This amazing bit of Spektrum technology is perfect for ultra micro aircraft. It combines an FPV camera, transmitter and antenna into a single unit no bigger than a thimble. It s compatible with Fat Shark and other popular FPV headsets equipped with analog 5.8GHz receivers. Installation is easy and can be done in seconds. No soldering or special skills are required. You simply attach it to your model and plug in a 1S battery (sold separately). A Y-harness connector is included if you want to eliminate the weight of a separate battery and power the camera with the same 1S flight battery that powers the aircraft. Digital Head Tracking Available Even though the VA1100 is a fixed-position camera, you can pan and tilt your field of view when you use it with a compatible FPV headset that features digital head tracking technology. Special sensors and software in these headsets allow you to look around the environment your model is flying through without the need for a gimbal camera mount. It s just one more way Spektrum FPV technology lets you have more fun with fewer hassles.
You don t have to be a master modeler to add the realism of functioning retracts to your airplane. The completely self-contained E-flite retract system requires no air tank, complex linkages or extra servo. It can simply be bolted into place and plugged into the receiver. A specially-designed Y-harness is included that allows for the use of a single receiver channel to control all retract units.
Add the realism of functioning retracts to your 10- to 15-sized airplanes. E-flite's completely self-contained retract systems require no air tanks, complex linkages, or even extra servos. They simply need to be bolted into place and plugged into the receiver. A specially designed Y-harness is also included, allowing pilots to use a single receiver channel to control all retract units.
Add the realism of functioning retracts to your 10- to 15-sized airplanes. E-flite's completely self-contained retract systems require no air tanks, complex linkages, or even extra servos. They simply need to be bolted into place and plugged into the receiver. A specially designed Y-harness is also included, allowing pilots to use a single receiver channel to control all retract units. Specifically designed for the Parkzone Fw-190A-8, the retracts feature aluminum trunnions and 4mm struts to handle the loads of the long Fw-190 landing gear legs.
350 Wing Set with Decals for the Ares Decathlon 350
Fuselage Set with Decals for the Ares Decathlon 350
Painted Bare Fuselage: T-28
Ares P-51D Mustang 350 Fuselage Set with Decals
Hardware package included. Contains aileron control horns and control rods with clevis.
Ares P-51D Mustang 350 Wingset with Decals
Bare Fuselage (no electronics or decals): CUB, SC LP
Fuselage Set: G370
Aileron Aerobatic Wing Set: G370
This is the Great Planes ElectriFly Power System Brushless Motor Mount. This attaches to the firewall and the electric motor attaches to this mount. rmb 12-20-06 ir/jxs updt jxs 02/29/12
If you have progressed past the teach-yourself-to-fly stage and are looking to add even more excitement to your RC flight experience, the Super Cub float set is the perfect option. This lightweight, Z-Foam float set includes a larger prop (10x8) to maximize the performance of the Cub on floats. These floats are a Zone 3 product, and are not recommended for beginners due to the difficulty of flying off of water.
Plug in the Sonic Combat Module and take on similarly equipped HobbyZone planes in aerial combat. When hit , the SCM temporarily disables your opponent s motor for three seconds while still allowing them to steer. The Sonic Combat Module is compatible with any X-Port equipped HobbyZone airplane, like the Firebird Commander, Aerobird Challenger, and Aerobird Xtreme.The Sonic Combat Module also works with X-Port equipped ParkZone Aircraft such as the F-27 Stryker, and Slo-V.
Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.
Plug in the Aerial Drop Module and you can drop streamer bombs or a parachute, all of which are included. The Aerial Drop Module is compatible with any X-Port equipped HobbyZone airplane, like the Firebird Commander, Aerobird Challenger, and Aerobird Xtreme. It also works with the ParkZone Slo-V.
Horizontal Tail with Decals for the Ares Decathlon 350
Ares P-51D Mustang 350 Horizontal Stabilizer/Tail
The UMX Carbon Cub SS float set is a great option that adds even more excitement to your RC flight experience. This lightweight, molded-foam float set includes everything needed to complete the floatplane conversion. Assembly and installation take only minutes. The rugged wire struts assure the proper stance on the water for smooth tracking and easy takeoffs from the water.
Standard Wing with Struts: Cub.
Standard Wing Set: G370
Bulk Swivel Ball Links, 2-56
DU-BRO Dual Swivel Ball Links are ideal for rudder/tailwheel, aileron, or any multiple control hook-up.
Tail Set Apprentice S 15E RTF
MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1205) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4105 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl