• Paints & Tools

  • Showing: 1 - 30 of 2084
    Sort by:
    Product description
    Iwata-Medea Hp-Cs Eclipse Airbrush

    This multi-purpose, high-paint-flow, high-detail Eclipse Series airbrush covers a wide range of uses. Commonly used to spray premixed or heavier paints, it is well suited for uses demanding precise control of spray when applying moderate-to-large amounts of paint to a variety of surfaces and to various-sized areas. This Eclipse Series brush has established a new benchmark for excellence in an all-purpose airbrush.

    • Automotive artists, fine artists and students will appreciate how well the Eclipse CS sprays heavier acrylics and Medea Textile Colors, while maintaining high-detail spray characteristics
    • Generous 1/3 oz. sized cup is designed with a new funnel shape, which makes for easy clean up and more efficient paint flow
    • Gravity-feed airbrush features a unique 0.35-mm needle and nozzle combination for fine-detail spraying, but with high-paint-flow capacity
    $174.09
    Add to Cart
    Qty:
    Product description
    Hobbico Mini Air Compressor w/Regulator & Filter

    This is the CP101A Mini Air Compressor with Regulator from Model Maker. COMMENTS: Adapters needed: -Regulator to 5mm , use HCAR4105 -Regulator to 1/8, use HCAR4106 NNA 12/29/04 ir/jxs

    • All moving parts use sealed oil-less bearings
    • Cushioned handle
    • Durable cast aluminum body
    • Maintenance-free operation
    • Manual ON/OFF switch
    • Quiet diaphragm-type compact design
    • Suitable for use with all airbrushes
    $139.99
    Add to Cart
    Qty:
    Product description
    Paasche 1/8 HP D500 Compressor with the R-75 pressure regulator.

    A 1/8 HP compressor with switch and regulator is economical and suitable for all airbrushes. It is capable of delivering 20-40 PSI depending on airbrush being used. The Paasche D500 is an oil-less piston compressor. The R-75 is a low pressure regulator with a 100 psi gauge and moisture drain. This regulator gives control of operating pressure as well as assisting in furnishing clean, dry and regulated air.

    • Operates on 110-120 Volt, 1 phase, 60Hz, and delivers .4 C.F.M. @ 20 P.S.I
    • R75 Regulator will regulate up to 40 P.S.I. depending on usage and size of airbrush being used
    $129.99
    Add to Cart
    Qty:
    Product description
    Trakpower TK955 Digital Solder Station

    This is the TrakPower TK955 Digital Solder Station. jxs 10/06/14 ir/jxs

    • Digital LED display shows selected temperature, heating status and operational alerts
    • Five year limited warranty on the base unit, and one year limitedwarranty on the iron handle from date of purchase.
    • Holds selected temperature within 1.8¦F (1¦C) while idle
    • Push button controls adjust heat in precise 1¦ increments
    • Security key locks in selected temperature, preventing accidental changes
    • This warranty does not cover damage caused by abuse, misuse, alteration oraccident.
    $109.99
    Add to Cart
    Qty:
    Product description
    Paasche Deluxe Extra Fine Airbrush Set (VL-SET)

    No other airbrush can offer more versatility than the VL model. This model can achieve spray patterns from fine detail to broader coverage, handling light, medium and heavy fluids. Fluids are siphon fed from a Color Cup or a Bottle Assembly. The VL has a Tapered Socket for securing Bottle or Cup. Suitable for both left or right-handed users.Airbrush Set Includes:One VL#3 Double-Action AirbrushSize 1 5 spray headsHead Protecting CapOne 1/4 oz. Metal Color CupOne 1 oz. Color Bottle AssemblyOne 1 oz. Bottle and Cover AssemblyOne 6 foot Air HoseHangerWrench"22 Airbrush Lessons" Booklet

    $94.99
    Add to Cart
    Qty:
    Product description
    Badger Airbrush Deluxe Airbrush Kit Medium

    Universal Head Siphon Bottom Feed Deluxe Airbrush Set

    • Non-slip, one-piece trigger
    • PTFE head seal assures efficient air flow
    • Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear
    $79.99
    Add to Cart
    Qty:
    Product description
    TrakPower TK950 Soldering Station

    This is the TK950 Soldering Station from TrakPower. jxs 06/01/11 ir/jxs

    • Heavy-duty 60 watt design for years of reliable performance
    • Heats quickly to selected temperature within a range of 392deg - 896deg F and holds setting within 1.8deg F when idle
    $79.99
    Add to Cart
    Qty:
    Product description
    Weller/Cooper Tools Solder Station, 40W 120V

    Temperature Range: 900 F Voltage Input/Output: 120 V/120 V Wattage: 5 W - 40 W

    • Cushioned foam grip with replaceable heating element
    • Ideal for hobbyist, DIY ers and students
    • Includes ST3 iron plated copper tip
    • Natural sponge tip cleaning pad
    • On/off switch with "power-on" indicator light
    • Quality lightweight pencil iron
    • Safety guard iron holder
    • UL listed, cUL version available
    • Variable power control produces 5-40 watts
    $74.99
    Add to Cart
    Qty:
    Product description
    Paasche Model H Single-Action Airbrush

    Sturdy and flexible, the Model H Single-Action airbrush is recommended for all skill levels. It has a tapered socket for securing a Bottle Assembly or a Color Cup. Suitable for both left and right-handed users.Set Includes:One H#1 Single-Action AirbrushSizes 3 5 Color Adjusting Parts and AircapsOne 1/4 oz. Metal Color CupOne 1 oz. Color Bottle AssemblyOne 1 oz. Bottle and Cover AssemblyOne 6 foot Air HoseTwo WrenchesHanger"22 Airbrush Lessons" Booklet

    $74.99
    Add to Cart
    Qty:
    Product description
    Donegan Optical OptiVisor

    OptiVISOR is a precision binocular headband magnifier which permits unrestricted efficiency while reducing eye strain, leaves both hands free, and allows three dimensional vision. Used by anyone whose profession or craft requires close accurate work. Can be worn over prescription or safety eyeglasses.

    • Adjustable Headband conforms to fit all head sizes
    • Adjustable pivots allow the visor to be tilted out of the way when not needed and at your fingertips when you need magnification
    • Bevel-edged lenses mounted in an interchangeable plastic frame
    • Genuine Leather Comfort Band is padded with orthopedic felt, adding to the visor's comfort
    • Headband is fabricated from a special blend lightweight material that is always comfortable, even when being worn for long periods of time
    • High Impact Visor provides a tough, durable, always new appearance
    • Lens provides 2.50x magnification at a focal length of 8 inches
    • Optical Glass Prismatic Lenses are ground and polished to precision optical standards
    $54.99
    Add to Cart
    Qty:
    Product description
    Badger Medium Head Single Action Bottom Feed Airbrush Set

    Airbrushes -- Model 350 Airbrush Basic Set w/Accessories & Propel - Medium

    • Color cup and one-piece jar adaptor taper-fit for quick color changes
    • Constructed of high-impact nylon
    • Excellent for more volumous spray projects
    • Nozzles/needles made of precision manufactured metals
    • Solvent and chemical resistant
    • Sprays higher viscosity materials
    $54.99
    Add to Cart
    Qty:
    Product description
    Dynamite RC Multi Hex Wrench Set

    Dynamite s Multi Hex Wrench Set gives users one tool for all of their hex driving needs. The multi hex wrench set comes with the 7 most popular hex sizes with drive tips that securely store within the handle for compact storage and convenience. In addition, the drive ends will lock into any electric handheld drill or screwdriver.Wrench includes the following sizes;.050 1/16 5/64 2mm 3/32 3/32 ball 1.5mm 2.5mm All replacement tips can be found under part numbers DYN2951-DYN2957

    • Aluminum anodized handle
    • Hex tips feature a drive end
    • Includes 7 different hex sizes
    • Includes the following sizes; .050", 1/16", 5/64" 2mm, 3/32", 3/32" ball, 1.5mm, 2.5mm
    • Laser etched tips
    • Replacement tips can be found using part numbers (DYN2951-DYN2957)
    • Tips are made from durable, high-grade heat treated steel
    • Tips securely store within handle
    $39.99
    Add to Cart
    Qty:
    Product description
    The Jiggs Up Soldering Jig

    The Jigs Up makes the task of soldering RC connectors simple and easy!

    • Everything included to solder just about any kind o f RC connector made.
    $39.99
    Add to Cart
    Qty:
    Product description
    X-Acto Drill Bit Set w/Stand

    The X-ACTO Drill Bit Set with Stand is a complete and convenient companion for any hobbyist or woodworking enthusiast. The set features 20 X-ACTO quality carbon and steel drill bits ideal for the precision, fine point drilling needed in many craft projects. The plastic covered stand is marked with numbered slots for each bit, making organization and storage easy. X-ACTO blades are designed to allow you to make the careful and detailed cuts you need time and time again. Our blades are created with care and exceptional craftsmanship, producing a cutting edge that stays sharp over a longer period of time. An X-ACTO quality blade is always ready when you need it. The original X-ACTO knife has been praised for more than 50 years as the standard for precision. Attaining this level of precision, accuracy and reliability starts with supreme quality craftsmanship. X-ACTO knife blades are crafted with sharpened carbon steel for a reliable cut and a strong blade. X-ACTO knife blades fit with most X-ACTO knife models. Be sure to match the blade number with the list of compatible blades on your X-ACTO knife's packaging.

    • The X-ACTO Drill Bit Set with Stand is a complete and convenient companion for any hobbyist or woodworking enthusiast. The set features 20 X-ACTO quality carbon and steel drill bits û ideal for the precision, fine point drilling needed in many craft proje
    • The X-ACTO Drill Bit Set with Stand is a complete and convenient companion for any hobbyist or woodworking enthusiast. The set features 20 X-ACTO quality carbon and steel drill bits û ideal for the precision, fine point drilling needed in many craft proje
    • The X-ACTO Drill Bit Set with Stand is a complete and convenient companion for any hobbyist or woodworking enthusiast. The set features 20 X-ACTO quality carbon and steel drill bits û ideal for the precision, fine point drilling needed in many craft proje
    $38.99
    Add to Cart
    Qty:
    Product description
    Donegan Optical OptiVisor AL w/2.5X Lens Plate

    This is the OptiVISOR LX-5 Optical Acrylic Lens Binocular Magnifier by Donegan Optical Company. COMMENTS: Interchangeable lens plates available separately in 3X, 4X, 5X, 7X powers for various applications. kr2/10/03 ir/kh

    $35.99
    Add to Cart
    Qty:
    Product description
    Testors Enamel Paint Finishing Set

    Enamel Finishing Carousel Set

    • Carousel Finishing Set Enamel
    $32.09
    Add to Cart
    Qty:
    Product description
    Testors Carousel Finishing Set Acrylic

    This is a Testors Acrylic Paint Set.

    • Paint set
    $32.09
    Add to Cart
    Qty:
    Product description
    Hobbico Multi-Angle Hobby Vise

    This is the Hobbico Multi-Angle Hobby Vise. Attaches to any workbench. dew 8-30-04 ir/jxs

    • Enamel coated body and chrome-plated, cold rolled steel screws adds to the durability
    • Heavy cast aluminum construction
    • Large C-clamp mount attaches to work surfaces up 2 (51mm) thick
    • Removeable rubber jaw covers prevent marring and protect delicate objects
    • Rotates 360¦
    $31.99
    Add to Cart
    Qty:
    Product description
    Badger Basic Spray Gun Set w/Propel Single Action Bottom

    Basic Spray Gun Set w/Propel Single Action Bottom Feed

    • Adaptable to compressors, CO2 tanks and aerosol propellant cans
    • Operates on 20 to 50 PSI. (1.4 to 3.5 bar)
    • Sprays virtually any properly reduced material
    $30.99
    Add to Cart
    Qty:
    Product description
    Bob Smith Insta-cure Gap Filling 8 oz. CA Glue

    INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

    $29.99
    Add to Cart
    Qty:
    Product description
    Bob Smith Finish-cure 20min Epoxy 13 oz.

    FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.

    $29.99
    Add to Cart
    Qty:
    Product description
    Dynamite Machined Hex Driver Set (4) Met

    Includes:Dynamite machined hex wrench 1.5mm Dynamite machined hex wrench 2.0mm Dynamite machined hex wrench 2.5mm Dynamite machined hex wrench 3.0mm

    • Includes 1.5, 2.0, 2.5, and 3.0mm sizes
    • Rotating end cap
    $29.99
    Add to Cart
    Qty:
    Product description
    Bob Smith Super-gold Odorless Gap 2 oz. CA Glue

    Super-Gold+ Gap Filling CA Glue 2oz

    $29.99
    Add to Cart
    Qty:
    Product description
    Testors Aztek External Mix/Single Action A220 Airbrush Set

    This A220 Single Action, External Mix Airbrush has a lightweight body, with easy-to-adjust controls and patented quick change capability. Used for large area coverage and general spraying. Set includes a cleaning wire. Hose screws easily into top of propellant can to start paint flow.

    $28.99
    Add to Cart
    Qty:
    Product description
    Dremel Versatip Tool Kit with 5 Tips

    Versa-Tip Plus -- Includes: 5 Tips, Tool Stand & Storage Tube

    • Includes One Dremel VersaTip Plus Took Kit One Woodburning Tool (Black plastic handle/UL listed Black cord) One #471 Tip-Universal Woodburning/Leather Crafting One #473 Tip-Script Woodburning/Leather Crafting One #470 Tip-Soldering One #499 Tip-Hot Knife
    • Includes One Dremel VersaTip Plus Took Kit One Woodburning Tool (Black plastic handle/UL listed Black cord) One #471 Tip-Universal Woodburning/Leather Crafting One #473 Tip-Script Woodburning/Leather Crafting One #470 Tip-Soldering One #499 Tip-Hot Knife
    $28.99
    Add to Cart
    Qty:
    Product description
    Iwata-Medea Airhose 10' Braided Nylon

    Airhoses -- 10' Braided Nylon Covered PVC for Iwata

    • 10 long
    • Available for all Iwata airbrushes and RG-3 and W-100 spray guns
    $28.49
    Add to Cart
    Qty:
    Product description
    Testors Flat Enamel Paint Finishing Set

    This is a Plastic Model Finishing Set for Aircraft and Military Figures from Testors.

    $28.29
    Add to Cart
    Qty:
    Product description
    Testors Gloss Enamel Paint Finishing Set

    This is a Plastic Model Finishing Set for Cars and Trucks from Testors.

    $28.29
    Add to Cart
    Qty: