Piston, Sleeve Set: TRX 3.3
Complete Carburetor: TRX 2.5, 3.3
This is the Front and Rear Ball Bearing set for the Traxxas 2.5 nitro engine. COMMENTS: Front Bearing features front rubber seal. NNA 2/26/03 ir/jxs
This is the Connecting Rod for the Traxxas 2.5 and 3.3 Engine. This part connects the piston to the crankshaft. cmc 10/27/02 ir/kh
This is the Pullstart Assembly for the HPI T-15 Engine. ajw 12/21/03 ir/jxs
This is the stock replacement Recoil Assembly for the HPI .21BB Engine. This is to be attached to the engine backplate.
This is the Recoil Starter used on the HPI Nitro Star K4.6, HPIG1501.
New from HPI is the Roto Start system for the HPI K Series engines, including the extremely powerful K4.6! The HPI Roto Start system replaces the standard pullstarter with a durable metal gear backplate and a handheld shaft driven starter, making starting engine as simple as pressing a button. Available in two versions, one with the complete Roto Start handheld starter plus the engine backplate, and another with just the engine backplate.Requires a 7.2v rechargeable "stick" battery pack and charger. #2029 HPI Ni-Cd Battery Pack and #9058 Overnight Charger for 7.2v Ni-Cd Battery (AC120v) recommended. Some disassembly of the kit and engine is required. Complete instructions are included.
This is the Pullstart Shaft Holder for the HPI Nitro Star K5.9 (HPIG5250) COMMENTS: Most people would refer to this as the one-way bearing. cnh 7/3/08 ir/jxs UPGX3/15/13
Our Pull Starts can be swapped out for other starting options, but for basic, inexpensive starting these pull starts can't be beat.
This is the new version replacement pull-start assembly for the Team Associated AE 15 buggy engine.
One Way Bearing: TMX, Revo, SLY
Use the TRX recoil pull starter for racing applications where weight savings are critical. It is engineered for long-lasting, trouble free operation. It includes a heavy-duty spring and cord. Installation requires the starter backplate (#5274) and starter shaft (#5277) (EZ-Start equipped motors already have these parts installed). If the engine was not originally equipped with a starter, then a different crankshaft is also required. Use Traxxas part 5219 (IPS) or 5221 (multi-shaft) crankshaft.
This is the One-Way bearing for the HPI Nitro Star 21BB engine. This One-Way Bearing allows the recoil starter to grab the crankshaft to start the engine and spin freely in the opposite direction.
** Also fits the Roto Start for the Savage.**
For use with Pro.15 engines. For racing applications where weight savings are critical.
Carburetor Body: TRX 2.5, Revo 3.3 (1)
This is the Team Integy Motor Heatsink with Side Mount Cooling Fan. This heatsink snaps onto the motor can. ajw 9-20-05 ir/jxs
One-Way Starter BB:.12,.15
Includes: Air filter body (high-volume), filter support, cap, foam filter, pre-filter, Revo air filter base (angled), wire mount, and hardware (1 each)
Air Filter Body (1):TMX 3.3, TMX
This is the Glitch Buster Capacitor from Novak Electronics. jxs 11/01/06 ir/jxs
Velineon 3500 Rebuild kit includes 11x5x5mm ball bearings (2), 2.5x5mm BCS (2), front and rear bushings
0400 CC Blower Monster Motor Cooling Fan & Shroud
Cooling Fan & Shroud for 36mm & 1400 Motors
Extra Hard Steel 5m/m Bore (1.0 module) Brushless Motor Pinions. One 4x4 m/m set screw included. These pinions mate with most 1/8 scale nitro spur gears
Air Filter Complete:TMX 2.5, 3.3
This is the Replacement Backplate for the Traxxas 2.5 engine. This backplate is used on the 2.5 equipped with EZ starter. cmc 10/27/02 ir/kh
Includes: engine mount, engine mount spacers (2), 3x15 CS with washers (4), 4x18 BCS (2), flathead engine mount screws 3x10 (2)
Air Filter Housing, Foam Insert:Revo
Air Filter Housing for the Jato