This 9-piece combo has everthing you need to make a complete Field Box. **For specifications and further info on each item click on the stock numbers** JAL 2/21/96 updt jxs 3/21/03 updt jxs 6/25/03 updt jxs 5/19/06 updt jxs 7/28/11
This is the Pre-Built Master Caddy with APS (Auxiliary Power Station). This Field Box carries all the accessories you need to maintain and fly your airplane and the APS Tote detaches for convenient flight line use. COMMENTS: The hole for the Power Panel is intentionally cut smaller to accommodate many different panels. JAL 1/1/00 ir/jl updt mcw 5/19/04 updt jxs 4/10/07
The Robart Super Stand II makes for a great building platform, its sturdy, lightweight, and waterproof, and it is unaffected by glow fuel. Soft rubber pads will not harm or scratch your models. The Super Stand II quickly sets up for any building, maintenance, or transportation needs.
This is a Digital Voltmeter MkIII from Hobbico. Tests 4, 5 & 8 cell R/C batteries in a no-load or a simulated R/C load setting. COMMENTS: The modeler may purchase the preceding pre-made Rx and Tx connectors: _ However, you CANNOT test diode-protected Tx packs with voltmeters through the radio charge jack. The pack MUST BE REMOVED from the transmitter to get an accurate voltage reading. Modelers can make their own connectors by purchasing one HCAP0310 Banana Plugs, 16 Gauge Wire, and their radio connector
Power your Electric Field Equipment from a single 12V source with the Deluxe Power Panel. It provides 12V power to your electric starter, 12V or 6V fuel pump, or 12V PULSED power to your glow plug clip. A variable control knob and meter let you adjust glow plug current, detect engine problems, and check for burned-out plugs. This Power Panel has a One-Year Warranty. **New Features over the Old Power Panel include: On-board constant charger delivers 300-400mA for glow igniter and has a Green LED when glow igniter is being charged. Power all Field Equipment from a single 12V Field Battery. MOSFET-driven glow heat adjustment and a new glow starter charger pack even more power and convenience into a traditional sized Power Panel. COMMENTS: This charger delivers approximately 300-400mA of continuous current Charging a glow starter for approximately 45-60 minutes will supply enough amperage to start an engine multiple times. jim 10.10.01 ir/kh
This is the VoltWatch2 on-board Receiver Battery Monitor for 4.8V and 6V NiCd and NiMH receiver packs. This mounts on the outside of the airplane, so you can see at a glance the status of the receiver battery mounted inside. COMMENTS: This has a Futaba J connector pre-installed. For radios other than Futaba, you will have to change or modify the plug. Because of reverse polarity, if you would like to use this with the older Airtronics batteries, you must also purchase AIRM4400 kpm12/15/2004 ir/jxs
With an easy-to-read LCD display and built-in safety features, the convenience and accuracy of this tool can t be beat. The battery checking function precisely reviews the voltage of each cell of a lithium polymer pack while displaying the remaining total capacity. The balance operation equalizes the individual voltages of each cell until the difference between each reaches 0.01 volts or less. Although most LiPo packs' balancing ports will plug directly into the LiPo Checker, an adapter for Thunder Power and Flight Power style plugs is also included. Please be certain only to use lithium polymer battery packs up to 6 cells (6S).
This is a Durable, Long-Lasting Workstand Designed to Safely Hold Model Airplanes while Building or Maintaining them.
This is the Great Planes Pro Series Lithium Voltmeter LVM 2-6S. jxs 04/18/11 ir/jxs
This is the 2-8S LiPo LiIon and LiFe Voltage Monitor from Venom. jxs 01/03/12 ir/jxs