This is the Great Planes ElectriFly Power System Brushless Motor Mount. This attaches to the firewall and the electric motor attaches to this mount. rmb 12-20-06 ir/jxs updt jxs 02/29/12
Bulk Swivel Ball Links, 2-56
DU-BRO Dual Swivel Ball Links are ideal for rudder/tailwheel, aileron, or any multiple control hook-up.
Ideal for park flyers. Get the same Du-Bro quality only in an itzy bitzy size. Light weight aluminum design allows for up to .047 wire. 2-56 machine screw securely locks wire into place. Press fit our Mini E/Z Connector into a Mini Servo Arm and secure with snap washer.
Heavy-duty Screw-Lock connectors will allow you to safely secure 4-40 (.093) pushrod wire to your servo arm.
The Great Planes Screw-Lock Connector is Used with the Pushrods to Connect the Elevator and Rudder to the Servos. Updated JBM 1-16-06 Updated 5-11-94 NMH ir/jl
1/4 Scale Turnbuckles
Perfect for many 1/4 scale applications, including strut attachments, flying wires, tailfin stab bracing, and bi-plane aileron connectors. Heavy duty steel and nickel plated.Includes:2 ea Threaded Rods Ends2 ea. solder rod ends4 ea #202 Steel Straps2 ea 12 long .093 diameter rod with 3/4 4-40 Thread4 each 4-40 x 1/4 screws, and 4 each 4-40 nuts
It comes complete with 15 feet of nylon coated cable and all mounting hardware. Ideal for pull-pull installations on rudder, elevator, tail wheels, etc. (22 piece set)
Designed with BIG planes in mind! This product has plenty on clearance from the hinge line with 1 5/32
The Nylon Hinges are Used to Connect Control Surfaces to the airplane, such as the trailing edge of surface and the leading edge of control surface. COMMENTS: Customer will need to purchase the epoxy or CA separately. 4-20-94sk ir/jl Updated:4/12/05 JCT
Battery Compartment with Door for the Ares Decathlon 350
This Micro Pull-Pull system gives you precision control! Comes complete with 4 Du-Bro Mini E/Z Connectors, 8 aluminum crimps, 10 feet of 10 pound test no stretch control line, and 4 micro adjustment pins. The Micro Pull-Pull System weighs 2.2 grams.
Nylon and Carbon filled Gold-N-Rods feature an exclusive spline design that reduces friction and eliminates sensitivity to dirt, dust and moisture. They are very easy to install -- a threaded stud screws into the inner rod, and a clevis attaches to the other end of the stud -- and they are versatile, as they are unaffected by fuel. They can be used for any part of the control system, and are made in sizes and lengths to fit just about any application. Clevises, studs and other hardware are included in all kits. To assemble, simply cut the pieces to length and glue or clamp (see hardware) the outer sheath in place. The threaded studs simply self-thread into the inner rod (easily done with a cordless drill) and the clevises thread onto the studs.
Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 4-40 are for use with .093 dia wire, spring keepers are included.
E/Z Connectors come complete with 12 each Connector, 4-40 x 1/8 Slotted Screw, black snap washer, and push on steel washer.
This is a package of twelve 4-40 threaded steel clevises. COMMENTS: These steel clevises are used to connect a 4-40 pushrod to a control such as a control horn or throttle lever. btm 06/14/94 ir/jl updated 070204 tjt
This is a package of Solder Clevises that are Soldered on the Ends of Pushrods or Cables.
These Pull-Pull systems are available in two sizes, 2-56 and 4-40. It comes complete with 15 feet of nylon coated cable and all mounting hardware. Ideal for pull-pull installations on rudder, elevator, tail wheels, etc. (22 piece set)
Super Hinge Point 3/16 15pc
48" Nylon Gold-N-Rod Push Rod Systems from Sullivan
This is a Sheet of 1/2 Latex Foam Rubber from Hobbico.
This 4-piece set will attach your 1/16 pushrod wire to almost any servo arm, bellcrank, control horn, or throttle rod.
This is a package of Solder Clevises that are Soldered on the Ends Pushrods or Cables. Updated JBM 1-18-06 btm 06/14/94 ir/jl
This 5-Piece Set Will Attach Your 1/16 Pushrod Wire to Almost Any Servo Arm, Bellcrank, Control Horn, or Throttle Rod.
Two 36" Nylon Gold-N-Rod Push Rod Systems from Sullivan.
48" (.056") Metal Cable Gold-N-Rod Push Rod System from Sullivan