Extra-long Extender Tips 24pc.
Extender Tips 6pc.
Extra CA Cover Caps 24pc.
Extra-fine Extender Tips 6pc.
Non-clog Applicator Fine Tip 24pc.
IC-Loc Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue is cured, the fasteners can be disassembled with standard hand tools if required.
IC-Loc™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-Loc Green™ wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners.
IC-Loc™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-Loc Red™ will maintain its strength up to 490º F.
Pocket CA Extenders 6pc.
Non-clog Applicator Regular Tip 24pc.
Extra CA Tops 1/2oz. & 1oz. 12pc.
TUBING TEFLON 2FT
This is a bulk package of (144) Epoxy Brushes from Great Planes.
This is a package of (6) Epoxy Brushes from Great Planes.
This is a package of (50) Epoxy Mixing Sticks from Great Planes.
This is a package of 5 Pro CA Applicator Tips. COMMENTS: Tips attach to the ca bottle tip. JAK 5/10/98 ir/jl
Perfect for applying grease or glue in tight places, this is the 12cc Curved Tip Hobby Syringe from Hobbico.
This is a package of 6 CA Applicator Tips from Hobbico. COMMENTS: Tips attach to the CA bottle tip. ir/jl
Gluing Tips, 5pc
Extender tips allow smaller drops of glue to be placed in hard-to-reach areas. Ten tips, plus a 12" length of micro-dropper tubing. Very handy
Red Baron Debonder is made from a blend of nitromethane and other special solvents. We have found that this blend works better for removing cured CA from skin. Red Baron Debonder will dissolve cured CA’s in approximately one minute. It can be used on a variety of surfaces to remove cured adhesive. It can be used to reposition parts that are glued out of alignment or remove CA from skin. It can be used to loosen the CA from bonded fingers. Just apply a liberal amount of Debonder and allow it to work for about a minute. Then gently roll your fingers to loosen the bond. After they are apart, use additional Debonder to completely remove the cured CA from your skin. Please note that it will damage most plastics and dissolve white foam on contact so it should not be used in these applications
Dispensing Tips 6pc
Quik-Shot Accelerator is formulated to speed up the curing time of all cyanoacrylates without degrading the bonding strength of the adhesive at all. They can be used safely on any bonding surface including clear plastics and white foam. Unlike many accelerator products it will not crack the surface of the adhesive or cause white deposits.
Whip Tips 6pc
Strong fast drying cement is specially formulated for joining wood. Hot fuel proof, Extra fast drying formula cuts drying time in half from twelve hours to six hours.
Strong fast drying cement is specially formulated for joining wood, metal, polystyrene and most rigid plastic.
This is a Package of 5 Glue Tips from Testors.