• Covering Materials

  • Showing: 1 - 30 of 78
    Sort by:
    Product description
    Hangar 9 Ultracote Pearl Blue

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $22.99
    Add to Cart
    Qty:
    Product description
    Topflite Monokote Metallic Plum 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1403) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4128 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $17.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Chrome 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1209) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. LustreKote Paint: NONE MonoKote Trim Sheet: TOPQ4110 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $17.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Metallic Blue 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1402) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: NONE MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $17.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Aluminum 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1205) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4105 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive is Activated When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only .2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $17.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote True Red

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote White

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote Bright Yellow

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote Silver

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote Cub Yellow

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote True Red 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1227) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4227 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Corsair Blue

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Transp Red

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .18 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Deep Red

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Orange

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote Flame Red

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Midnight Blue

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Dark Yellow

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 UltraCote Black

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Hangar 9 Ultracote Deep Blue

    Hangar 9 UltraCote is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F.

    • Fuel proof to glow fuel, gas, and smoke oil. Water proof as well.
    • High tech polyester covering
    • Light weight at .30 oz/sq. ft.
    • Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model.
    • Unique multi temperature-controlled adhesive shrinkage system
    • Versatile and easy to apply
    $15.99
    Add to Cart
    Qty:
    Product description
    Topflite Monokote Transparent Blue 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1304) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. LustreKote Paint: NONE MonoKote Trim Sheet: NONE MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $15.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Transparent Red 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1305) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. LustreKote Paint: NONE MonoKote Trim Sheet: NONE MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $14.99
    Add to Cart
    Qty:
    Product description
    Coverite 8oz. Balsarite Film

    Balsarite is a Clear Liquid that is used to Prep the Wood Surface Before Applying Covering. Balsarite absorbs into the wood to waterproof, strenghthen, and increase the adhesion. **NOT FOR USE ON MICAFILM** COMMENTS: To Thin Balsarite Film, use Trim Solvent, TOPR6020 For the 16oz Can, use COVR2520. For Fabric Coverings, use COVR2500 JAL 9/18/98 ir/jl

    • EconoKote, UltraCote, 21st Century Film, Black Baron Film and other similar coverings
    • This is for use with Film Coverings such as MonoKote, TowerKote,
    $14.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Transparent Yellow 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1303) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. LustreKote Paint: NONE MonoKote Trim Sheet: NONE MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $14.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Clear 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is inexpensive easy, clean, and (when compared to old fashioned coverings) quick to use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. REQUIRED: Sealing Iron (TOPR2100), Iron Sock (TOPR2175), Heat Gun (TOPR2000) COMMENTS: Not for use directly on foam! Suggest EconoKote for foam (TOPQ2601-TOPQ2612) Matching MonoKote Trim Sheet: NONE Matching EconoKote Covering: NONE (EconoKote can be used on top of, but not under MonoKote.) If using 3 or more rolls of the same color, suggest a 25' roll (TOPQ1200) to ensure the same dye lot for the entire plane. Temperature ranges: Attaching to wood (activating the glue): 215 - 240¦F Partial shrinkage: 230 - 270¦F Maximum shrinkage: 270 - 350¦F JAL 8/28/98 ir/jl

    • Dry adhesive is activated when heat is applied
    • Fuelproof and waterproof
    • High gloss finish
    • Lightweight at only .1 oz/sq ft
    • Shrinks to a drum-tight finish as it cools
    • Stronger and lighter than traditional silk and dope coverings
    • Super strong polyester covering with a tensile strength of 25, 000 psi (pounds/sq in)
    $14.99
    Add to Cart
    Qty:
    Product description
    Topflite Monokote Sky Blue 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1206) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4122 MonoKote Flat: TOPQ0506 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2606-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive is Activated When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $13.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Dark Red 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1218) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4118 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2601-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive is Activated When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $13.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Orange 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1202) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4102 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2602-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive Activates When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only .2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $13.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Yellow 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1203) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4103 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2603-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive is Activated When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only .2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $13.99
    Add to Cart
    Qty:
    Product description
    Topflite MonoKote Black 6'

    MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive, Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use. For great covering ideas and to insure a professional finish, order the MonoKote Covering Instructional DVD, TOPZ0105. COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In Color Between Production Runs of These Products. If Using Three or More Rolls of the Same Color, it is Suggested to Use a 25' Roll (TOPQ1208) To Ensure the Same Dye Lot for the Entire Model Being Covered. LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color. MonoKote Trim Sheet: TOPQ4109 MonoKote Flat: TOPQ0508 MonoKote is a High Temperature Covering, NOT For Use Directly On Foam EconoKote IS For Use Directly On Foam, Use the Following: EconoKote Covering: TOPQ2608-TOPQ2612 (EconoKote may be used on top of, but not under MonoKote.) Temperature Ranges: Attaching to Wood: 215 - 240¦F (activating the glue) Partial Shrinkage: 230 - 270¦F Maximum Shrinkage: 270 - 350¦F ir/jl

    • Dry Adhesive is Activated When Heat is Applied
    • Fuelproof and Waterproof
    • High Gloss Finish
    • Lightweight at Only 0.2 oz/sq ft
    • Shrinks to a Drum-Tight Finish As It Cools
    • Stronger and Lighter Than Traditional Silk and Dope Coverings
    • Super Strong with a Tensile Strength of 25, 000 psi (pounds/sq in)
    $13.99
    Add to Cart
    Qty: