10 scale, Ready-To-Run Traxxas Jato 3.3 Stadium Truck with Bluetooth Connectivity. **Does not include Docking Base** New features different from the 2.5 Jato include; 3.3 Racing Engine Resonator Blue Anodized Aluminum Tuned Pipe 2.8 (71mm) wide Anaconda Performance Tires Front Blue TRAD70BB Red/Yellow, TRAD70RY Red, TRAD70RR Yellow, TRAD70YY For replacement bearings order: Qty. Size Location Qty Bearing Set 4 5x11mm F.wheels 2 DTXC1553 2 5x11mm R.wheels 1 DTXC1553 2 10x15mm R.wheels 1 DTXC1595 5 5x11mm Transmission 3 DTXC1553 3 10x15mm Transmission 2 DTXC1595 *Optional 4 4x7mm Steering 2 DTXC1507 *Optional 2 5x8mm Brake Bellcrank 1 DTXC1523 jxs 03/01/10 ir/jxs updt jxs 03/13/13

    • Best-in-class acceleration, 0-60mph in less than 4.2 seconds!
    • Best-in-class top speed, 65+ mph!
    • The TRX 3.3 Racing Engine provides extreme power, brutal speed, and furious wheelie action.
    • TQi™ 2.4GHz radio system with Traxxas Link™ Wireless Module
    • TQi 2.4GHz High Output transmitter
    • Traxxas Link™ Wireless Module
    • Factory installed speed, RPM, and temperature telemetry sensors
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, "model selection" is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security and integrated telemetry ports
    • Front & rear sway bars provide superior handling and stability.
    • Super-sticky 2.8-inch Anaconda™ performance tires deliver asphalt-hugging street traction.
    • So fast, that the included wheelie bar is mandatory.
    • Incredible body graphics match the performance and speed of Jato 3.3.
    • Best in class suspension travel, 12mm more than other 2WD racing trucks!
    • Adjustable internal two-speed allows unmatched acceleration and top speed without compromise.
    • Sealed gearbox protects the two-speed and other sensitive transmission components from dirt and rocks.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Vaterra 1986 Chevrolet K-5 Blazer Ascender 1:10 4WD RTR RC vechicle
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This 4WD juggernaut is based on the Vaterra Ascender chassis an incredibly scale off-road platform that is engineered for extreme off-road environments. It comes completely assembled and equipped with waterproof electronics so you can drive it anywhere a full-scale off-road truck would go. Stamped-Steel Ladder Frames with Adjustable Wheelbase Steel, C-channel frames form the backbone of the Ascender chassis and give you four wheelbase lengths to choose from: 12.36 in (314mm), 11.9 in (302mm), 11.4 in (290mm) and 10.95 in (278mm). Markings on the frames make adjustment easy. Heavy Duty Suspension The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Bumpers and Rock Slider Side Bars The front and rear bumpers feature molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the side bars and bumpers can be moved to accommodate most of them. Heavy Duty CV Front Shafts As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle more than most other trucks in this class. Licensed 1986 Chevrolet K-5 Blazer Body The painted, polycarbonate body is modeled after one of the most popular K-5 Blazers ever built. Scale touches include an injection-molded grille with headlight details and authentic Chevrolet badging. A set of detail stickers is also included. Sticky Compound Interco Super Swamper Tires The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle. Powerful Dynamite Crawler Motor The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush. Waterproof Electronics The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect. Spektrum DX2E 2.4GHz Radio System The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.

    • 3-Link Panhard Bar Front Suspension
    • 4-Length Adjustable Wheelbase
    • 4-Link Rear Suspension
    • Adjustable Rock Slider Side Bars
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Bumpers
    • Dynamite brushed 35T crawler motor and waterproof ESC
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Licensed 1986 Chevrolet K-5 Blazer Body
    • Licensed Interco 1.9 Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic Axle Housings
    • Single-Speed, Metal Gear Transmission
    • Spektrum DX2E 2.4GHz radio system with batteries
    • Spektrum metal gear steering servo
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    1/10 Slash 2WD BL SC RTR w/On-Board Audio
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/10 scale Traxxas Slash VXL Low CG Short Course Racing Truck with Traxxas Stability Management and On-Board Audio. COMMENTS: The 2WD Traxxas Slash VXL is available in the following body color schemes; Blue, TRAD32BB Black Qty. Size Location Qty Bearing Set Qty Bearing Set 4 5x11mm Steering Blocks 2 DTXC1547 2 TRAC5116 4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116 4 5x11mm Transmission 2 DTXC1547 2 TRAC5116 1 5x11mm Slipper Clutch 1 DTXC1547 1 TRAC5116 4 5x8mm Steering Bellcrank 2 DTXC1523 2 TRAC6728 jxs 04/27/15 ir/jxs

    • NEW! Traxxas Stability Management (TSM)
    • NEW! Low-CG Chassis
    • NEW! Traxxas On-Board Audio System
    • Traxxas 4-amp DC Peak Detecting Fast Charger
    • Traxxas 7-cell NiMH battery with iDTM
    • Powered by the Velineon® Brushless Power System
    • TQi 2.4GHz transmitter
    • The Slash VXL reaches speeds in excess of 40mph using the included optional pinion gear*
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    The first-generation Ford Bronco was one-of-a-kind featuring a unique chassis engineered to boldly drive beyond the pavement. That same off-road spirit inspired this licensed 1/10-scale recreation of the 72 Bronco.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    The brainchild of the same visionaries behind the Mustang, the first generation Bronco featured a unique chassis engineered to drive boldly where the pavement ends. You ll find that same spirit of off-road adventure in this licensed, 1/10-scale recreation of the 72 Bronco. Its proven Ascender chassis features stamped-steel ladder frames, over 45 of steering travel and one of the most capable off-road suspensions available. Heavy Duty Suspension The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Front Bumper Front bumper features molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the bumper can be moved to accommodate most of them. Heavy Duty CV Front Shafts As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle more than most other trucks in this class. Licensed 1972 Ford Bronco Body The painted, polycarbonate body is modeled after one of the most popular early editions of the Ford Bronco ever built. Scale touches include an injection-molded grille with headlight details and authentic Ford badging. Sticky Compound Interco Super Swamper Tires The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle. Powerful Dynamite Crawler Motor The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush. Waterproof Electronics The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect. Spektrum DX2E 2.4GHz Radio System The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.

    • 3-Link Panhard Bar Front Suspension
    • 4-Link Rear Suspension
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Front Bumper
    • Dynamite brushed 35T crawler motor and waterproof ESC
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Licensed 1972 Ford Bronco Body
    • Licensed Interco 1.9 Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic Axle Housings
    • Single-Speed, Metal Gear Transmission
    • Spektrum DX2E 2.4GHz radio system with batteries
    • Spektrum metal gear steering servo
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    The first-generation Ford Bronco was one-of-a-kind featuring a unique chassis engineered to boldly drive beyond the pavement. That same off-road spirit inspired this licensed 1/10-scale recreation of the 72 Bronco.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    The brainchild of the same visionaries behind the Mustang, the first generation Bronco featured a unique chassis engineered to drive boldly where the pavement ends. You ll find that same spirit of off-road adventure in this licensed, 1/10-scale recreation of the 72 Bronco. Its proven Ascender chassis features stamped-steel ladder frames, over 45 of steering travel and one of the most capable off-road suspensions available. Heavy Duty Suspension The chassis rides on a 3-link panhard bar front suspension and a 4-link rear suspension. All suspension links are machined from aluminum to handle the most punishing conditions. Oil-filled, threaded shocks soak up the bumps and give you a variety of pre-load settings. Metal Gear Transmission The single-speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two-speed transmission, sold separately. Floating Battery Tray The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tires extra traction when crawling over rocks and tackling steep inclines. Crawler Style Front Bumper Front bumper features molded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10-scale bodies later on, the bumper can be moved to accommodate most of them. Heavy Duty CV Front Shafts As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle more than most other trucks in this class. Licensed 1972 Ford Bronco Body The painted, polycarbonate body is modeled after one of the most popular early editions of the Ford Bronco ever built. Scale touches include an injection-molded grille with headlight details and authentic Ford badging. Sticky Compound Interco Super Swamper Tires The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper tires. Like the full-scale versions, their tread pattern and compound provide excellent grip at almost any angle. Powerful Dynamite Crawler Motor The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush. Waterproof Electronics The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect. Spektrum DX2E 2.4GHz Radio System The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.

    • 3-Link Panhard Bar Front Suspension
    • 4-Link Rear Suspension
    • Aluminum Suspension Links
    • Ascender Stamped-Steel Ladder-Frame Chassis
    • Crawler Style Front Bumper
    • Dynamite brushed 35T crawler motor and waterproof ESC
    • Floating Battery Tray
    • Heavy Duty CV Front Shafts
    • Licensed 1972 Ford Bronco Body
    • Licensed Interco 1.9 Super Swamper Tires
    • Oil-Filled, Threaded Shocks
    • One-Piece, Low-Profile Locker/Ring Gear
    • Realistic Axle Housings
    • Single-Speed, Metal Gear Transmission
    • Spektrum DX2E 2.4GHz radio system with batteries
    • Spektrum metal gear steering servo
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty:
    Product description
    Axial  AX90018  1/10 Wraith Rock Racer Electric 4WD RTR
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup

    This is the radio controlled, electric powered, ready to run, 1/10 scale Wraith Rock Racer from Axial. jxs 04/18/11 ir/jxs updated tlc 6/11/14

    • 2.4GHz Radio System
    • Lighting 6 LED's with Extra Light Buckets
    • AE-2 ESC with Drag Brake
    • AR60 OCP-Axle (Off Center Pumpkin Design): True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
    • Optimized Steering Geometry: The front axle steering geometry is engineered for high speed performance with close attention to maximum pivot angle, minimal scrub, adjustable caster and Ackerman set as close to 0-degrees as possible. This geometry theory achieves a desired tight turning radius with locked differentials and better steering control at high speeds.
    • Corbeau® LG1 Licensed Race Seats: Fully licensed Corbeau® LG1 race seats add to the scale realism of the already highly detailed interior set.
    • Rebel Wheels and Ripsaw Tires: Ripsaw tires are mounted and pre-glued to 8-spoke Rebel Wheels right from the factory. The Axial 2.2 Ripsaw Tires are a realistic looking tire for the image-conscious scale crawler, but will also help to improve performance with an aggressive tread design, the sticky R35 compound and great ground clearance. The Ripsaw measures 5.5" [140mm] in diameter. This gives the lowest point on the 4X4 axle housing more clearance thus giving you more tactical driving options in those sticky predicaments! The Rebel wheels are made from a strong composite material which is both lightweight and durable.
    $399.99
    Add to Cart
    $4.99 Flat Rate Shipping or FREE In-Store Pickup
    Qty: