INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Super-Gold+ Gap Filling CA Glue 2oz
Red Baron Odor Free CA’s are completely odorless, foam safe cyanoacrylates, but will bond any material that our regular line of Red Baron CA products will. Because it is different chemically, many people who are allergic to regular CA’s can often use Red Baron Odor Free CA’s without problems. Unlike many other odorless CAs in the market place today, there is very little compromise in bonding strength or curing times. They have practically the same bonding strengths (almost two tons in tensile strength) and curing times as our regular CA products.
SUPER-GOLD™ is odorless INSTA-CURE CAs. It is non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic.
SUPER-GOLD™cures to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Attention:Because of shipping restrictions this product cannot be sold to Canada.
Pacer ZIP KICKER Super-Glue accelerator is the best working accelerator for ZAP and other super glues you'll ever find! A little spritz works in seconds.
The Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's extender tip #304 works on the Pocket CA and all our other tops.
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Red Baron Flex-Tuff CA™ is a clear, rubber toughened cyanoacrylate that gives you a degree of flexibility in a CA that never before was possible. Cured joints will bend and have better shock strength than any regular CA product. They are perfect for joints that must move or bend with use. Flex-Tuff CAs also have excellent impact resistance, peel strength, and are excellent for bonding a variety of dissimilar materials like metals, rubbers, and plastics. They are also great for use on firewalls, bulkheads, landing gear mounts, servo rails to fiberglass fuselages, or other areas that will be subjected to shock and high levels of vibration. They work well in high humidity and have excellent thermo-cycling properties.
CA Glue Max Thick 2oz.
IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires.
INSTA-FLEX™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE™, INSTA-FLEX™ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1/16" hole in the center of the hinge slots to insure the complete saturation of the hinge when INSTA-FLEX™ is applied. INSTA-FLEX™ has a different, less irritating odor compared to regular CA's, but still can not be used on white foam. INSTA-FLEX™ has also proven to be superior when bonding anodized aluminum.
MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.
MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.
Gets into tight places. The aerosol version is compatible with all ZAP products, as well as other CA brands, an dis safe on plastics 5 oz. can.
Red Baron Thin formula has a viscosity or thickness of 5 cps (centipoise). Water has a viscosity of 0 cps making our Thin CA about the same as water. Because of its low viscosity, it will penetrate deeply into joints and bond them extremely well. It is best used for tacking structures together, repairing cracks in balsa or any hardwood, edge joints, and with wetting fiberglass cloth to reinforcing structures. Structures to be bonded must fit together tightly as the Thin formula will not form a glue fillet. Cure time takes only a few seconds and this process can give off an irritating vapor so it is a good idea to use this adhesive with good ventilation.
Red Baron Medium has a viscosity of 500 cps which makes it an excellent choice for general construction or small repairs around the house. Our Medium formula bonds in 5-15 seconds and will form a glue fillets making them perfect for bonding loose fitting joints. They will also work on tight fitting joints as the adhesive will penetrate into the joint well especially on a porous substrate like balsa.
Thick and strong for high-stress areas. Ideal for laminating and forming fillets. Allows you 30 seconds to position; cures in 60 sec.
Super thin water-like consistency. Superior penetrating formula. Works on most materials. Bonds and cures in 1-5 seconds. Best for "tacking" applications.