• Painting & Finishing Accessories

  • Showing: 1 - 30 of 127
    Sort by:
    Product description
    Iwata-Medea Hp-Cs Eclipse Airbrush

    This multi-purpose, high-paint-flow, high-detail Eclipse Series airbrush covers a wide range of uses. Commonly used to spray premixed or heavier paints, it is well suited for uses demanding precise control of spray when applying moderate-to-large amounts of paint to a variety of surfaces and to various-sized areas. This Eclipse Series brush has established a new benchmark for excellence in an all-purpose airbrush.

    • Automotive artists, fine artists and students will appreciate how well the Eclipse CS sprays heavier acrylics and Medea Textile Colors, while maintaining high-detail spray characteristics
    • Generous 1/3 oz. sized cup is designed with a new funnel shape, which makes for easy clean up and more efficient paint flow
    • Gravity-feed airbrush features a unique 0.35-mm needle and nozzle combination for fine-detail spraying, but with high-paint-flow capacity
    $174.09
    Add to Cart
    Qty:
    Product description
    Hobbico Mini Air Compressor w/Regulator & Filter

    This is the CP101A Mini Air Compressor with Regulator from Model Maker. COMMENTS: Adapters needed: -Regulator to 5mm , use HCAR4105 -Regulator to 1/8, use HCAR4106 NNA 12/29/04 ir/jxs

    • All moving parts use sealed oil-less bearings
    • Cushioned handle
    • Durable cast aluminum body
    • Maintenance-free operation
    • Manual ON/OFF switch
    • Quiet diaphragm-type compact design
    • Suitable for use with all airbrushes
    $139.99
    Add to Cart
    Qty:
    Product description
    Paasche 1/8 HP D500 Compressor with the R-75 pressure regulator.

    A 1/8 HP compressor with switch and regulator is economical and suitable for all airbrushes. It is capable of delivering 20-40 PSI depending on airbrush being used. The Paasche D500 is an oil-less piston compressor. The R-75 is a low pressure regulator with a 100 psi gauge and moisture drain. This regulator gives control of operating pressure as well as assisting in furnishing clean, dry and regulated air.

    • Operates on 110-120 Volt, 1 phase, 60Hz, and delivers .4 C.F.M. @ 20 P.S.I
    • R75 Regulator will regulate up to 40 P.S.I. depending on usage and size of airbrush being used
    $134.99
    Add to Cart
    Qty:
    Product description
    Paasche Deluxe Extra Fine Airbrush Set (VL-SET)

    No other airbrush can offer more versatility than the VL model. This model can achieve spray patterns from fine detail to broader coverage, handling light, medium and heavy fluids. Fluids are siphon fed from a Color Cup or a Bottle Assembly. The VL has a Tapered Socket for securing Bottle or Cup. Suitable for both left or right-handed users.Airbrush Set Includes:One VL#3 Double-Action AirbrushSize 1 5 spray headsHead Protecting CapOne 1/4 oz. Metal Color CupOne 1 oz. Color Bottle AssemblyOne 1 oz. Bottle and Cover AssemblyOne 6 foot Air HoseHangerWrench"22 Airbrush Lessons" Booklet

    $104.99
    Add to Cart
    Qty:
    Product description
    Badger Airbrush Deluxe Airbrush Kit Medium

    Universal Head Siphon Bottom Feed Deluxe Airbrush Set

    • Non-slip, one-piece trigger
    • PTFE head seal assures efficient air flow
    • Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear
    $79.99
    Add to Cart
    Qty:
    Product description
    Paasche Model H Single-Action Airbrush

    Sturdy and flexible, the Model H Single-Action airbrush is recommended for all skill levels. It has a tapered socket for securing a Bottle Assembly or a Color Cup. Suitable for both left and right-handed users.Set Includes:One H#1 Single-Action AirbrushSizes 3 5 Color Adjusting Parts and AircapsOne 1/4 oz. Metal Color CupOne 1 oz. Color Bottle AssemblyOne 1 oz. Bottle and Cover AssemblyOne 6 foot Air HoseTwo WrenchesHanger"22 Airbrush Lessons" Booklet

    $74.99
    Add to Cart
    Qty:
    Product description
    Badger Medium Head Single Action Bottom Feed Airbrush Set

    Airbrushes -- Model 350 Airbrush Basic Set w/Accessories & Propel - Medium

    • Color cup and one-piece jar adaptor taper-fit for quick color changes
    • Constructed of high-impact nylon
    • Excellent for more volumous spray projects
    • Nozzles/needles made of precision manufactured metals
    • Solvent and chemical resistant
    • Sprays higher viscosity materials
    $54.99
    Add to Cart
    Qty:
    Product description
    Badger Basic Spray Gun Set w/Propel Single Action Bottom

    Basic Spray Gun Set w/Propel Single Action Bottom Feed

    • Adaptable to compressors, CO2 tanks and aerosol propellant cans
    • Operates on 20 to 50 PSI. (1.4 to 3.5 bar)
    • Sprays virtually any properly reduced material
    $30.99
    Add to Cart
    Qty:
    Product description
    Testors Aztek External Mix/Single Action A220 Airbrush Set

    This A220 Single Action, External Mix Airbrush has a lightweight body, with easy-to-adjust controls and patented quick change capability. Used for large area coverage and general spraying. Set includes a cleaning wire. Hose screws easily into top of propellant can to start paint flow.

    $26.99
    Add to Cart
    Qty:
    Product description
    Iwata-Medea Table Top Airbrush Cleaning Station

    With NO OVERSPRAY while cleaning your airbrush, the Table-Top Cleaning Station with an easy-to-clean container proves to be an easy and portable solution for your painting needs. Comes with an easy-to-change filter. *Airbrush not included.

    $26.99
    Add to Cart
    Qty:
    Product description
    Testors Cleaning Station

    Aztek Cleaning Station

    • The Aztek Airbrush Cleaning Station is the most convenient and environmentally sound product for airbrush cleaning ever devised. An airbrush is inserted in the adjustable neck. Solvent is then blown through the airbrush and trapped in the jar. New adapter
    • The Aztek Airbrush Cleaning Station is the most convenient and environmentally sound product for airbrush cleaning ever devised. An airbrush is inserted in the adjustable neck. Solvent is then blown through the airbrush and trapped in the jar. New adapter
    $25.99
    Add to Cart
    Qty:
    Product description
    Iwata-Medea Airhose 10' Braided Nylon

    Airhoses -- 10' Braided Nylon Covered PVC for Iwata

    • 10 long
    • Available for all Iwata airbrushes and RG-3 and W-100 spray guns
    $24.99
    Add to Cart
    Qty:
    Product description
    Badger Basic Spray Gun Single Action Bottom Feed

    Basic Spray Gun Single Action Bottom Feed (Blister/Cd)

    • Adaptable to compressors, CO2 tanks and aerosol propellant cans
    • Operates on 20 to 50 PSI. (1.4 to 3.5 bar)
    • Sprays virtually any properly reduced material
    $21.99
    Add to Cart
    Qty:
    Product description
    Badger 10ft. Braided Airhose Female 1/4" Fitting one end

    10ft. Braided Airhose Female 1/4" Fitting one end w/Integrated Propel Regulator Fitting

    $16.99
    Add to Cart
    Qty:
    Product description
    Testors Aztek Cleaning Station Filters 3pc

    Aztek Cleaning Station Filters (3)

    • Refills for the Airbrush Cleaning Station #9315.
    • Refills for the Airbrush Cleaning Station #9315.
    $15.79
    Add to Cart
    Qty:
    Product description
    Badger Can Propel, Large, 13oz

    Can Propel, large, 14oz./397g. Requires Regulator #50200

    $15.00
    Add to Cart
    Qty:
    Product description
    Testors Paint/Accessories Carousel & Storage System

    Two-tier, revolving carousel holds 18 bottles. The carousel holds three bottle sizes: 1/4oz, 1/2oz, 1oz. The separate storage tray interlocks with the paint carousel tray on either of its four sides. The storage tray is for brushes, cements, hobby tools and more! Durable, solvent-resistant plastic construction.

    $14.65
    Add to Cart
    Qty:
    Product description
    Testors Fineline Nozzle, Tan, 20mm

    This is the Testors Fine Line Nozzle For use with Testors Aztek Airbrush Systems COMMENTS: For use with fine dyes, inks or acrylic paints only. Use Feeder Funnel or 1cc paint cup. Recommended pressure: 5-30psi (0.4-2.1 Bar) For use with A3205 Testors Aztek Workhorse Airbrush Kit TESR4110 A3206 Testors Aztek Intermediate Single Action Internal Mix A4305 Testors Aztek 7 Piece Solo Professional Airbrush Set TESR4115 A4306 Testors Aztek Intermediate Double Action Internal Mix A4308 Testors Aztek 9 Piece Solo Professional Airbrush Set TESR4708 A4702 Testors Aztek Solo Professional Airbrush Set TESR4120 A4307 Testors Aztek Professional Single/Double Action Internal Mix TESR4709 A4709 Testors Aztek Deluxe Professional Airbrush Set TESR7778 A7778 Testors Aztek Master Professional Metal Airbrush Set 5/17/12 pjw ir/jxs

    $13.49
    Add to Cart
    Qty:
    Product description
    Testors Aztek General Purpose Nozzle .40mm Gray

    Aztek General Purpose Nozzle .40mm

    $13.49
    Add to Cart
    Qty:
    Product description
    Testors Aztek High Flow Nozzle .50mm Turquoise

    Aztek High Flow Nozzle .50mm

    • Aztek« airbrush accessories are precisely crafted from the finest materials. Use for Illustration, large areas high gloss acrylic colors, washes & weathering using acrylic paints. Type of paint sprayed airbrushing acrylics, thinned acrylics, airbrush colo
    • Aztek« airbrush accessories are precisely crafted from the finest materials. Use for Illustration, large areas high gloss acrylic colors, washes & weathering using acrylic paints. Type of paint sprayed airbrushing acrylics, thinned acrylics, airbrush colo
    $13.49
    Add to Cart
    Qty:
    Product description
    Testors Aztek General Purpose Acrylic Nozzle .40mm-Black

    Aztek General Purpose Acrylic Nozzle .40mm

    $13.49
    Add to Cart
    Qty:
    Product description
    Testors Aztek High Flow Acrylic Nozzle .50mm White

    Aztek High Flow Acrylic Nozzle .50mm

    • This Aztek High Flow Acrylic Nozzle is used for illustration and medium area coverage using airbrushing acrylics, airbrush colors, and Testors Spraying Acrylics. For use with A320, A430, A470, 1000S, 2000S, 3000S Airbrushes. For best results use 15-30 PSI
    • This Aztek High Flow Acrylic Nozzle is used for illustration and medium area coverage using airbrushing acrylics, airbrush colors, and Testors Spraying Acrylics. For use with A320, A430, A470, 1000S, 2000S, 3000S Airbrushes. For best results use 15-30 PSI
    • This Aztek High Flow Acrylic Nozzle is used for illustration and medium area coverage using airbrushing acrylics, airbrush colors, and Testors Spraying Acrylics. For use with A320, A430, A470, 1000S, 2000S, 3000S Airbrushes. For best results use 15-30 PSI
    $13.49
    Add to Cart
    Qty:
    Product description
    Testors Aztek Large Coverage Nozzle 1.02mm Yellow

    Aztek Large Coverage Nozzle 1.02mm (Yellow)

    • Aztek Large Coverage Nozzle 1.02mm Yellow
    $13.49
    Add to Cart
    Qty:
    Product description
    Paasche Propellant/Pressure Can 12oz.

    This is the Paasche N-12 12oz Can of Pressure Propellant. COMMENTS: Use only in well ventilated area. Do not smoke when using, keep away from flame. Container may explode if heated, Keep out of reach of children. Do not pucture or burn can. Do not breathe fumes. Avoid contact with skin and eyes. jxs 10/18/12 ir/jxs

    $12.95
    Add to Cart
    Qty:
    Product description
    Badger 2OZ Jar & Cover FOR 150/200/250/350

    Airbrush Accessories -- Jars & Covers for Models 200 250 350 & 150 Airbrushes

    • 2 oz. jar
    $11.80
    Add to Cart
    Qty:
    Product description
    Tamiya Modeling Brush Set High Finish Standard

    These are the Tamiya High Finish Modeling Brushes. This can be used with any paint application. Includes: One round pointed tiny detail brush One flat #2 0.20" (5mm) wide brush One flat #0 0.12" (3mm) wide brush

    $11.49
    Add to Cart
    Qty:
    Product description
    Testors Custom Decal System

    Now it's easy to produce your own quality decals with a PC and an ink jet printer. The new Testor Custom Decal Maker allows the model builder to produce high quality decals for any of their model projects. By using the included image database, modelers can choose anything from car flames and graphics to license plates and aircraft markings. Once an image is chosen the modeler can add text, change the color or adjust the images to their needs. An upgrade CD can be bought for only $9.99 which will allow the modeler to import photos and a free form section so modelers can design their own decals for a personalized touch. The upgrade CD can be found at www.decalgear.com The Custom Decal Maker includes two sheets of 5.5x8.5 decal paper one clear and one white, 1 3oz. Can of Decal Bonder and one CD that include the software and designs.

    • Custom Decal System
    $11.49
    Add to Cart
    Qty:
    Product description
    Testors Clear Decal Paper for Inkjet Printer 5.5" x 8.5"

    Decal refill pack for the TES9198 Custom Decal System. Refill pack includes six clear decal sheets.

    • Decal refill pack for the TES9198 Custom Decal System. Refill pack includes six clear 5.5ö X 8.5ö decal sheets.
    • Decal refill pack for the TES9198 Custom Decal System. Refill pack includes six clear 5.5ö X 8.5ö decal sheets.
    $11.29
    Add to Cart
    Qty:
    Product description
    Testors White & Clear Decal Paper for Inkjet Printer 5.5"

    Decal refill pack for the TES9198 Custom Decal System. Refill pack includes three white and three clear decal sheets.

    $11.29
    Add to Cart
    Qty:
    Product description
    Testors White Decal Paper for Inkjet Printer 5.5" x 8.5"

    Decal refill pack for the TES9198 Custom Decal System. Refill pack includes six white decal sheets.

    $11.29
    Add to Cart
    Qty: