• Landing Gear, Retracts, Wheels & Skids

  • Showing: 1 - 30 of 127
    Sort by:
    Product description
    E-Flite 10 - 15 90 Degree Rotating Electric Retracts

    Add the realism of functioning retracts to your 10- to 15-sized airplanes. E-flite's completely self-contained retract systems require no air tanks, complex linkages, or even extra servos. They simply need to be bolted into place and plugged into the receiver. A specially designed Y-harness is also included, allowing pilots to use a single receiver channel to control all retract units.

    • Aircraft Weight: 2.00 - 4.50 lb (0.90 - 2.00kg)
    • Built-in over current protection
    • Chrome-plated landing gear strut & bolt on axle
    • Integrated electric motor with a micro PCB
    • Recommended for use in the F4U-1A Corsair by ParkZone (PKZ6075 & PKZ6080)
    • Robust landing gear strut and mounting bracket
    • Scale appearance 90-degree retraction sweep and 90-degree rotation
    • Strut & Axle Diameter .118 inch (3mm)
    $74.99
    Add to Cart
    Qty:
    Product description
    E-Flite 10-15 74 Degree FW-190 Electric Retracts

    Add the realism of functioning retracts to your 10- to 15-sized airplanes. E-flite's completely self-contained retract systems require no air tanks, complex linkages, or even extra servos. They simply need to be bolted into place and plugged into the receiver. A specially designed Y-harness is also included, allowing pilots to use a single receiver channel to control all retract units. Specifically designed for the Parkzone Fw-190A-8, the retracts feature aluminum trunnions and 4mm struts to handle the loads of the long Fw-190 landing gear legs.

    • 4mm strut (.157 in) diameter
    • Aircraft Weight: 2.00 - 4.50 lb (0.90 - 2.00kg)
    • Aluminum trunnion for maximum durability
    • Built-in over current protection
    • Integrated electric motor with a micro PCB
    • Recommended for use in the Focke-Wulf FW-190A-8 by ParkZone (PKZ6250)
    • Robust landing gear strut and mounting bracket
    • Scale appearance 74 degree retraction angle
    $69.99
    Add to Cart
    Qty:
    Product description
    E-Flite 10 To 15 Size Main Electric Retracts

    You don t have to be a master modeler to add the realism of functioning retracts to your airplane. The completely self-contained E-flite retract system requires no air tank, complex linkages or extra servo. It can simply be bolted into place and plugged into the receiver. A specially-designed Y-harness is included that allows for the use of a single receiver channel to control all retract units.

    • Built-in overcurrent protection
    • Integrated electric motor with a micro PCB
    • Robust landing gear strut and mounting bracket
    • Aircraft Weight: 2.00 - 4.50 lb (0.90 - 2.00kg)
    • Strut Diameter .118 inch (3mm)
    • Strut Diameter .118 inch (3mm)
    $69.99
    Add to Cart
    Qty:
    Product description
    Hobbyzone Float Set: Super Cub LP

    If you have progressed past the teach-yourself-to-fly stage and are looking to add even more excitement to your RC flight experience, the Super Cub float set is the perfect option. This lightweight, Z-Foam float set includes a larger prop (10x8) to maximize the performance of the Cub on floats. These floats are a Zone 3 product, and are not recommended for beginners due to the difficulty of flying off of water.

    • Can be utilized with original Super Cub thanks to included rear float mount
    • Includes a high-performance 10x8 propeller
    • Packaged with all mounting hardware, including pre-bent wire struts
    • Pre-built and sealed Z-Foam for remarkably easy installation
    • Weigh 5.5 ounces (150 grams)
    $24.99
    Add to Cart
    Qty:
    Product description
    E-Flite UMX Carbon Cub SS Float Set

    The UMX Carbon Cub SS float set is a great option that adds even more excitement to your RC flight experience. This lightweight, molded-foam float set includes everything needed to complete the floatplane conversion. Assembly and installation take only minutes. The rugged wire struts assure the proper stance on the water for smooth tracking and easy takeoffs from the water.

    • Attaches to factory-installed mounts in the UMX Carbon Cub SS (EFLU1180)
    • Floatplane option takes only minutes to complete
    • Lightweight design with efficient hull shape
    • Mounting hardware included with pre-bent wire struts
    • Painted with authentic scale appeal
    $19.99
    Add to Cart
    Qty:
    Product description
    Du-Bro Wheels Treaded Lite 4"

    Tire Width 1.150 in (29.21mm). Large Scale Treaded Lightweight wheels are substantially lighter than other aircraft wheels available. These lightweight wheels feature a foam interior yet have a tough and rugged exterior skin for durability. Excellent for paved runways! Hubs come with 3/16 in (5mm) axle diameter opening and can be drilled out to 1/4 in (6mm).

    • 2 per package
    • feature a foam interior
    • tough and rugged exterior skin for durability
    • 1 per package
    $16.59
    Add to Cart
    Qty:
    Product description
    Du-Bro Landing Gear .35 - .50

    For .35-.60 size airplanes. Our super quality landing gear will absorb landings without bending out of shape. Featuring a one piece design, this Hi-Strength, glass enforced landing gear can be painted and weighs less than aluminum. Easy to install too! Approx. 14 1/2" wide X 4 1/2" high

    • 1 per package
    • can be painted
    • one piece design
    • weighs less than aluminum
    • will absorb landings without bending
    $16.29
    Add to Cart
    Qty:
    Product description
    Sullivan Tailwheel Bracket .60-1/4 10-22Lb

    Sullivan Tailwheel Bracket 60-1/4 10-22 lbsThis is a complete tailwheel bracket for airplanes. This attaches to the bottom of the airplane and the bottom of the rudder so you dont have to worry about drilling holes in the rudder. 60size to 1/4 scale planes

    • 2 steering springs (1 heavy, 1 light) for desired steering input
    • 3/32" diameter spring steel axle
    • Solid plastic bracket mount
    • Tailwheel Not Included
    $14.69
    Add to Cart
    Qty:
    Product description
    Sullivan 860 Tailwheel Bracket 40-60

    Sullivan's Tailwheel Bracket for 5 to 12 pounds airplanes

    • Axle size: 5/64"
    • Easy to install with only two bolts
    • Springs absorbs both ground bumps and steering shocks to protect models and servos
    $13.65
    Add to Cart
    Qty:
    Product description
    Sullivan 859 Tailwheel Bracket 20-40

    Sullivan Tailwheel Bracket 20-40 2-6 lbsThis is a complete tailwheel bracket for airplanes. This attaches to the bottom of the airplane and the bottom of the rudder so you dont have to worry about drilling holes in the rudder. For 20 -40 sized planes.

    • 1/16" diameter spring steel axle
    • 2 steering springs ( 1 heavy, 1 light ) for desired steering input
    • Solid plastic bracket mount
    • Tailwheel Not Included
    $13.39
    Add to Cart
    Qty:
    Product description
    Du-Bro 3-1/2” Diameter Treaded Lightweight Wheel 2pc

    5/32 Axle (4mm) After 3 years of research and development, we have produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

    • 2 per package
    • built extremely TUFF
    • fuel resistant
    • lightweight
    • shock absorbing
    $12.59
    Add to Cart
    Qty:
    Product description
    Du-Bro Park Flyer Snow Skis 2pc

    Let it snow, let it snow, let it snow! Don't let the winter months keep you grounded, fly your electric park flyer year round with the DU-BRO Park Flyer Snow Ski's. The DU-BRO Park Flyer Snow Ski's are vacuum formed ABS material with two runners on each ski for excellent tracking and sterring. Ski's also include a spring system to allow for flex on take offs and landings, yet remain in a positive position while in flight. Best of all, the DU-BRO Park Flyer Snow Ski's mount on your aircraft in just minutes.

    • 1 set per package
    • mount on your aircraft in just minutes
    • spring system to allow for flex on take offs and landings, yet remain in a positive position while in flight
    $12.19
    Add to Cart
    Qty:
    Product description
    Du-Bro 3” Diameter Treaded Lightweight Wheel 2pc

    5/32 Axle (4mm) After 3 years of research and development, we have produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

    • 2 per package
    • built extremely TUFF
    • fuel resistant
    • lightweight
    • shock absorbing
    $10.99
    Add to Cart
    Qty:
    Product description
    Ares Decathlon 350 Landing Gear with Wheel Pants and Decals

    Landing Gear with Wheel Pants and Decals for the Ares Decathlon 350

    • Landing Gear with Wheel Pants and Decals
    $9.99
    Add to Cart
    Qty:
    Product description
    Du-Bro 2-1/2” Diameter Treaded Lightweight Wheel 2pc

    5/32 Axle (4mm) After 3 years of research and development, we have produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

    • 2 per package
    • fuel resistant
    • lightweight
    • shock absorbing
    $9.65
    Add to Cart
    Qty:
    Product description
    Du-Bro 2-1/4 inch Diameter Treaded Lightweight Wheel 2pc

    5/32 Axle (4mm) After 3 years of research and development, we have produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

    • 2 per package
    • built extremely TUFF
    • fuel resistant
    • lightweight
    • shock absorbing
    $9.09
    Add to Cart
    Qty:
    Product description
    Ares P-51D Mustang 350 Main Landing Gear Set

    Ares P-51D Mustang 350 Main Landing Gear Set

    $8.99
    Add to Cart
    Qty:
    Product description
    Du-Bro 1/4X3-3/8" Axles 2pc

    Bolts to any dural landing gear. Easy installation. Available in four sizes. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

    • 2 per package
    • Spring Steel Zinc Plated
    $8.65
    Add to Cart
    Qty:
    Product description
    Du-Bro 3" Diameter Super Lightweight Wheels 2pc

    By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models.

    • 2 per package
    • Closed cell treaded foam wheel
    • Exceptionally light weight
    • nylon hub
    $8.49
    Add to Cart
    Qty:
    Product description
    Du-Bro 3-1/2 inch Diameter Treaded Surface Wheels 2pc

    350T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass paved runways.

    • 2 per package
    • complete with a sporty nylon metallic hub
    • thickness is consistent throughout the wheel
    • Works well on grass & paved runways.
    $8.09
    Add to Cart
    Qty:
    Product description
    Du-Bro 2-3/4" Diameter Super Lightweight Wheels 2pc

    By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models.

    • 2 per package
    • Closed cell treaded foam wheel
    • Exceptionally light weight
    • nylon hub
    $7.99
    Add to Cart
    Qty:
    Product description
    Du-Bro 3-1/4 inch Dia. Treaded Surface Wheels 2pc

    325T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass paved runways.

    • 2 per package
    • a balanced tire
    • sporty nylon metallic hub
    • Works well on grass & paved runways.
    $7.79
    Add to Cart
    Qty:
    Product description
    Du-Bro 3 inch Diameter Treaded Surface Wheels 2pc

    DUB300T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass paved runways.

    • 2 per package
    • Works well on grass & paved runways.
    $7.19
    Add to Cart
    Qty:
    Product description
    Du-Bro 3” Diameter Smooth Surface Wheels 2pc

    300R takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass paved runways.

    • 2 per package
    • sporty nylon metallic hub
    $7.19
    Add to Cart
    Qty:
    Product description
    Ares Ultra-Micro Trainer Main Landing Gear Set

    (No description)

    • Includes main landing gear set
    $6.99
    Add to Cart
    Qty:
    Product description
    Great Planes Nose Gear Bent w/Hardware

    This is a Nosegear assembly for replacing the exsisting gear or adapting an airplane to a front nose gear set up. It includes everything necessary for installation onto a plane (except tools). COMMENTS: Nosegear wire is pre-bent at the bottom for the wheel to mount on. For a straight nose gear assembly use GPMQ4261. gab6/11/94 ir/jl

    • This is a Nosegear assembly for replacing the exsisting gear or adapting an / airplane to a front nose gear set up. It includes everything necessary for / installation onto a plane (except tools). / / INCLUDES: One 6-1/2 Chrome plated nosegear wire
    • This is a Nosegear assembly for replacing the exsisting gear or adapting an / airplane to a front nose gear set up. It includes everything necessary for / installation onto a plane (except tools). / / INCLUDES: One 6-1/2 Chrome plated nosegear wire
    • This is a Nosegear assembly for replacing the exsisting gear or adapting an / airplane to a front nose gear set up. It includes everything necessary for / installation onto a plane (except tools). / / INCLUDES: One 6-1/2 Chrome plated nosegear wire
    $6.99
    Add to Cart
    Qty:
    Product description
    Ares Nano-Micro Stick Main Landing Gear Set

    Main landing gear set for the Nano-Micro Stick

    • Main Landing Gear
    $6.99
    Add to Cart
    Qty:
    Product description
    Du-Bro 2-3/4 inch Diameter Treaded Surface Wheels 2pc

    275T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass paved runways.

    • 2 per package
    • sporty nylon metallic hub
    $6.95
    Add to Cart
    Qty: