• Kits - Cars & Buggys

  • Showing: 1 - 6 of 6
    Sort by:
    Product description
    Team Associated 30109 RC10TC6.2 Factory Team Kit

    This is the 1/10 scale Associated Electric Powered, Radio Controlled, RC10TC6.2 Factory Team Worlds 4WD Car Kit. **Body Shown In Picture Is Not Included.** COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Stock Number 2 10x15mm Front Spool 1 DTXC1595 2 10x15mm Rear Diff 1 DTXC1595 2 4x8mm flanged Spur Gear Shaft 1 DTXC1517 4 5x10mm Steering Blocks 2 DTXC1535 4 5x10mm Rear Hubs 2 DTXC1535 jxs 11/11/13

    • (High
    • Ball Bearings: Full set, 22 total
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis, caster blocks adjust 14, 16, or 18 degrees with molded inserts
    • Chassis: Ultra narrow 0.088 (2.25mm) thick carbon fiber with optimized flex and maximum chassis roll ground clearance
    • Definition Roll Control) system, roll stiffness is controlled and adjusted by two wires mounted into an aluminum center member and linked to the suspension arms, center member rolls on a bearing surface to reduce friction and provide ultra precise movement cross compatible with all TC6.1 suspension components
    • Drive: Four wheel belt drive
    • Shock Towers: Carbon fiberSuspension: Front and rear anti-roll bars with the H.D.R.C.
    • Shocks: Factory Team VCS3 with hard anodized aluminum threaded bodies with bottom loaded seals
    • Spur Gear: Nylon construction, 87 tooth 48 pitch
    • Steering: Multi-position system allows fine tuning of Ackermann steering rates, Ackermann refers to the effect of the inner front wheel rotating faster than the outer front wheel during turns
    $419.99
    Add to Cart
    Qty:
    Product description
    Team Associated  8022  RC10R5.1 Factory Team Kit

    This is the Radio Controlled, Electric Powered, 1/10 scale Factory Team RC10R5.1 On-Road Pan Car Kit from Team Associated. COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 3 3/8x1/4 Differential 2 DTXC1433 2 3/8x1/4 Rear Axle 1 DTXC1433 4 1/8x5/16 Front Wheels 2 DTXC1403 jxs 12/06/12 ir/jxs

    • Chassis: Carbon fiber 0.10 (2.5mm) thick with chassis stiffening rails that provide a centralized LiPo battery mounting position that fits ROAR-approved 3.7V and 7.4V LiPo batteries, and allows front-to-rear weight bias adjustments
    • Drive: Rear wheel
    • Front Suspension: Dynamic Strut design with symmetrical components and adjustable caster and track width, updated lower control arms for more accurate mounting
    • Motor Mount: with 3-point upper pod plate with graphite motor mount crossbrace
    • Rear Suspension: Pivot ball rear pod with hard anodized pivot balls at each point and separate adjustment of roll and bump, rear aluminum bulkheads are tied together with carbon fiber motor mount cross brace for greater rigidity
    $299.99
    Add to Cart
    Qty:
    Product description
    Team Associated RC10 Worlds Car Kit

    This is the 1/10 scale Electric Powered, Radio Controlled, Team Associated RC 10 World's Car Kit. **Additional Technical Info Will Be Added When It Becomes Available.** COMMENTS:

    • Ball Bearings: Full set, 16 total
    • Body: Clear polycarbonate Turbo Mirage, vintage style decals, 5.5 (140mm) wing
    • Chassis: Black hard anodized 6061-T6 machined aluminum monocoque with graphite brace, and fiber composite battery strap
    • Drive: Rear wheel with CVA axle drivetrain
    • Front Axles: Inline aluminum with 30¦ caster blocks
    • Shock Towers: Composite fiber
    • Shocks: V2 threaded hard anodized 6061-T6 aluminum coilover type with molded bleeder caps
    • Suspension: Independent, with durable long front arms and refined geometry
    • Transmission: Stealth 3-gear type with ball differential, and graphite brace, V2 slipper assembly with molded gear cover
    $264.99
    Add to Cart
    Qty:
    Product description
    Team Associated B5M Team Kit

    This is the 1/10 scale Electric Powered, Radio Controlled, Team Associated RC10B5M Team Buggy Kit. Purposely designed to excel on high-grip and high-speed tracks. Body; Length: 12.2 (310mm) Width: 4.5 (114mm) Height: 2.8 (71mm) COMMENTS: For Replacement Ball Bearings use Qty. Size Location Qty. Bearing Set 4 3x7mm Steering 2 DTXC1506 4 5x10mm Front Uprights 2 DTXC1535 2 6x12mm Gearbox 1 DTXC1569 2 10x15mm Gearbox 1 DTXC1595 4 5x10mm Idler Gear 2 DTXC1535 2 10x15mm Rear Hubs 1 DTXC1595 2 6x13mm Rear Hubs 1 DTXC1573 jxs 12/26/13 ir/jxs

    • Ackermann adjustments, Ackermann describes the effect of the inner front wheel turning faster that the outer front wheel during turns
    • Body: B5 clear
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Aluminum, fits ROAR approved 2S saddle and short packs using the included foam insert
    • Differential: 14 carbide ball type with lightweight outdrives
    • Differentials: Ball type with lightweight outdrives
    • Drive: Rear wheel
    • Front Suspension: Gullwing type with heavy duty steering and caster blocks, and insert system allows easy caster and trailing axle adjustments
    • Shocks: Factory Team V2 12mm Big Bore hard anodized aluminum
    • Steering: Full ball bearing with horizontal ball studs for finer
    • Transmission: New design has ball bearings, stronger gears, VTS slipper clutch
    • Wheels: Plastic white dish type front, 0.94 (24mm) wide, 2.4 (61mm) diameter, rear 1.5 (38mm) wide, 2.4 (61mm) diameter
    • Wheels: Plastic white dish type front, 0.94 (24mm) wide, 2.4 (61mm) diameter, rear 1.5 (38mm) wide, 2.4 (61mm) diameter
    $259.99
    Add to Cart
    Qty:
    Product description
    Team Associated 30101 TC4 Club Racer Kit

    This is the electric powered, radio controlled, 1/10 scale TC4 Club Racer Kit from Team Associated. COMMENTS: Instruction manual not included jxs 05/03/12 ir/jxs

    • Ball Bearings: Full set, 22 total
    • Chassis:
    • Drive: Four wheel shaft with lightweight composite CVD drive bones
    • Motor Mount: Machined aluminum with cooling fins for increased heat dissipation
    • Shocks: Composite body VCS fluid filled shocks with adjustable ride height
    $149.99
    Add to Cart
    Qty:
    Product description
    OBALL FOOTBALL

    This flexible, bendable football will quickly become baby’s favorite toy! The multiple finger holes make this football easy to grasp, squeeze and throw. Smooth, flexible design makes this the perfect football for little hands to hold.

    • The finger holes make it easy for baby to grasp, squeeze and throw
    • Smooth, flexible patented design makes the Oball Football soft and captivating for little hands
    • Perfect for kids of all ages
    $7.99
    Add to Cart
    Qty: